Kicker 40CSS674 Component Speakers
Toyota FJ Cruiser Kicker 40CSS674 Component Speakers
To install Kicker 40CSS674 Component Speakers into your Toyota FJ Cruiser, you will want to use tacotunes.com speaker adapters designed to work in your FJ Cruiser. The Kicker 40CSS674 Component Speakers Speakers require a 5.6″ cutout diameter for the mid range speakers. The Kicker 40CSS674 tweeters will require a 1.577″ cutout diameter.
Click HERE to check out our audio products for your Toyota FJ Cruiser
The Kicker RS652 Component Speakers will fit you your Toyota FJ Cruiser without any cutting, drilling or modifications to your FJ Cruiser.
Summary:
Mid range Driver: 5.6″ cutout diameter
Tweeter: 1.577″ cutout diameter
Top Mount Depth: 2.1 ″
Kicker RS652 Component Speakers Toyota FJ Cruiser
Ultimate reliability and tremendous audio clarity provide the makeup for RS-Series Matched Component Systems.
These outstanding midrange/tweeter/crossover combos use most all of the technologies of supreme QS-Series Systems, giving music lovers yet another source for a complete range of the smoothest, richest frequencies available. The RS-Series offers a more affordable option for those who seek genuine KICKER high-end performance from their mobile-audio system.
The RS65.2 (featuring a 6.5-inch midrange woofer) and RS60.2 (a true 6-inch midrange that also fits 5.25-inch location) let their primary sound flow through speakers that use a polyimide former and copper-clad aluminum wire to help decrease hot temperatures within the motor. Cast-aluminum baskets with nickel-plated, spring-loaded terminals provide additional protection and result in a more durable driver and higher power handling.
Each system’s one-inch, high-end tweeter pair with advanced DuPont® Tetoron® elliptical domes can be installed in a flush, angled, surface, or coaxial mount, the latter allowing the installer to remove aluminum phase plugs from the midrange speakers’ centers and screw in special adapters and tweeters. RS-Series tweeters exude a wider dispersion pattern for greatly increased detail in high frequencies.
Redesigned crossovers make RS Component Systems more flexible and reliable than ever, and they look great in a custom install. Configuration choice rests with the listener – the new 2-way bi-ampable passive crossovers have 18 dB/ octave highpass and 12 dB/ octave lowpass filters at 3.5kHz to optimize output. A tweeter output-level switch (0dB, +3dB, +6dB) determines tweeter volume, while the crossover itself provides incandescent tweeter protection
| Model | RS65.2 |
| Woofer (in., cm) | 6-1/2, 16.5 |
| Tweeter (in., cm) | 1, 2.5 |
| Max Rec Amp Power (WATTS PEAK/RMS)* | 200/100 |
| Sensitivity (dB 1w/1m) | 87 |
| Frequency Response (Hz) | 40-21k |
| Mounting Hole Diameter (in.,cm) | 5-7/16, 13.8 |
| Woofer Mounting Depth (in., cm) | 2-7/16, 6.2 |
| Crossover Point (Hz) | 3.5k |
| Crossover Slope (dB octave) | 18 hi/12 lo |
| Tweeter Attenuation (1.5dB steps) | 0/+3/+6 |
| Model | RS60.2 |
| Woofer (in., cm) | 6, 16 |
| Tweeter (in., cm) | 1, 2.5 |
| Max Rec Amp Power (WATTS PEAK/RMS)* | 180/90 |
| Sensitivity (dB 1w/1m) | 87 |
| Frequency Response (Hz) | 50-21k |
| Mounting Hole Diameter (in.,cm) | 5, 12.7 |
| Woofer Mounting Depth (in., cm) | 2-5/16, 5.8 |
| Crossover Point (Hz) | 3.5k |
| Crossover Slope (dB octave) | 18 hi/12 lo |
| Tweeter Attenuation (1.5dB steps) | 0/+3/+6 |
*Assumes typical music program with minimal clipping; varies with enclosure size. See your KICKER dealer for details.
Due to continual developement, product, and specifications are subject to change without notice. Stillwater Designs and it’s agents are not responsible for typographical errors.