ReCurve EZQ User Manual installation and setup guide (NON JBL)
Welcome to the ReCurve EZQ User Manual installation and setup guide. Below we have a list of videos and the user manual to help you setup the ReCurve EZQ. We highly recommend that you watch the videos and read the entire manual before you begin the installation process. You might even want to setup a “dry run” on your living room floor to see how the entire audio system will tie together. Plan ahead and the installation will go much smoother. We are updating the videos and manual regularly keep checking back.
Professional Installers:
DO NOT CUT OR SPLICE FACTORY WIRES!!! READ THE INSTRUCTIONS!
We understand you know what are you doing. However, the ReCurve EZQ does not work in the manner you are accustomed to . . it is not a one size fit all device . . . all of your questions will be answered if you take the time to review the instructions. Most of our support issues come from professional installers that rush through the installation process.
Toyota owners, be sure to convey to your installer to review the installation instructions.
Vehicle Specific Information:
If you have one of the following vehicles please click the following link for additional information:
Test Tones:
The link below will re-direct to our Dropbox folder that contains a number of test tones. Copy the wav files to your pc and burn as an audio CD. Try to avoid converting them to MP3 or AAC format. For your convenience each test tone is 9 minutes long. The down side is they will take a bit longer to download.
Tools you will need:
In addition to regular tools you will need, below is a list of specialty tools that you will want to be sure you have before you begin the installation.
Inexpensive digital multi-meter
Suggested tools for setting up your amp(s):
ReCurve Setup Videos / Manual:
How to wire up / connect the ReCurve EZQ
How to setup the output levels on the ReCurve EZQ