Posted on

Image Dynamics CTX65CS Component Speakers Tweeters – Toyota Camry

Image Dynamics CTX65CS Component Speakers Tweeters

Image Dynamics CTX65CS Component Speakers Tweeters installing in your Toyota Camry

Click HERE to check out our audio products for your Toyota Camry

Tacotunes.com is Image Dynamics Authorized. Please visit our shopping cart to purchase Image Dynamics CTX65CS Component Speakers Tweeters bundled with the parts you will need to get them installed quickly and easily.

Image Dynamics CTX65CS Toyota Camry
Image Dynamics CTX65CS Toyota Camry

Image Dynamics CTX65CS Component Speakers Tweeters

Image Dynamics CTX65CS Component Speakers Tweeters: CTX Component Speakers are the affordable solution for the sound enthusiast seeking a high performance speaker system. Their high efficiency provides incredible detail and very high output levels while producing rich well-balanced sound with excellent tonal characteristics. More than the sum of the parts, the CTX components feature a long excursion mid-woofer design that handles high-power amplifiers effortlessly with low distortion allowing higher output levels. The Silk dome CTX tweeters deliver the dynamics and detail without listening fatigue or harshness.The CTX components performance is the product of proper materials and a well executed engineering design. This translates to neodymium magnet silk dome tweeters with swivel mount, mica-polymer composite cones that are stiff, yet light and well-damped butyl rubber surrounds. Crossover with 250 volt metalized polypropylene capacitors air core inductors and 3 position tweeter level control.

Speaker Size: 6.5″

Resistance: 4 OHM Component

Rated Output: 25 -100w

Sensitivity: 89db

Frequency Range: 55Hz – 25kHz

Top Mount Depth: 2.75″

Image Dynamics CTX65CS Component Speaker Manual Toyota Camry

Posted on

Alpine SPS 110TW Tweeters – Toyota Camry

Alpine SPS 110TW Tweeters

How to install Alpine SPS 110TW Tweeters in your Toyota Camry

Below you will find instructions on how to install Alpine SPS 110TW Tweeters. Please be sure to watch our videos on how to install the tweeter mounts. When you order these from our site, you will want to specify a custom size cutout @ 2.07″ cutout

Click HERE to check out our audio products for your Toyota Camry

Alpine SPS 110TW Tweeters Manual Toyota Camry

alpine sps 110 tweeters toyota Camry
alpine sps 110 tweeters toyota Camry

 

 

  • 1″ silk dome tweeters
  • flush-, top-, and bottom-mount hardware included
  • external crossovers with 4-way level control
  • power handling: 5-150 watts RMS (450 watts peak power)
  • frequency response: 1,000-29,000 Hz
  • impedance: 4 ohms
  • sensitivity: 88 dB
  • flush-mount depth: 11/16″
  • warranty: 1 year

Alpine SPS 110TW Tweeters Toyota Camry

The Look You Want

The Type-S Component tweeters include a removable logo, so you can go for a high-profile look or keep it stealth… your choice.

Easy to Install

Type-S Component tweeters come with a 15-degree swivel flush cup mount and and stealth OEM mount for easy integration into any car. Plus, at only ¾” deep (flush mount), they will fit virtually anywhere.

The Type-S component tweeter borrows some Type-R technology like a copper-clad aluminum voice coil, copper shorting cap, high-grade neodymium magnet, and aluminum bobbin. These features mean that the SPS-110TW deliver best-in-class power handling of 100 watts RMS and 300 watts peak, so turn up the volume!

High Power Handling for High Volume

The Type-S component tweeter borrows some Type R technology like a copper-clad aluminum voice coil, copper shorting cap, high-grade neodymium magnet, and aluminum bobbin. These features mean that the SPS-110TW deliver best-in-class power handling of 100 watts RMS and 300 watts peak, so turn up the volume!

In-Line Crossover Included

The small in-line crossover network provides a 12 dB/Octave slope and uses high-grade electrical components for clean sound. It’s small size also makes installation a snap.

Smooth Operator

The SPS’s 1” pure silk dome tweeter diaphragm is designed for wide frequency range and high efficiency, while never sounding harsh or shrill

Add great-sounding highs to any system… affordably.

The same great tweeter that is included with the Type-S Component speakers is now available as a separate component. Now you can add on an efficient, affordable tweeter to any OEM or aftermarket sound system with ease.

Add great-sounding highs to any system… affordably.

The same great tweeter that is included with the Type-S Component speakers is now available as a separate component. Now you can add on an efficient, affordable tweeter to any OEM or aftermarket sound system with ease.

Posted on

Pioneer TS T110 tweeters – Toyota Camry

Pioneer TS T110 tweeters

Pioneer TS-T110 Tweeter Toyota Camry
Pioneer TS-T110 Tweeter Toyota Camry

 

 

How to install Pioneer TS-T110 Tweeters in your Toyota Camry

When you order these from our site, you will want to specify a custom size cutout @ 2.007″ cutout

Click HERE to check out our audio products for your Toyota Camry

The light and responsive TS-T110 hard dome tweeters will give you a dramatic improvement in high frequency response and imaging. They feature a high-pass in-line crossover and can be flush- or surface-mounted.

Pioneer TS-T110 Tweeter Manual


Tweeter Composition: PPTA

Specifications

Sensitivity: 90 dB

Frequency Response: 2500 – 30k Hz

4 Ohm

RMS Power: 2- 40 watts RMS

Overall Diamter: 2 5/16″

Mounting Depth: 15/16″

 

 

Posted on

Boston Acoustics Pro60 SE Component Speakers – Toyota Camry

Boston Acoustics Pro60 SE Component Speakers Toyota Camry
Boston Acoustics Pro60 SE Component Speakers Toyota Camry

Boston Acoustics Pro60 SE Component Speakers

Toyota Camry Boston Acoustics Pro60 SE Component Speakers

To install Boston Acoustics Pro60 SE Component Speakers into your Toyota Camry, you will want to use tacotunes.com speaker adapters designed to work in your Camry. The Boston Acoustics Pro60 SE Component Speakers require a 5.3 cutout diameter for the mid range speakers. The Boston Acoustics Pro60 SE Component Speakers tweeters will require a 1.75″ cutout diameter.

Click HERE to check out our audio products for your Toyota Camry

The Boston Acoustics Pro60 SE Component Speakers will fit you your Toyota Camry without any cutting, drilling or modifications to your Camry.

Summary:

Mid range Driver: 5.3″ cutout diameter

Tweeter: 1.75″ cutout diameter

Top Mount Depth: 2 1/2″

Boston Acoustics Pro60 SE Component Speakers Manual Toyota Camry

[TACOFCS]



Specifications

Nominal Impedance 3 ohm
Mounting Depth 2-3/8″ (60mm)
Frequency Response (±3dB in car) 50Hz-22kHz
System Type 2-way
Speaker Size 6-1/2″
Rated RMS Power Handling 125 watts
Mounting Cutout Diameter 5 1/4” (133mm)
Mounting Depth with Spacer 2-1/16″ (52mm)

Overview of Boston Acoustics Pro60 SE

  • 6½” copolymer cone woofer with neodymium magnet 1½-inch voice coil
  • RadiaVent® cooling and Twinstage™ heat sink for increased power handling
  • Cast aluminum woofer basket
  • 1″ Type-M1 anodized alloy dome tweeter with full AMD™
  • Separable and dockable crossovers
  • VariMount™ adapter rings allow for fast installation
  • Axis-, flush-, and angle-mount tweeter mounting kit

Check us out at:

Friend us on Facebook:http://facebook.com/tacotunes

Website: https://tacotunes.com

Add us a friend on Facebook: http://facebook.com/tacotunes

YouTube: http://youtube.com/tacotunes

Follow Us on Twitter: http://twitter.com/tacotunes

 

Posted on

Polk Audio MM6501 Component Speakers – Toyota Camry

Polk Audio MM6501 Component Speakers Toyota Camry
Polk Audio MM6501 Component Speakers Toyota Camry

Polk Audio MM6501 Component Speakers

Toyota Camry Polk Audio MM6501 Component Speakers

To install Polk Audio MM6501 Component Speakers into your Toyota Camry, you will want to use tacotunes.com speaker adapters designed to work in your Camry. The Polk Audio MM6501 Component Speakers require a 5.1″ cutout diameter for the mid range speakers. The Polk Audio MM6501 Component Speakers tweeters will require a 1.945″ cutout diameter.

Click HERE to check out our audio products for your Toyota Camry

The Polk Audio MM6501 Component Speakers will fit you your Toyota Camry without any cutting, drilling or modifying your Camry.

