Posted on

Image Dynamics CTX65CS Component Speakers Tweeters – Toyota FJ Cruiser

Image Dynamics CTX65CS Component Speakers Tweeters

Image Dynamics CTX65CS Component Speakers Tweeters installing in your Toyota FJ Cruiser

Click HERE to check out our audio products for your Toyota FJ Cruiser

Tacotunes.com is Image Dynamics Authorized. Please visit our shopping cart to purchase Image Dynamics CTX65CS Component Speakers Tweeters bundled with the parts you will need to get them installed quickly and easily.

Image Dynamics CTX65CS Toyota FJ Cruiser
Image Dynamics CTX65CS Toyota FJ Cruiser

Image Dynamics CTX65CS Component Speakers Tweeters

Image Dynamics CTX65CS Component Speakers Tweeters: CTX Component Speakers are the affordable solution for the sound enthusiast seeking a high performance speaker system. Their high efficiency provides incredible detail and very high output levels while producing rich well-balanced sound with excellent tonal characteristics. More than the sum of the parts, the CTX components feature a long excursion mid-woofer design that handles high-power amplifiers effortlessly with low distortion allowing higher output levels. The Silk dome CTX tweeters deliver the dynamics and detail without listening fatigue or harshness.The CTX components performance is the product of proper materials and a well executed engineering design. This translates to neodymium magnet silk dome tweeters with swivel mount, mica-polymer composite cones that are stiff, yet light and well-damped butyl rubber surrounds. Crossover with 250 volt metalized polypropylene capacitors air core inductors and 3 position tweeter level control.

Speaker Size: 6.5″

Resistance: 4 OHM Component

Rated Output: 25 -200w

Sensitivity: 89db

Frequency Range: 55Hz – 25kHz

Top Mount Depth: 2.75″

Image Dynamics CTX65CS Component Speaker Manual Toyota FJ Cruiser

Posted on

Hybrid Audio Tech i61-2v2 Component Speakers – Toyota FJ Cruiser

Hybrid Audio Technologies Imagine Component Speakers Toyota FJ Cruiser
Hybrid Audio Technologies Imagine Component Speakers Toyota FJ Cruiser

Hybrid Audio Tech i61-2v2 Component Speakers

Toyota FJ Cruiser Hybrid Audio Tech i61-2v2 Component Speakers

To install Hybrid Audio Tech i61-2v2 Component Speakers into your Toyota FJ Cruiser, you will want to use tacotunes.com speaker adapters designed to work in your FJ Cruiser. The Hybrid Audio Tech i61-2v2 Component Speakers require a 5.6″ cutout diameter for the mid range speakers. The Hybrid Audio Tech i61-2v2 Component Speakers tweeters will require a 2.13″ cutout diameter.

Click HERE to check out our audio products for your Toyota FJ Cruiser

The Hybrid Audio Tech i61-2v2 Component Speakers will fit you your Toyota FJ Cruiser without any cutting, drilling or modifications to your FJ Cruiser.

Summary:

Mid range Driver: 5.6″ cutout diameter

Tweeter: 2.13 cutout diameter

Top Mount Depth: 2.7″

Toyota FJ Cruiser Hybrid Audio Tech Imagine Component Speakers Imagine

 

The Imagine series consist of coaxial/convertible component sets designed for the discerning consumer interested in more than just an ‘OEM replacement speaker.’

The Imagine line-up has quickly become Hybrid Audio’s best-selling speaker, and a favorite amongst dealers and consumers because of its price to performance ratio. Imagine easily outperforms sets costing twice to three times the price. In fact, Imagine was named “one of the top-11 best bargain speakers available” by Car Audio & Electronics Magazine in 2011.

Kits include a pair of cast ABS frame midbass coaxials with water-proof paper cones proprietary to Hybrid Audio Technologies, high-energy ferrite magnets, 25mm soft-dome tweeters, component set conversion items (midbass phase plugs, tweeter cups and hardware, connection wire, and an extra set of magnet decals), integrated high- quality Mylar tweeter crossover capacitors.

Also available, are a range of incredible subwoofers in both the Stage II Imagine series and Stage IV Clarus series, including the I6SW, a 6.5-inch long-throw subwoofer, and the powerful C15SW, a 15-inch low-inductance, low-distortion subwoofer, available in either dual 2 ohm or dual 4 ohm configurations.

 

 

Posted on

Hertz HSK 165 – will they fit in my Toyota Tacoma Double Cab – Toyota FJ Cruiser

Hertz Hi Energy HSK165 Component Speakers.Toyota FJ Cruiser
Hertz Hi Energy HSK165 Component Speakers.Toyota FJ Cruiser

Reply from tacotunes.com:

Click HERE to check out our audio products for your Toyota FJ Cruiser

According to the manual Hertz Hi Energy HSK165 Component Speakers Manual Toyota FJ Cruiser you will need to spec a 5.8 inch coutout for the mid range driver & 1.614 cutout diamter for your tweeters. You can order the tweeters for your FJ Cruiser here @

http://shop.tacotunes.com/FJ Cruiser-Speaker-Installation-Tweeter-Mounts-TACO-TWEET-P.htm

Please be sure to put size above in the order notes.

Customer info removed by request.

1

Tetolon® soft dome tweeter.

2

25mm ø, ferrofluid-cooled mobile voice coil.

3

High energy Neodymium magnet.

4

Rear acoustic chamber.

5

Revolving support and accessories for factory location and flush mounting.

6

Very flexible, high current input cable.

Woofer:

1

Soft iron plates for high heat dissipation, part of the symmetrical magnetic flux motor.

2

Over-sized magnet; provides outstanding energy for maximum control.

3

Pure copper voice coil wound on a KSV former; for excellent thermal and mechanical

capability.

4

Vented bottom plate; improves linearity and thermal dissipation.

5

Damped Mesh Fibre Cone; for extended bandwidth and smooth response.

6

V-cone®; for the best off-axis dispersion and mid-high frequency detail.

7

Anti-vibration rubber magnet cover; damps spurious vibrations.

8

Aerodynamic die-cast aluminium basket; eliminating rear wave reflections.

9

Radial Venting System; for efficient thermal management.

10

Loss-less Polymer Rubber Surround; for long throw and maximum damping

Posted on

Focal Polyglass 170 V Component Speakers – Toyota FJ Cruiser

Focal Polyglass 170 V Component Speakers Toyota FJ Cruiser
Focal Polyglass 170 V Component Speakers Toyota FJ Cruiser

Focal Polyglass 170 V Component Speakers

Toyota FJ Cruiser Focal Polyglass 170 V Component Speakers

To install Focal Polyglass 170 V Component Speakers into your Toyota FJ Cruiser, you will want to use tacotunes.com speaker adapters designed to work in your FJ Cruiser. Focal Polyglass 170 V Component Speakers require a 5.6” cutout diameter for the mid range speakers. The Focal Polyglass 170 V Component Speakers tweeters will require a 1.797″ cutout diameter.

Click HERE to check out our audio products for your Toyota FJ Cruiser

The Focal Polyglass 170 V Component Speakers will fit you your Toyota FJ Cruiser without any cutting, drilling or modifying your FJ Cruiser.

Summary:

Mid range Driver: 5.5″ cutout diameter

Tweeter: 1.797″ cutout diameter

Top Mount Depth: 2 – 1/4″

Focal Polyglass 170 V Component Speakers Manual Toyota FJ Cruiser

[TACOFCS]


Highlights:

  • 6-3/4″ component speaker system (includes 2 woofers, 2 tweeters, 2 crossover networks, and hardware)
  • Polyglass woofer with butyl rubber surround
  • aluminum/magnesium inverted dome tweeter
  • fiberglass/ABS basket
  • outboard crossover
  • grilles included
  • 6-60 watts RMS power range (120 watts peak)
  • frequency response: 60-20,000 Hz
  • sensitivity: 91 dB
  • depth: 2-1/4″

 

2-layer woofer cone and ABS basket The 170 V system features a 6-3/4″ woofer with a Polyglass cone that’s created by depositing a layer of hollow glass microbeads over a layer of cellulose pulp. This unique material combines the warm sound of cellulose with the incredible strength of glass, for a cone that responds rapidly with extremely low resonance. The basket is made from a fiberglass/ABS mixture, providing a non-magnetic, non-resonant housing that won’t color the sound. A butyl rubber surround helps control cone movement and promotes high power handling.

Aluminum/magnesium tweeter Focal designed the aluminum/magnesium inverted dome tweeter to disperse high frequencies evenly for a big, open soundstage. The external 2-way crossover ensures a smooth transition from lows to highs, so vocals and instruments sound natural. Grilles are included.

 

Posted on

Focal Performance PS 165 Component Speakers – Toyota FJ Cruiser

Focal Performance PS 165 Component Speakers Toyota FJ Cruiser
Focal Performance PS 165 Component Speakers Toyota FJ Cruiser

Focal Performance PS 165 Component Speakers

Toyota FJ Cruiser Focal Performance PS 165 Component Speakers

To install Focal Performance PS 165 Component Speakers into your Toyota FJ Cruiser, you will want to use tacotunes.com speaker adapters designed to work in your FJ Cruiser. Focal Performance PS 165 Component Speakers require a 5.6” cutout diameter for the mid range speakers. The Focal Integration 165 VRS Component Speakers tweeters will require a 1.677″ cutout diameter.

Click HERE to check out our audio products for your Toyota FJ Cruiser

The Focal Performance PS 165 Component Speakers will fit you your Toyota FJ Cruiser without any cutting, drilling or modifying your FJ Cruiser.

Summary:

Mid range Driver: 5.6″ cutout diameter

Tweeter: 1.677″ cutout diameter

Top Mount Depth: 2 – 5/8″

Focal Performance PS 165 Component Speaker Manual Toyota FJ Cruiser

[TACOFCS]


 

Highlights:

  • component speaker system includes two 6-3/4″ woofers, 2 tweeters, 2 crossovers, and 2 woofer grilles
  • Polyglass woofer with butyl rubber surround
  • processed aluminum inverted dome tweeter
  • separable crossovers with 3-level tweeter control and 3 tweeter crossover points selector
  • 4-ohm impedance
  • 5-80 watts RMS power range (160 watts peak)
  • frequency response: 60-20,000 Hz
  • sensitivity: 92.5 dB
  • woofer top-mount depth: 2-5/8″
  • warranty: 1 year

 

Posted on

Focal K2 Power 165KR2 Component Speakers – Toyota FJ Cruiser

Focal 165KR2 Component Speakers Toyota FJ Cruiser
Focal 165KR2 Component Speakers Toyota FJ Cruiser

Focal K2 Power 165KR2 Component Speakers

Toyota FJ Cruiser Focal K2 Power 165KR2 Component Speakers

To install Focal K2 Power 165KR2 Component Speakers in to yourToyota FJ Cruiser, you will want to use tacotunes.com speaker adapters designed to work in your FJ Cruiser. The Focal K2 Power 165KR2 Component Speakers require a 5.7 cutout diameter for the mid range speakers. The Focal K2 Power 165KR2 Component Speakers tweeters will require a 1.83″ cutout diameter.

Click HERE to check out our audio products for your Toyota FJ Cruiser

The Focal K2 Power 165KR2 Component Speakers will fit you Toyota FJ Cruiser without any cutting, drilling or modifications to your FJ Cruiser.

