2019 Toyota Tundra Baller System: Our Biggest CrewMax Audio Upgrade
A huge thank you to Misael for making his way out to our shop from Austin!!
Vehicle
2019 Toyota Tundra CrewMax
System
Baller
Posted
December 2023
Shop
Taco Tunes, San Antonio, TX
Misael was bored with the capabilities of his OEM speakers. So, he came into our shop and set his 2019 Tundra up with our BALLER system. The biggest system we offer 😉
How the Taco Tunes system installs
Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results! In 2020 Tundra’s come equipped from the Factory Apple Car Play / Android Auto.
TacoTunes’ complete system is plug and play, completely reversible AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.
Our audio system will work with your stock stereo and most aftermarket head units.
tacotunes.com BALLER SYSTEM
Front Door Component Speakers: tacotunes.com CXS64 Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; CXS64 Mid bass Drivers -150 Watts RMS; CXS64 Crossovers; CXS64 Tweeters; tacotunes.com sail panels with tacotunes tweeters
Rear Door Components: TT65CS rear door components.; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass drivers Handles -120 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters will fit in stock door location
Amps: Exile Four channel amplifier; 1500.1 mono subwoofer amplifier
Install photos
TacoTunes dual 12inch subwoofer enclosures assembled and waitng to be installed!Our Tacotunes Fiberglass subwoofer enclosure provides MAXIMUM air space behind your rear seat. Allowing your subs to be used to their full potential.CXS64 Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. The CXS64 consist of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels. The laser cut crossover mount provides a secure mounting location. There is no need to settle for OEM style speakers AND do NOT recommend using mis-matched coaxial speakersA closer look at the CXS64 Front Door midbass drivertweeters are mounted in our sail panels. They consist of complete plug and play wiring, which requires ZERO cutting and splicing of your factory wires, making their installation 100% reversible. Tweeter audio frequencies are HIGHLY directional. For the best listening experience, we suggest placing these up high and out of the way where nothing can block the higher frequencies.Component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or low-end coaxial speakers4 Channel amp under the passenger front seatSubwoofer 1500w amp under the driver’s seatThe crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door in the rear door. Don’t settle for low end OEM style!
New tweeter installed in stock door location.A closer look at the TT65cs rear door midbass driverOur Tundra direct integration system will provide astonishing sound quality and allow you to keep your stock head unit. Most of our customers do not want to change their head unit. However, if you later decide to upgrade, our amps are designed to work with just about any aftermarket option. Whether you keep your stock one, or go aftermarket, our tundra direct integration plug and play harness will require NO cutting or splicing any of your factory wiring. The installation can be easily 100% reversed back to OEM equipment… Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mentionKeep under your hood clean from those loose single fuses with our Laser Cut / CNC Bent Fuse Holder Bracket! Makes adding aftermarket electrical upgrades MUCH easier AND organized!Driver’s side rear door stripped of its OEM speakers and matted!
Frequently asked questions
What is the Taco Tunes Baller system?
The Baller is our biggest Tundra CrewMax system, built around larger amplifiers and dual subwoofers for customers who want the most output we offer, still with plug-and-play wiring.
Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?
Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.
Do customers really drive hours for a Taco Tunes install?
Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.