How to install speakers in FJ Cruiser and remove door panels
How to install speakers in FJ Cruiser and remove door panels
Below are pictures and instructions on how to install speakers into your FJ Cruiser.
We are going to cover the steps necessary to remove the door panels and install speakers in your Toyota FJ Cruiser. Using these instructions you can install aftermarket speakers quickly and easily. Be sure to check out our installation products for your FJ Cruiser.
After market speakers installed in an FJ Cruiser
We recommend that you pre-drill the holes for the speakers before you attempt to drive the holding screws into the heavy duty plastic.
Place the speaker mounts as shown and then attach the speakers to the tacotnes.com speaker mounts.
In the next steps we will show you how to remove the door panels in your FJ Cruiser.
This trim piece is removed by gently pressing the center “button” and then pulling out as one unit.
This trim piece is removed by gently pressing the center “button” and then pulling out as one unit.
Using a knife or tool, you will pry away the beauty panel.
Here you can see the beauty panel removed and the screw is exposed. Remove this screw.
Using the same knife or tool, pry up the beauty cover as shown. Take care to avoid scratching your door panel
Remove the screw as shown.
Remove the screw as shown.
Using a plastic tool or your finger nails you can easily “pop” open the power window/lock control panel.
Using a plastic tool or your finger nails you can easily “pop” open the power window/lock control panel.