Summary:

Mid range Driver: 5.1″ cutout diameter

Tweeter: 1.945″ cutout diameter

Top Mount Depth: 2 5/8″

Polk Audio MM6501 Component Speaker Manual Toyota Camry

[TACOFCS]


Designed to Perform

Our flagship MM component system, the MM6501 is the result of 3 years of Polk research and development. The MM6501 has been designed to offer unparalleled sound quality with exceptional fit to meet virtually any application. Borrowing technology from our flagship SR Series, the MM6501 offers extraordinary performance at a price that’s too good to believe.

MM6501 Features:

Dynamic Balance® driver technology for pure, distortion free sound.

Neodymium is a rare earth material we use in all MM driver magnets, excluding 461P, that are about 1/10 the weight of a comparable ceramic magnet and much more powerful. The smaller magnet means the MM6501 components fit easily into more applications.

Carbon composite basket based on the spokes of a wheel is lightweight, absolutely will not flex during peaks and looks great.

Woven glass composite cones feature tremendous stiffness-to mass ratio. Lower mass means faster transients and finer detail.

Klippel optimized components for consistent, distortion-free sound.

Marine Certified ensures the MM6501 is built tough to withstand the harshest environments on the water.

Large-diameter voice coil (30mm) in driver increases reliability and power handling.

Wheel-inspired style combines with rugged durability in the MM grille.

Multiple mount tweeters allow surface or flush mounting.

All Polk products are made using the best materials and the most advanced manufacturing techniques. They pass the industry’s most exhaustive quality tests, including drop testing, extreme signal response and UV & salt exposure testing. Polk loudspeakers are built to perform for a lifetime.

 

Tools required to for basic speaker installation:

If you will be performing a basic installation where you will power the speakers from your head unit, you will need the following tools:

1 – Small slotted head screwdriver

1 – # 2 Phillips head screwdriver

1 – 10mm socket & ratchet

Tools required for advanced speaker installation:

If you will be performing and advanced installation where you will be powering the speakers with a high power amplifier AND running new speaker wire you will need the following tools:

1 – wire strippers

1 – wire crimpers

1 – small zip ties

1 – speaker quick disconnects

Be sure to watch our videos. They will answer most of your questions or concerns regarding speaker installation.

Posted on

Polk Audio DXi6500 Component Speakers – Toyota Camry

Polk Audio DXI6500 Component Speakers Toyota Camry
Polk Audio DXI6500 Component Speakers Toyota Camry

Polk Audio DXi6500 Component Speakers

Toyota Camry Polk Audio DXi6500 Component Speakers

To install Polk Audio DXi6500 Component Speakers into your Toyota Camry you will want to use our Standard size 5.1″ cutout diameter for the mid range speakers, the tweeter will require a 1.945″ custom sized hole.

Click HERE to check out our audio products for your Toyota Camry

Summary:

Mid range Driver: 5.1″ cutout diameter

Tweeter : 1.945″ cutout diameter

Top Mount Depth: 2.0″

Polk Audio DXI6500 Component Speaker Manual Toyota Camry

[TACOFCS]


 

DXi6500 Features:

Your Ride. Our Sound.

Our flagship DXi component system, the DXi6500, has been created to offer unparalleled sound quality with exceptional fit to meet virtually any application-on land or on water. This 6 1/2-inch component system includes mid-range drivers, tweeters and crossovers.

Klippel motor optimization uses laser measurement technology to ensure a smooth excursion path at either end of the volume spectrum for uniform performance at both low and high volumes.

Polk’s proprietary, patented Dynamic Balance® technology allows our engineers to design out distortion-causing driver and system resonances, so you only hear the good sounds.

Composite cones feature tremendous stiffness-to-mass ratio. Lower mass means faster transients and finer detail.

1-inch liquid-cooled silk/polymer composite dome tweeter for clear, detailed highs.

2nd-order Butterworth outboard crossover for component system sound-at a coaxial price.

Flush & surface swivel mount cups are supplied for easy install flexibility.

Vented crossover housing gives you a choice of hidden wire channels for easier, more professional looking installs.

Electronic tweeter protection circuit protects your tweeters from abuse for reliable high output sound.

Marine Certified ensures the DXi6500 is built tough to withstand the harshest environments on the water.

