Toyota FJ Cruiser Front Door Kicker KS 6.75″ Component Speaker Installation Kit
This kit includes discounted pricing on the following items needed to install the Kicker KS 6.75 Component speakers in the front doors of your Toyota FJ Cruiser:
Component or Coax Compatibility
The woofer’s bullet-phase plugs come out and special adaptors and tweeters screw in for a speedy solution to coaxial sound.
All woofers have a reduced mounting depth to avoid internal door obstructions and fit most factory cutouts.
Stiff polypropylene cones and tough rubber surrounds provide durable midrange and bass so you can keep Livin’ Loud for many years to come.
The soft, silk dome, 25mm tweeters use lightweight neodymium magnets for precise high frequencies and overall smooth, natural sound.
This kit includes:
2 – Kicker KS67 Component Speakers
2 – Kicker KS67 Component Tweeters
2 – Kicker KS 67 Crossovers
2 – Front Door 6.5″ speaker mounts (Driver & Passenger Side) – this is a pair of speaker mounts.
2 – tweeter mounts – custom sized.
8 – Mounting Bolts
8 – Mounting Screws
Speaker Wire Harness Kit
If you are planning to power your speakers with the stock wiring (using the stereo to power the speakers), you will want to add the speaker wire harness adapter kit to your order. This kit will allow you to plug into the the factory wiring without any cutting of splicing AND will make it much easier to return your Toyota FJ Cruiser back to factory if you ever trade in or sell. If you are planning to install an amplifier, you will be running heavier gauge speaker wire to your speakers so you will NOT need wire harnesses.
Thank you for taking the time to check out our products for your Toyota FJ Cruiser. We sincerely appreciate the opportunity to do business with you!
|Woofer [in, mm]|
|Rated Impedance [Ω]|
|Peak Power Handling [Watts]|
|Continuous Power Handling [Watts RMS]|
|Sensitivity [1W, 1m]|
|Frequency Response [Hz]|
|Woofer Mounting Hole Diameter [in, mm]|
|Woofer Bottom Mount Depth [in, mm]|
|Flush Mount Tweeter Hole Diameter [in,mm]|
|Flush Mount Tweeter Depth [in,mm]|
|High Pass [dB], at Frequency [Hz]|
|Low Pass [dB], at Frequency [Hz]|
|High Frequency Output Attenuation [dB]|
|0, 4.5, 9|
*Power handling assumes typical music program with minimal clipping. See your KICKER dealer for complete details. Based on measurements of 4Ω models.
NOTE: The included crossover MUST be used in the installation. Failure to use the crossover will result in speaker damage that is not covered under warranty. We have powered these speaker in show vehicles with 140 watts for over 7 hours of continuous play time. These are amazingly loud and clear. Be sure your amp is providing CLEAN power.
Manufacturer’s Warranty: 1 year.
How to install speakers in your Toyota FJ Cruiser: