Posted on

Will Rockford Fosgate T1692 Rockford T165 fit Toyota Camry

Will Rockford Fosgate T1692 Rockford T165 fit Toyota Camry


According to the specs below (taken from RF website), those 6x9s are WAY to deep to fit in your Camry’s front doors. We don’t recommend going over 3.15″ top mount depth. The Rockford T165 will work fine in the read door of your Toyota Camry.


While it is possible to use more spacers to gain additional top mount depth you will be faced with a second problem. The speakers will get to close or touch the door panel. This will damage the speakers. Per our speaker guidelines for a Camry you should look for speakers that are below3″ top mount depth. Have you considered our Image Dynamics CTX6x9 bundle? WE have a lot of happy Camry owners with this setup.

Click HERE to check out our audio products for your Toyota Camry

Check us out at:

Friend us on Facebook:



Add us a friend on Facebook:


Follow Us on Twitter:





—–Original Message—–
From: [email protected] []
Sent: Friday, June 28, 2013 8:30 AM
To: [email protected]
Subject: Contact Us Requested


You have received a contact request from a visitor to your storefront at

E-mail Address:

Name: Leonard


Phone Number:



I have a 2011 Camry crewmax and I’m putting in Rockford Fosgate T1692, 6×9 in the front and Rockford T165, 6.5 in the rear. What kit would I need for all four speakers?


Thank you,

The Quick Shopping Cart Team


Get Power series sound quality in a drop-in speaker. These full-range speakers inherent all the coolest features from their big brother component systems. Be prepared, these are more than OEM replacement speakers, their sound quality has been perfected for true Rockford Fosgate fanatics!

Rockford Fosgate T165 Toyota Camry
Rockford Fosgate T165 Toyota Camry
Rockford Fosgate T1692 Toyota Camry
Rockford Fosgate T1692 Toyota Camry

CEA-2031 Compliant: CEA-2031 Guidelines
Configuration: 2-Way Full-Range
Midrange Diameter (in): 6″x9″
Midrange Depth (in): 3.43″ (87mm)
Tweeter Diameter (in): 1.0″ (25.4mm)
Tweeter Depth (in):
Frequency Response: 50Hz – 22kHz
Nominal Impedance: 4-Ohm
Power Handling (RMS): 100 Watts RMS 200 Watts MAX
Crossover: Built-in tweeter crossover High-Pass (HP): 12dB/octave Butterworth
Sensitivity (dB @ 1 watt/1 meter): 90dB
Grilles Included: Yes
Mounting Hardware: No
Shipping Weight: 12.6 Lbs. (5.72 Kg.)