2014 Toyota Tundra CrewMax System 1 for Road-Trip Sound
A huge thank you to Justin for making his way out to our shop from DALLAS. An 8 hour round trip!
Vehicle
2014 Toyota Tundra CrewMax
System
System 1
Posted
February 2023
Shop
Taco Tunes, San Antonio, TX
Justin isn’t the biggest bass head, but was ready to upgrade his truck’s sound to make his listening experience more road trip worthy…. SO, we set his 2014 Crew Max up with our System 1.
How the Taco Tunes system installs
Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results! In 2020 Tundra’s come equipped from the Factory Apple Car Play / Android Auto.
Our complete system is plug and play completely reversible ( ZERO cutting and splicing of stock wires) AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.
Our audio system will work with your stock stereo and most aftermarket head units.
tacotunes.com System 1A
Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters; tacotunes.com sail panels with tacotunes tweeters
Rear Door Components: TT65cs component speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65cs component speakers Handle -100 watts RMS; TT65CS Crossover
Amp: tacotunes.com TXD10005 5 channel amplifier; 75 watts to each door speaker & 350 watts (RMS) to your subwoofer
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Single 10 or 12″ subwoofer
Install photos
Our Tacotunes.com single 12” subwoofer box fits like a glove behind your rear seat!Tacotunes.com TT65cs Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. Our TT65cs consist of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels. The laser cut crossover mount provides a secure mounting location. There is no need to settle for OEM style speakers AND do NOT recommend using mis-matched coaxial speakers.A closer look at the front door TT65cs midbass driverOur TT65CS tweeters are mounted in our sail panels. They also use complete plug and play wiring to connect to your stock wiring. This makes their installation capable of being reversed 100% back to OEM products. Tweeter audio frequencies are HIGHLY directional. To achieve the best listening experience possible, we recommend you place these up high where nothing can block the higher frequencies.This is what the stock tweeter looks like in your 2nd gen tundra.
NOTE: Your stock tweeters are made from paper cones, handle approximately 10w at 4 Ohms. It is important to use the same resistance when replacing your stock tweeters/speakers.
We offer plug and play wiring that makes it easy to install new tweeters/speakers, without having to cut or splice any wires.The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door in the rear door. Don’t settle for low end OEM style!
New tweeter installed in stock door location.A closer look at the rear door TT65cs midbass driverNotice the Molex plugs from our plug and play wiring harness connected to the back of the amp.Our Tundra direct integration system will provide astonishing sound quality and allow you to keep your stock head unit. Most of our customers do not want to change their head unit. However, if you later decide to upgrade, our amps are designed to work with just about any aftermarket option. Whether you keep your stock one, or go aftermarket, our tundra direct integration plug and play harness will require NO cutting or splicing any of your factory wiring. The installation can be easily 100% reversed back to OEM equipment… Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Bass knob installed in the cupholder for easy access, allowing you to adjust your subwoofers to your liking!Simplicity is something some people outgrow. But not here, these simple built trucks are some of our faves!This tundra had a 4runner install bay neighbor!
Frequently asked questions
Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?
Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.
Do customers really drive hours for a Taco Tunes install?
Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.
What is the difference between System 1A and System 1B?
System 1A is our streamlined package with front components, rear coaxials, a multi-channel amp and a single sub. System 1B steps up to more speakers, more power and dual subwoofers.