All Polk products are made using the best materials and the most advanced manufacturing techniques. They pass the industry’s most exhaustive quality tests, including drop testing, extreme signal response and UV & salt exposure testing. Polk loudspeakers are built to perform for a lifetime.

 

Driver Complement

Tweeter
Quantity 2
Diameter 1″ (2.54cm)
Type Silk polymer dome
Mid / Woofer
Quantity 2
Diameter 6 1/2″ (16.51cm)
Type Dynamic Balance driver with composite cone driver

Electrical

Total Frequency Response 35Hz-23kHz
Nominal Impedance 4 ohms
Efficiency 92 dB
Power Handling
Continuous 100 watts
Peak 300 watts

Dimensions

Cut-Out Diameter 5″ (12.70cm)
Tweeter Cut-Out Diameter 2 1/16″ (5.24cm)
Grille
Height 15/16″ (2.38cm)
Full-Range Mounting Depth
Top Mount 2″ (5.08cm)
Bottom Mount 2 1/4″ (5.71cm)
Tweeter Mounting Depth
Flush Mount Depth 7/8″ (2.22cm)
Surface Mount Height 1 1/8″ (2.86cm)

Shipping

Unit of Measure system

Warranty

Speaker Warranty 1 year parts and labor (original purchaser)
Posted on

JL Audio C3 600 Component Speakers – Toyota Camry

JL Audio C3 600 Component Speakers Toyota Camry
JL Audio C3 600 Component Speakers Toyota Camry

JL Audio C3 600 Component Speakers

Toyota Camry JL Audio C3 600 Component Speakers

Installation tips:

To install JL Audio C3 600 Component Speakers into your Toyota Camry, you will want to use tacotunes.com speaker adapters designed to work in your Camry. The JL Audio C2 650 Component Speakers require a 5.1 cutout diameter for the mid range speakers. The JL Audio C3 600 Component tweeters will require a 1.875″ cutout diameter.

Click HERE to check out our audio products for your Toyota Camry

The JL Audio C3 600 Component Speakers will fit you your Toyota Camry without any cutting, drilling or modifying your Camry.

Summary:

Mid range Driver: 5.1″ cutout diameter

Tweeter: 1.875″ cutout diameter

Top Mount Depth:2 1/2″

JL Audio C3 600 Component Speakers Manual Toyota Camry

[TACOFCS]




C3-600

2-Way Convertible Component / Coaxial System: 6-inch (150 mm) Woofer, 1-inch (25 mm) Silk Dome Tweeter
There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application.

The new C3-600 expands the C3 lineup with a direct-fit product for many Japanese vehicles that will not accept a full-size 6.5-inch speaker.

The C3-600 system features 6-inch (150 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-molded polymer baskets. The woofer design benefits from JL Audio’s vast woofer design experience and advanced modeling systems.

The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures.

C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations!

Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo.

Sonic character: Clean and Powerful

Sold as a pair.

Posted on

JL Audio TR650 CSi Component Speakers – Toyota Camry

JL Audio TR650 CSi Component Speaker Manual. Toyota Camry
JL Audio TR650 CSi Component Speaker Manual. Toyota Camry

JL Audio TR650 CSi Component Speakers

Toyota Camry JL Audio TR650 CSi Component Speakers

To install JL AUDIO TR650 CSI COMPONENT SPEAKERS into your Toyota Camry, you will want to use tacotunes.com speaker adapters designed to work in your Camry. The JL Audio TR650 CSi Component SpeakersS require a 5.7 cutout diameter for the mid range speakers. The JL Audio TR650 CSi Component Speakers tweeters will require a 1.58″ cutout diameter.

Click HERE to check out our audio products for your Toyota Camry

The JL Audio TR650 CSi Component Speakers will fit you your Toyota Camry without any cutting, drilling or modifying your Camry.

Summary:

Mid range Driver: 5.7″ cutout diameter

Tweeter: 1.58″ cutout diameter

Top Mount Depth: 2 1/2″

JL Audio TR650 CSi Component Speaker Manual Toyota Camry

[TACOFCS]


TR650-CSi

2-Way Component System: 6.5-inch (165 mm) Woofer, 0.5-inch (12 mm) Textile Balanced Dome Tweeter
The Evolution TR systems have stood the test of time by delivering unsurpassed value and performance in their price class.

The TR-650 system features 6.5-inch (165 mm) component woofers with mineral-filled polypropylene cones, long excursion capabilities and stamped steel frames. The woofer design benefits from JL Audio’s vast woofer design experience and advanced modeling systems.

