2014+ Toyota Tundra SQ1 Image Dynamics Turnkey Packaged System

Rated 5.00 out of 5 based on 15 customer ratings
(15 customer reviews)

$2,199.00

Description

2014+ Toyota Tundra SQ1 Turnkey Packaged System

For the last 10 years we have been installing systems in Toyota Tundras here in San Antonio. This package includes everything you will need to install a system in your Toyota Tundra CrewMax.

This turnkey package includes the following:

Tacotunes ReCurve EZQ - Copy
Tacotunes ReCurve EZQ –

The ReCurve EZQ bundle includes:
1 – ReCurve EZQ
1 – ReCurve EZQ Wire Harness System (Please indicate JBL or NON JBL)
1 – ReCurve EZQ Bass Control Knob

NOTE: This harness system will utilize your stock wring. You will NOT need to run new speaker wire to each door. In addition, the harness system connects directly to your your new TXD plug and play amps.

Amplifiers: 

TXD3204v2 – tacotunes.com 4 channel amplifier 4 x 100 watts RMS to each speaker
TXD1000.1 – tacotunes.com mono subwoofer amp 1000 x 1 RMS to sub(s)
Tundra Amp Rack included
mounting bolts, flange nuts & grommets

Front Door Speakers (Driver & Passenger):

Image Dynamics CXS64 Component Speakers

Toyota Tundra CXS64 Component Speakers Installation Kit

Toyota Tundra CXS64 Component Speakers Installation Kit (125 watts RMS):

2 – Image Dynamics CXS64 6.75″  Component Speakers, Tweeters & Crossovers
2 – Front Door Speaker Mounts (Heavy Duty) & 1/4″ spacers
2 – Speaker Harness Adapters- 36″ 16 gauge wire
2 – Crossover Mounts

NOTE: Tweeters must be installed in (door) sail panel

Rear Door Speakers (Driver & Passenger):

Image Dynamics CTX65CS Component Speakers

Toyota Tundra Image Dynamics CTX65CS Component Speakers
Toyota Tundra Image Dynamics CTX65CS Component Speakers

The following items are included with this bundle set (100 watts RMS):

2 -Image Dynamics CTX65CS / ID65CS 6.75″  Component Speakers, Tweeters & Crossovers
2 – Rear Door Speaker Mounts (Heavy Duty)
2 – Speaker Harness Adapters – NON JBL
2 – Tweeter Harness Adapters – JBL

These tweeters fit in the stock door location (rear) with very little modification. They slide directly into the existing tweeter location.

Dual 10″ Subwoofer Box & 10″ Subwoofers

Tacotunes Dual 10″ Subwoofer Box & Image Dynamics Subwoofers

NOTE: For you megabass heads that want a lot of SPL and willing to give up some SQ, we have a dual 12″ subwoofer with full size Image Dynamics ID12s.  Be sure to check out our videos on selecting subwoofers for your Toyota Tundra.

Toyota Tundra CrewMax Subwoofer Box Enclosure 2014+
Toyota Tundra CrewMax Subwoofer Box Enclosure 2014+

The following is included in this bundle set:

1 – tacotunes.com dual 10″ subwoofer box
2 – Image Dynamics ID10V4 4 Ohm 10″ Subwoofers to match the output of the TXD1000.1 Amp (Full size subs NOT shallow mounts)
1 – terminal cup
1 – subwoofer wiring kit

Toyota Tundra Amp, Sub and Speaker Installation Kit:

When you are installing an amplifier you will need a kit that includes a number of parts to get the job done right. We provide the following items to get the job done right.
Installation & Wiring Products.

TXD Amp Installation Kit:

TXD Plug and Play Amp Power Kit
TXD Plug and Play Amp Power Kit

Kit includes:

1 – tacotunes.com Mini ANL Fuse Holder
1 – tacotunes.com 4 gauge to 8 gauge distribution block
1 – 2.5′ 4 gauge tacotunes.com OFC – battery connection with terminal ring attached (red)
1 – 13′  4 gauge tacotunes.com OFC – amplifier power wire (red)
2 – 10″ 8 gauge tacotunes.com OFC – amp power wire (red)
2 – 24″ 8 gauge tacotunes.com OFC – amplifier ground wire with ring terminals attached (black)
1 – 100 amp Mini ANL BLUE Fuse (battery)
1 – 60 amp Mini ANL YELLOW Fuse (TXD10001 Amp)
1 – 40 amp Mini ANL ORANGE use (TXD6001 Amp)
1 – 30 amp Mini ANL RED Fuse (TXD3204 Amp)
1 – 10MM grounding bolt
1 – 5/16″ self tapping grounding bolt
20 – cable ties
1 – 6′ 3/8″ split loom
1 – 3′ 1/4″ split loom
2 – #8 x 5/8 Black Screw

Limited / Platinum / 1794 (Power Passenger Seat)
1 12′ RCA CABLE Twisted Pair – 6 Channel (Front / Rear / Sub)
2  – #8/Black Screws

NOTE: ReCurve will be mounted under rear driver side seat.

SR5 (Non-Power Passenger Seat)
5 – 1.5 RCA Cables (Front / Rear / Sub)
2 – Recurve Mounting Brackets
2 – 8/32 Bolt & Flange Nuts
1 – 16′ 16 Gauge Ground with Ring Terminal
1 – 25′ Primary Blue Remote Turn on wire

NOTE: ReCurve will be mounted under passenger seat above plug and play amps.

Misc Items:

10 Crimp Caps
8 Speaker Terminals .25 (Door speakers)
4 Speaker Terminals .187 (tweeters)
4 Speaker Terminal .25 (subwoofer)
15 Small Zip Ties
15 Large Zip Ties
Discounted Shipping
Telephone Support

 

Click here for installation steps:

Additional information

Weight 69 lbs
Dimensions 50 x 22 x 13 in

Share your thoughts!

5 out of 5 stars

15 reviews

Let us know what you think...

0 reviews with a 1-star rating

There are no reviews with a 1-star rating yet

×

Login

Register

Continue as a Guest

Don't have an account? Sign Up