Summary:

Mid range Driver: 5.7″ cutout diameter

Tweeter: 1.83″ cutout diameter

Top Mount Depth: 2 7/8″

Focal K2 Power 165 KR2 Component Speaker Manual Toyota FJ Cruiser

[TACOFCS]



FJ Cruiser Focal K2 Power 165KR2 Component Speakers

6.5″ 2-way kit, high precision separate crossover, tweeter level control, midrange control.

specifications

woofer:K2 composite sandwich cone
tweeter:TNK
chassis:Zamac
max power:160W
nominal power:80W
sensitivity:93 dB
frequency response:70Hz – 20kHz
Tools required to for basic speaker installation:If you will be performing a basic installation where you will power the speakers from your head unit, you will need the following tools:
Small slotted head screwdriver1
# 2 Phillips head screwdriver1
10mm socket & ratchet
Tools required for advanced speaker installation:If you will be performing and advanced installation where you will be powering the speakers with a high power amplifier AND running new speaker wire you will need the following tools:1 – wire strippers1 – wire crimpers1 – small zip ties1 – speaker quick disconnectsBe sure to watch our videos. They will answer most of your questions or concerns regarding speaker installation.
Posted on

Focal Integration ISS 690 Component 6×9 Speakers – Toyota FJ Cruiser

Focal Integration ISS 690 Component 6×9 Speakers

Focal Integration ISS 690 Component 6x9 Speakers Toyota FJ Cruiser
Focal Integration ISS 690 Component 6×9 Speakers Toyota FJ Cruiser

Toyota FJ Cruiser Focal Integration ISS 690 Component 6×9 Speakers

To install iFocal Integration ISS 690 Component 6×9 Speakers into your Toyota FJ Cruiser, you will want to use tacotunes.com speaker adapters designed to work in your FJ Cruiser. The Focal Integration ISS 690 Component 6×9 Speakers work with our 6×9 speaker mounts for the mid range speakers. The Focal Integration ISS 690 Component 6×9 Speakers tweeters will require a 1.677″ cutout diameter.

Click HERE to check out our audio products for your Toyota FJ Cruiser

The iFocal Integration ISS 690 Component 6×9 Speakers will fit you your Toyota FJ Cruiser without any cutting, drilling or modifications to your FJ Cruiser.

Summary:

Mid range Driver: use our 6×9 adapters

Tweeter: 1.677″ cutout diameter

Top Mount Depth: 3.07″

 

Focal Integration ISS 690 Component 6×9 Speakers Toyota FJ Cruiser Spec Sheet

Focal Integration ISS 690 Component 6×9 Speakers Toyota FJ Cruiser Technical Data Sheet

Focal Integration ISS 690 Component 6×9 Speakers Toyota FJ Cruiser Technical User Manual


 

ISS 690

2-way component kit

Woofer: 6×9″ (150x230mm)

ADVANTAGES

  • High sensitivity
  • Shallow mounting depth (82.5mm)
  • Partial horn loading tweeter
  • Dynamics and neutrality
  • 2 tweeter support types
  • Tweeter compact size
  • Toyota® car compatibility
Posted on

Focal Integration IS 165 Component Speakers – Toyota FJ Cruiser

Focal Integration IS 165 Component Speaker Toyota FJ Cruiser
Focal Integration IS 165 Component Speaker Toyota FJ Cruiser

Focal Integration IS 165 Component Speakers

Toyota FJ Cruiser Focal Integration IS 165 Component Speakers

To install Focal Integration IS 165 Component Speakers into your Toyota FJ Cruiser, you will want to use tacotunes.com speaker adapters designed to work in your FJ Cruiser. Focal Integration IS 165 Component Speakers require a 5.7” cutout diameter for the mid range speakers. The Focal Integration IS 165 Component Speaker tweeters will require a 1.677″ cutout diameter.

Click HERE to check out our audio products for your Toyota FJ Cruiser

The Focal Integration IS 165 Component Speakers will fit you your Toyota FJ Cruiser without any cutting, drilling or modifying your FJ Cruiser.

Summary:

Mid range Driver: 5.7″ cutout diameter

Tweeter: 1.677″ cutout diameter

Top Mount Depth: 2″

Focal Integration IS 165 Component Speaker Manual Toyota FJ Cruiser

[TACOFCS]


 

Highlights:

  • component speaker system includes two 6-3/4″ woofers, 2 tweeters, 2 crossovers, and 2 woofer grilles
  • Polyglass woofer with butyl rubber surround
  • processed aluminum inverted dome tweeter
  • separable crossovers with 3-level tweeter control and 3 tweeter crossover points selector
  • 4-ohm impedance
  • 5-80 watts RMS power range (160 watts peak)
  • frequency response: 60-20,000 Hz
  • sensitivity: 92.5 dB
  • woofer top-mount depth: 2-5/8″
  • warranty: 1 year

 

Posted on

Focal Integration 165 VRS Component Speakers – Toyota FJ Cruiser

Focal Integration 165 VRS Component Speakers Toyota FJ Cruiser
Focal Integration 165 VRS Component Speakers Toyota FJ Cruiser

Focal Integration 165 VRS Component Speakers

Toyota FJ Cruiser Focal Integration 165 VRS Component Speakers

To install Focal Integration 165 VRS Component Speakers into your Toyota FJ Cruiser, you will want to use tacotunes.com speaker adapters designed to work in your FJ Cruiser. TheFocal Integration 165 VRS Component Speakers require a 5.6” cutout diameter for the mid range speakers. The Focal Integration 165 VRS Component Speakers tweeters will require a 1.83″ cutout diameter.

Click HERE to check out our audio products for your Toyota FJ Cruiser

The Focal Integration 165 VRS Component Speakers will fit you your Toyota FJ Cruiser without any cutting, drilling or modifying your FJ Cruiser.

Summary:

Mid range Driver: 5.6″ cutout diameter

Tweeter: 1.83″ cutout diameter

Top Mount Depth: 2 – 1/4″

Focal Integration 165 VRS Component Speaker Manual Toyota FJ Cruiser

[TACOFCS]


 

Highlights:

  • 6-3/4″ component speaker system (includes 2 woofers, 2 tweeters, 2 crossover networks, and hardware)
  • shallow-mount Polyglass woofer with butyl rubber surround
  • non-resonant zamak (zinc alloy) basket
  • aluminum/magnesium inverted dome tweeter
  • outboard crossover with 3-level tweeter control
  • grilles included
  • 6-60 watts RMS power range (120 watts peak)
  • frequency response: 70-28,000 Hz
  • sensitivity: 93 dB
  • depth: 2-1/4″
  • warranty: 1 year

Integration

You have a car and you enjoy listening to music. We’ve got what you need: the systems of the Integration line. Easy and quick to install, you can even do it yourself, easily replace your original system and these speakers will give you the best Focal sound.

 

Posted on

Focal Access 165A1 SG Component Speakers – Toyota FJ Cruiser

Focal Access 165A1 SG Toyota FJ Cruiser
Focal Access 165A1 SG Toyota FJ Cruiser

Focal Access 165A1 SG Component Speakers

Toyota FJ Cruiser Focal Access 165A1 SG Component Speakers

To install Focal Access 165A1 SG Component Speakers into your Toyota FJ Cruiser, you will want to use tacotunes.com speaker adapters designed to work in your FJ Cruiser. The Focal Access 165A1 SG Component Speakers require a 5.6” cutout diameter for the mid range speakers. The Focal Access 165A1 SG Component Speakers tweeters will require a 1.8″ cutout diameter.

Click HERE to check out our audio products for your Toyota FJ Cruiser

The Focal Access 165A1 SG Component Speakers will fit you your Toyota FJ Cruiser without any cutting, drilling or modifying your FJ Cruiser.

Summary:

Mid range Driver: 5.6″ cutout diameter

Tweeter: 1.8″ cutout diameter

Top Mount Depth: 2 – 9/16″

Focal Access 165A1 SG Component Speaker Manual Toyota FJ Cruiser[TACOFCS]


 

Highlights:

  • component speaker system includes two 6-3/4″ woofers, 2 tweeters, 2 external crossovers, and 2 woofer grilles
  • humidity-resistant, woven glass-fiber woofer in non-resonant ABS/fiberglass basket
  • butyl rubber surround
  • 1″ aluminum inverted dome tweeter
  • external crossover with 3-position tweeter level
  • 4-ohm impedance
  • 6-60 watts RMS power range (120 watts peak)
  • frequency response: 60-20,000 Hz
  • sensitivity: 92 dB
  • mounting depth: 2-9/16″
  • warranty: 1 year

