Posted on by

ALPINE SPR 17S Component Speakers – Toyota 4Runner

Alpine SPR 17S Component Speakers Toyota 4Runner
Alpine SPR 17S Component Speakers Toyota 4Runner

ALPINE SPR 17S Component Speakers

Toyota 4Runner ALPINE SPR 17S Component Speakers

To install ALPINE SPR 17S Component Speakers into your Toyota 4Runner, you will want to use tacotunes.com speaker adapters designed to work in your 4Runner. The ALPINE SPR 17S Component Speakers require a 5.4” cutout diameter for the mid range speakers. The ALPINE SPR 17S Component Speakers tweeters will require a 2″ cutout diameter.

Click HERE to check out our audio products for your Toyota 4Runner

The ALPINE SPR 17S Component Speakers will fit you your Toyota 4Runner without any cutting, drilling or modifying your 4Runner.

Summary:

Mid range Driver: 5.4″ cutout diameter

Tweeter: 2″ cutout diameter

Top Mount Depth: 2 – 5/16″

MANUAL PDF
These speakers have been test fit to work in the front doors Toyota Tacoma 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014


 

SPECIFICATIONS

Features and Specification

SPECIFICATIONS Power Handling

  • CEA-2031 Power Rating: 110 Watts
  • Power Handling Capacity (RMS): 110 Watts
  • Power Handling Capacity (Peak): 330 Watts

Dimensions

  • Tweeter Mounting Diameter (mm): 51mm
  • Tweeter Mounting Diameter (in): 2”
  • Tweeter Mounting Depth (mm): 3/4”
  • Tweeter Mounting Depth (in): 18.3mm
  • Woofer Diameter (mm): 165.1mm
  • Woofer Diameter (in): 6-1/2”
  • Woofer Mounting Diameter (mm): 136mm
  • Woofer Mounting Diameter (in): 5-11/32”
  • Woofer Mounting Depth (mm): 59mm
  • Woofer Mounting Depth (in): 2-5/16”
  • Crossover Size (mm): 115.4mm x 73mm x 32mm
  • Crossover Size (in): 4-9/16” x 2-7/8” x 1-1/4”

General

  • Frequency Response: 65Hz – 27kHz
  • Impedence: 4 Ohms
  • Sensitivity: 87dB / W(1m)

FEATURES Tweeter

  • Tweeter Type: Bright, Crisp 1” Ring Tweeter with Resonance Absorber
  • Mounting Design: Shallow Mounting Design
  • Application Type / Design Detail: External / Swivel Tweeter Mounting Kit
  • Magnet Material: Ultra Low Distortion Magnet Design

Woofer

  • Dustcap Detail: Kevlar Reinforced, Phase Integrated Dustcap
  • Cone Material: Varnish Multi-Layer Cap & Cone
  • Motor Technology: Linear Drive Technology
  • Voice Coil Type: Large Square-Wire Short Voice Coil
  • Cooling: Optimized Air-Flow Design
  • Magnet: High Grade Strontium Magnet
  • Mounting: Shallow Mounting Design
  • Frame: Rigid Custom Cast Aluminum Frame
  • Mounting Adapters: Mounting Adapter Kit Included

Crossover Network

  • Grade: Professional Grade Network
  • Case Design: Sleek Crossover Case
  • Attenuation Control: 7-Level Tweeter Attenuation
  • Mounting: Shallow Mounting Design

Upgraded Design, Quality Sound Reproduction

Experience greater detail and impact of your music with the hybrid layered-pulp with mica coating woofer cone and new 1″ ring tweeter. A new external network design with seven-level tweeter adjustment allows for precise tuning, while the hidden screw terminal gives a sleek appearance. Adjust the tuning of your speakers using the crossovers to individually perform fine adjustments of the tweeter level. Ultimately, get far more detail and bright and crisp sound reproduction for a great sounding, loud system.

Easy Installation

Installation is made fast and easy with a shallower mounting depth, and basket design. A 6″x8″ mounting adapter plate is also included for fitment, so this solution is versatile to fit in many vehicles (Only Available on SPR-17S and SPR-13S). Choose from multiple models of both components and coaxials to fit the needs of your car.

Better Balance & Staging

The coaxial models feature a 1″ swivel ring tweeter to improve off-axis response in less than ideal installation locations. You can aim it by hand for best sound balance and staging, pointing at the optimum listening position.

Smooth High Frequency

Resonance Absorbers are used to ensure “focused” tonal playback, eliminating unwanted reverberating sound.

Accurate Tweeter Control

Ultra Low Distortion Magnet Design uses extra copper and large neodymium magnet is used to create accurate speaker control, ensuring low distortion and high tonal accuracy.

Fine-Tuned Multi-Layer Cone

New shape & cone materials are used in the Type-R series. The cone uses a combination of thick top-coated varnish, special fibers and glue, and rigorous pressure testing to ensure a lighter and strong material for smooth consistent performance.

Faithful to the Original Sound

The High-performance Linear Drive Motor structure has a large magnet that is almost as big as the voice coil diameter. Its dual radial magnet and twin gap combined with a square, edge-wound voice coil gives the diaphragm linear movement over a much greater range. This means the speaker is faithful to the input signal even during high excursion, for accurate musical reproduction and deep bass.

Superior Efficiency and Linearity

Alpine’s exclusive design allows wider music range playback, tonal and stable balance with greater excursion, and precise speaker movement for accurate music reproduction and deep bass.

Sound, High Power Handling

A large flat copper wounding on the woofer voice coil is used for high power handling and fluid movement during music playback. This contributes great sound and durable performance from the speaker.