2007-2013 Tundra Plug and Play add a subwoofer harness use with amps or powered subs

  • THIS PRODUCT IS FOR NON JBL ONLY!
  • CONNECTS BEHIND YOUR HEAD UNIT.
  • WILL NOT WORK FOR 4-5 CH AMPS.

Description

2007-2013 Tundra Plug and Play add a subwoofer harness:

This plug and play harness makes adding a subwoofer to your stock system fast and easy. No need to cut or splice your factory wiring. Simply insert the plug behind the head unit (stereo), run the 19-foot leads to your amplifier or line out converter and you are ready to add some bass to your truck.

Be sure to check out our plug and play amps for your Toyota Tundra CrewMax. They quickly take your stock system from 18 watts to 100 watts RMS to each speaker. In addition, our subwoofer amplifier will power your subs between 600 & 1000 watts RMS.

This kit is offered in two part setup.

Harness 1: 

This harness is setup to acquire the signal from the Left / Right rear speaker output. They are colored coded to standard 12V industry colors. If your amp accepts high level input, then it will most likely have an auto start feature. You will want to confirm by checking the manual for your amp.

Green – Left Rear Speaker (+)
Green with Black Stripe – Left Rear Speaker (-)

Purple – Right Rear Speaker (+)
Purple with Black Stripe Right – Rear Speaker (-)

Harness 2:

This harness is setup to provide a signal wire for amps that do NOT have auto start. This harness will send a signal that will turn your amp on/off when the car is turned on/off.

NOTE: Our plug and play amplifiers do not require a remote “turn-on” wire.

Additional information

Weight .35 lbs
Dimensions 7 × 2 × .75 in

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.

×

Login

Register

Continue as a Guest

Don't have an account? Sign Up

You may also like…