Description
Plug and Remote Turn On/ 12v Constant Harness
This plug and play harness makes connecting to the 12v constant in your stock system fast and easy. No need to cut or splice your factor speaker wiring. Simply insert the plug behind the head unit (stereo) run the 19 foot leads to your amplifier or line out converter and you are ready to use your factory voltage. Be sure to check out our plug and play amps for your Toyota Tacoma. They quickly take your stock system from 18 watts to 70 watts RMS to each speaker. In addition, our subwoofer amplifier will power your subs between 600 & 1000 watts RMS.
NOTE: Our plug and play amplifiers do not require a remote “turn-on” wire. Be sure to check that your amp or powered sub does not require the additional remote wire harness.
| WIRE COLOR | WIRE FUNCTION |
|---|---|
| Yellow | 12V Constant / Memory |
| Red | Switch / Accessory |
| Black | Ground |
| Blue | Antenna Remote |
| Blue with White Stripe | Amplifier Remote Turn-on |
| Orange with White Stripe | Dash Light Dimmer/Illumination |
| Green | Left Rear Speaker (+) |
| Green with Black Stripe | Left Rear Speaker (-) |
| White | Left Front Speaker (+) |
| White with Black Stripe | Left Front Speaker (-) |
| Purple | Right Rear Speaker (+) |
| Purple with Black Stripe | Right Rear Speaker (-) |
| Gray | Right Front Speaker (+) |
| Gray with Black Stripe | Right Front Speaker (-) |
What others are saying
There are no contributions yet.