Description
“System 2” Complete Audio System Upgrade Designed for 2010-2019 Toyota 4Runner
Our “System 2” audio system designed for your Toyota 4Runner contains all components necessary for a successful installation. This setup will work with stock or aftermarket head units. This is for NON-JBL equipped 4Runners. If your 4Runner is factory JBL equipped, please be sure to contact us before placing your order.
This system includes our TXD3204v3 4 channel amplifier that will boost your new front door component speakers. It also includes our TXD1000.1 subwoofer amplifier that will power your new full size 12″ subwoofer. . . thus dramatically enhancing your stock stereo’s performance. In addition, the amp has plenty of power when you decide to upgrade your rear door/hatch speakers. We will show you how to tune your amplifier to match your speaker’s capabilities. Many of our customers build their audio as their budget allows.
TXD3204v3 – 4 Channel Amplifier Install Kit (included)
TX3204v3 / Install Kit Specs (more info)
Front & Rear Speaker Output
100 watts x 4 (Front/Rear Door Speakers) RMS (4 Ohm)
The following items are included with the TXD800.5 Install Kit
1- Direct Connect 4Runner Plug N Play Integration System
NOTE: This setup is designed to work with your stock stereo. However, it will work with aftermarket head units as well.
1 – TXD Tundra direct replacement amp rack – bolts directly to stock mounting location. No cutting or drilling.
TXD10001 – Subwoofer Amplifier Install Kit (included)
TXD10001 / Install Kit Specs (more info)
Subwoofer Output
1000 watts x 1 Subwoofer Output (1 Ohm)
The following items are included with the TXD800.5 Install Kit
1 – TXD1001- Subwoofer Control Knob
1- Direct Connect Tundra Plug N Play Integration System
NOTE: This setup is designed to work with your stock stereo. However, it will work with aftermarket head units as well.
Amp Power Installation Kit (included)
TXDAMPKIT-01 Amp Power Install Kit
1 – tacotunes.com MANL Fuse Holder
1 – tacotunes.com 4 gauge to 8 gauge distribution block
1 – 2.5ft 4 gauge tacotunes.com OFC – battery connection with terminal ring attached (red)
1 – 13ft 4 gauge tacotunes.com OFC – amplifier power wire (red)
2 – 10in 8 gauge tacotunes.com OFC – amp power wire (red)
2 – 24in 8 gauge tacotunes.com OFC – amplifier ground wire with ring terminals attached (black)
1 – 100 AMP (BLUE) MANL Fuse (battery)
1 – 60 AMP (YELLOW) MANL Fuse (TXD10001 Amp)
1 – 40 AMP (ORANGE) MANL Fuse (TXD6001 Amp)
1 – 30 AMP (RED) MANL Fuse (TXD3204v2 Amp)
1 – 10mm grounding bolt
1 – 5/16″ self tapping grounding bolt
20 – cable ties
1 – 6ft 1/2″ split loom
1 – 3ft 1/4″ split loom
2 – #8 x 5/8 Black Screw
4Runner Full Size 12″ Ported Subwoofer Enclosure & Subwoofer (included)
4Runner 12 inch Subwoofer Specs (more info)
1 – tacotunes.com ported fiberglass subwoofer enclosure
1 – Image Dynamics IDQ12D4 (800 watts RMS) dual voice coil 12″ subwoofer (1 Ohm presented to amp for max power)
1 – Terminal Cup & Internal Wiring
1 – 20 foot 12G subwoofer wire
NOTE: Color & Finish may vary slightly on the subwoofer box.
The subwoofer enclosure does NOT fit 3rd row seating.If your 4Runner is equipped with a rear cargo sliding tray, those will not be available for at least 90 days.
Front Door Speakers: (Included in System 1)
Speakers (more info)
2 -Tacotunes TT65CS 6.75″ Component Speakers, Tweeters & Crossovers
2 – Front Door Speaker Mounts
2 – tacotunes dash speaker adapters (tweeters)
2 – 36″ Wire Harness Adapters (connects to stock wiring)
2 – 36″ 16G speaker wire – Red / Black (mid range)
2 – 36″ 18G tweeter wire – Red / Black (tweeter)
Rated at 100 watts (RMS)
NOTE: These are tacotunes.com branded speakers.
Rear Door / Hatchback Speakers: (optional)
Speakers (more info)
4 – tacotunes direct replacement speakers.
Rated at 80 watts (RMS)
What others are saying
There are no contributions yet.