The 6.5-inch (165 mm) format is a direct fit in many vehicles. Multiple mounting patterns are provided on the woofer frame for easy installation into most vehicles that accept a 6.5-inch (165 mm) speaker.

The TR component tweeters are built with 0.5-inch textile diaphragms that deliver clean response, on and off axis. The tweeters can be flush-mounted or surface-mounted with the supplied fixtures.

An inline 12 dB / octave high-pass filter is pre-wired onto the tweeter connection harness, which connects to the woofer terminals, eliminating a bulky outboard crossover network and simplifying installation.

Woofer grilles are included, each consisting of a black grille tray featuring the JL Audio logo and a black steel mesh grille insert.

Sonic character: Clear and Efficient

Sold as a pair.

Posted on

Focal K2 Power 165KR2 Component Speakers – Toyota Camry

Focal 165KR2 Component Speakers Toyota Camry
Focal 165KR2 Component Speakers Toyota Camry

Focal K2 Power 165KR2 Component Speakers

Toyota Camry Focal K2 Power 165KR2 Component Speakers

To install Focal K2 Power 165KR2 Component Speakers in to yourToyota Camry, you will want to use tacotunes.com speaker adapters designed to work in your Camry. The Focal K2 Power 165KR2 Component Speakers require a 5.7 cutout diameter for the mid range speakers. The Focal K2 Power 165KR2 Component Speakers tweeters will require a 1.83″ cutout diameter.

Click HERE to check out our audio products for your Toyota Camry

The Focal K2 Power 165KR2 Component Speakers will fit you Toyota Camry without any cutting, drilling or modifications to your Camry.

Summary:

Mid range Driver: 5.7″ cutout diameter

Tweeter: 1.83″ cutout diameter

Top Mount Depth: 2 7/8″

Focal K2 Power 165 KR2 Component Speaker Manual Toyota Camry

[TACOFCS]



Camry Focal K2 Power 165KR2 Component Speakers

6.5″ 2-way kit, high precision separate crossover, tweeter level control, midrange control.

specifications

woofer:K2 composite sandwich cone
tweeter:TNK
chassis:Zamac
max power:160W
nominal power:80W
sensitivity:93 dB
frequency response:70Hz – 20kHz
Tools required to for basic speaker installation:If you will be performing a basic installation where you will power the speakers from your head unit, you will need the following tools:
Small slotted head screwdriver1
# 2 Phillips head screwdriver1
10mm socket & ratchet
Tools required for advanced speaker installation:If you will be performing and advanced installation where you will be powering the speakers with a high power amplifier AND running new speaker wire you will need the following tools:1 – wire strippers1 – wire crimpers1 – small zip ties1 – speaker quick disconnectsBe sure to watch our videos. They will answer most of your questions or concerns regarding speaker installation.
Posted on

JL Audio ZR650 Csi Component Speakers – Toyota Camry

JL Audio ZR650 Csi Component Speakers Toyota Camry
JL Audio ZR650 Csi Component Speakers Toyota Camry

JL Audio ZR650 Csi Component Speakers

Toyota Camry JL Audio ZR650 Csi Component Speakers

To install JL Audio ZR650 Csi Component Speakers into your Toyota Camry, you will want to use tacotunes.com speaker adapters designed to work in your Camry. The JL Audio ZR650 Csi Component Speakers require a 5.5” cutout diameter for the mid range speakers. The JL Audio ZR650 Csi Component Speakers tweeters will require a 1.67″ cutout diameter.

Click HERE to check out our audio products for your Toyota Camry

The JL Audio ZR650 Csi Component Speakers will fit you your Toyota Camry without any cutting, drilling or modifying your Camry.

Summary:

Mid range Driver: 5.5″ cutout diameter

Tweeter: 1.67″ cutout diameter

Top Mount Depth: 2 3/4″

JL Audio ZR650 Csi Component Speakers Manual Toyota Camry

[TACOFCS]



ZR650-CSi

2-Way Component System: 6.5-inch (165 mm) Woofer, 1-inch (25 mm) Aluminum Dome Tweeter
Our reference quality ZR component speakers are made for those seeking the highest possible levels of audio performance and are the pinnacle of the JL Audio component speaker lineup.