Access SG

Access the Musicality of Focal

Discover the world of Focal sound quality with Access SG, a range that incorporates technology, performance and affordability. The same Focal character and our philosophy of “The Spirit of Sound” is displayed by the extreme attention to detail found at every development stage for the various speakers within the Access SG line. The essential component of these speakers, in terms of quality of reproduction, richness of sound and image detail is the inverted dome aluminum tweeter, whose inclusion represented a unique Focal technology into a more affordable market segment. The subwoofers combine high sensitivity and high power handling. The woven glass fiber cone found on all Access SG line speakers and subwoofers combine the dynamics and precision on mid-range frequencies while offering deep, articulated bass.

TN 44 Tweeter

Aluminum inverted dome tweeter technology offers significant rigidity and lowers distortion. The main advantage of the inverted dome shape is ideal air coupling due to its inverted shape, which allows a very wide soundstage and very accurate image unlike a traditional raised dome, which produces a weak coil/dome energy transfer.

All Weather Woven Glass Fiber Cone

The Access SG speakers and subwoofers are built with a light and stiff cone coupled with a butyl rubber surround, that offer a degree of quality never before encountered at this price level. This special all weather cone, will perform in hot and humid environments without distortion or warping. The subwoofer’s power handling and reliability are remarkable thanks to deliberately oversized voice coils, resulting in deep and accurate bass.

Crossover

The Access SG crossovers found in all Access SG Component systems fully reflect Focal’s philosophy, which is oriented towards in-car application and uncompromising quality requirements. Polypropylene capacitors bring to the Components high fidelity and distortion free dynamics. Level control on the crossover allows further refinement of the tuning of the tweeter in any mounting location.

Posted on

Clarion SQR 1722 Component Speakers – FJ Cruiser

Clarion SQR 1722 Component Speakers Toyota FJ Cruiser Picture
Clarion SQR 1722 Component Speakers Toyota FJ Cruiser Picture

Clarion SQR 1722 Component Speakers

Toyota FJ Cruiser Clarion SQR 1722 Component Speakers

To install Clarion SQR 1722 Component Speakers into your Toyota FJ Cruiser, you will want to use tacotunes.com speaker adapters designed to work in your FJ Cruiser. The Clarion SQR 1722 Component Speakers require a 5.6” cutout diameter for the mid range speakers. The Clarion SQR 1722 Component Speakers tweeters will require a 1.8125″ cutout diameter.

Click HERE to check out our audio products for your Toyota FJ Cruiser

The Clarion SQR 1722 Component Speakers will fit you your Toyota FJ Cruiser without any cutting, drilling or modifying your FJ Cruiser.

Summary:

Mid range Driver: 5.6″ cutout diameter

Tweeter: 1.8125″ cutout diameter

Top Mount Depth: 2 – 7/16″

Clarion SQR 1722 Component Speakers Toyota FJ Cruiser
Clarion SQR 1722 Component Speakers Toyota FJ Cruiser

[TACOFCS]


 

SPECIFICATIONS

    • 6-3/4″ AMI-PP Cone Woofer

    • 3/4″ Pure Soft Dome Tweeter with Neodymium Magnet

    • Phase Plug

    • 2-Way Mounting Tweeter (Variable Angle / Surface Mounting)

    • Powerful Strontium Magnet for Dynamic Bass Response

    • Grille & Mesh Included

    • GM/CHRYSLER Adaptor Included

  • In-Line -12dB/oct Crossover Network
  • 55 Watts RMS
  • package includes two 6-3/4″ woofers and two tweeters
  • aramid and mica injected polypropylene woofer with rubber surround
  • 3/4″ soft dome tweeter
  • in-line crossover network
  • power range: 5-55 watts RMS (400 watts peak power)
  • frequency response: 28-35,000 Hz
  • sensitivity: 91 dB
  • woofer top-mount depth: 2-7/16″
  • warranty: 1 year
0
Efficiency (dB/W/m) 91
Freqency Response (Hz) 28~35k
Mounting Depth (Inch) 2-7/16