Description
This plug-and-play 12v Constant and Remote Turn on harness is your solution providing a 12v constant or Remote Turn on signal to aftermarket accessories in the 2022+ Base Audio (Non-Jbl) Tundra’s.
Say goodbye to the frustration of cutting and splicing into your factory harness with this EASY plug and play 12v and remote turn on solution that installs behind the factory head unit.
Be sure to check out our other Plug & Play harnesses designed for your Tundra audio system. They will make installing new aftermarket speakers – FAST & EASY with ZERO cutting or splicing of factory wires.
The 12v Constant and/or remote turn on signal is usually required in the case of adding an aftermarket amplifier that does NOT support high level input. These signals are also usually required in the installation of a line out converter (LOC) or Digital Sound Processors (DSP). This harness provides both the 12v constant and Remote turn on signal needed for those installations.
While most audio systems can always benefit from the use of an LOC, it is HIGHLY recommended to use a Line Out Converter such as tacotunes.com NTUNE6 or Audio Control Lc5i Pro when installing Complete aftermarket audio systems in the 2020+ Tundra’s that are equipped with apple car play.
(line out converter recommendations are provided at the bottom of this description)
Option A: 17 foot harness (1 Harness Included)
(Harness 3 in tacotunes installation diagram examples)
This harness is setup to provide a 12V constant power to your LOC/Sound Processor. It also includes Accessory Wire that will turn your aftermarket audio gear on / off.
17 Foot prewired leads prevent you from having to cut or splice ANY wires to obtain the 12 volt constant and remote turn on harness signals needed for aftermarket amplifiers, line out converters (LOC), Digital Sound Processors (DSP) and more in the 2022+ Base Audio (non-jbl) equipped toyota tundras!
Line Out Converter:
Option A: Tacotunes.com – Ntune6
The NTUNE6 is designed to keep your stock stereo and add aftermarket amplifiers(s) to your Toyota Tundra. When Toyota added Android Auto & Apple Carplay to your Tundra, the bass and audio signal coming from the stock stereo was significantly reduced. This created many problems with bass output and speaker level output. See the video for a detailed explanation of the NTUNE6’s features designed for your Tundra.
Included with Tacotunes Ntune6 Line Out Converter:
1 – NTUNE6
3 – RCA to TXD Amplifier Cables (TXD Series Amplifiers Only)
1 – Blue Remote Turn On Wire
1 – Ground Wire
Audio Control LC5i Pro
Included with Tacotunes LC5i Pro Line Out Converter:
1 – LC5i Pro
1– Subwoofer Control Knob
2022+ Toyota Tundra – How to add 4 channel & subwoofer amplifiers using an Audio Control LC5i Pro.
2022+ Toyota Tundra – How to add tacotunes TXD 4 channel & subwoofer amplifiers using an LC5i Pro.
2022+ Toyota Tundra – How to add 4 channel & subwoofer amplifiers using tacotunes NTUNE6.
2022+ Toyota Tundra – How to add tacotunes TXD 4 channel & subwoofer amplifiers using NTUNE6.
Wiring Schematic:
Red Wire – Remote Turn on wire
Yellow Wire – Constant 12v (Do not use to power amps! this is for sound processors ONLY)
PRODUCT TERMS:
This harness will provide 4 output channels (FL, RF, RL, RR) from my stock head unit. I understand that I will need to supply an LOC/DSP/Sound Processor that will properly output the desired 4, 5, or 6 channel low-level output that is required to provide the signal for my amplifiers.
I understand that not all LOC/DSP/Sound Processors may not work properly with my stock head unit (Radio).
I understand this product is NON REFUNDABLE if the product packaging is “opened”. NO EXCEPTIONS.
I understand that support for this product is limited to ensuring signal delivery to your LOC/DSP/Sound Processor. We are unable to provide support for LOC/DSP/Sound Processors/Amplifiers purchased from other vendors.
NOTE: We suggest using NTUNE6 or a similar product designed to work with your Toyota Stock Stereo. Keep in mind