The ZR650-CSi features 6.5-inch (165 mm) component woofers with Kurt Müller cones and suspensions, precision-machined field plates and die-cast alloy baskets. The woofer design benefits from JL Audio’s vast woofer design experience and advanced modeling systems.

The ZR component tweeters included in this system feature 1-inch aluminum domes with rubber-roll suspensions that damp unwanted ringing while delivering spectacular high-frequency extension. A flush-mounting fixture with a classy electro-formed ring provides a sophisticated touch in any installation.

ZR crossover networks are bi-amp capable and built with super-premium component parts, including U.S.-made Mills™ resistors mounted on an extruded aluminum heat sink, polypropylene capacitors, and segmented air-core inductors. Five levels of tweeter attenuation are provided, as well as four levels of mid-range presence adjustment, for twenty possible voicing combinations!

Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed “ZR” logo.

When nothing but the best will do, choose ZR.

Made in Germany, Sold as a pair.

Sonic character: Accurate and detailed

Posted on

JL Audio C5 650 Component Speakers – Toyota Camry

JL Audio C5 650 Component Speakers Toyota Camry
JL Audio C5 650 Component Speakers Toyota Camry

JL Audio C5 650 Component Speakers

Toyota Camry JL Audio C5 650 Component Speakers

Installation tips:

To install JL Audio C5 650 Component Speakers into your Toyota Camry, you will want to use tacotunes.com speaker adapters designed to work in your Camry. The JL Audio C5 650 Component Speakers require a 5.6” cutout diameter for the mid range speakers. The JL Audio C5 650 Component Speakers tweeters will require a 1.49″ cutout diameter.

Click HERE to check out our audio products for your Toyota Camry

The JL Audio C5 650 Component Speakers will fit you your Toyota Camry without any cutting, drilling or modifying your Camry.

Summary:

Mid range Driver: 5.6 cutout diameter

Tweeter: 1.49″ cutout diameter

Top Mount Depth: 2 5/8″

JL Audio C5 650 Component Speakers Manual Toyota Camry

[TACOFCS]



C5-650

2-Way Component System: 6.5-inch (165 mm) Woofer, 0.75-inch (19 mm) Silk Dome Tweeter
The smoothness and transparency of a high-end silk dome tweeter combines with top-flight component woofer performance to create a loudspeaker system with exceptional refinement and dynamic capability.

The C5-650 component system features 6.5-inch (165 mm) component woofers with die-cast alloy baskets and Kurt Müller cones and suspensions. This woofer benefits from JL Audio’s vast woofer design experience and advanced modeling systems.

The C5 component tweeters are built with 0.75-inch silk dome diaphragms that deliver smooth, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. The flush-mount fixtures feature our RSR (Ratcheting Swivel Rotation) mechanism to allow precise tweeter aiming after installation.

C5 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations!

Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo.

Sonic character: Smooth and balanced

Made in Germany, Sold as a pair.

Posted on

JL Audio C3 650 Component Speakers – Toyota Camry

JL Audio C3 650 Component Speakers Toyota Camry
JL Audio C3 650 Component Speakers Toyota Camry

JL Audio C3 650 Component Speakers

Toyota Camry JL Audio C3 650 Component Speakers

Installation tips:

To install JL Audio C3 650 Component Speakers into your Toyota Camry, you will want to use tacotunes.com speaker adapters designed to work in your Camry. The JL Audio C3 650 Component Speakers require a 5.6” cutout diameter for the mid range speakers. The JL Audio C3 650 Component Speakers tweeters will require a 1.875″ cutout diameter.

Click HERE to check out our audio products for your Toyota Camry

The JL Audio C3 650 Component Speakers will fit you your Toyota Camry without any cutting, drilling or modifying your Camry.

Summary:

Mid range Driver: 5.6″ cutout diameter

Tweeter: 1.875″ cutout diameter

Top Mount Depth: 2 5/8″

JL Audio C3 650 Component Speakers Manual

[TACOFCS]



 

C3-650

2-Way Convertible Component / Coaxial System: 6.5-inch (165 mm) Woofer, 1-inch (25 mm) Silk Dome Tweeter
There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application.

The C3-650 system features 6.5-inch (165 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-molded polymer baskets. The woofer design benefits from JL Audio’s vast woofer design experience and advanced modeling systems.

The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures.

C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations!

Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo.

Sonic character: Clean and Powerful

Sold as a pair.