Description
THIS HARNESS SYSTEM IS NOT EQUIPPED WITH A SEPERATE SUBWOOFER INPUT!
NOTE: If you are planning to add a 4-channel amplifier & subwoofer, consider purchasing our NTUNE6. The NTUNE6 will correct the audio output frequency & provide you with Front, Rear and Subwooofer outputs.
WE ARE NOT RESPONSIBLE IF LOCS/AMPS/SOUND PROCESSORS/ETC PURCHASED ELSEWHERE DO NOT WORK WITH THIS HARNESS SYSTEM. ENSURE THAT YOUR PRODUCT WILL CREATE THE OUTPUT SIGNAL REQUIRED FROM THE FRONT & REAR INPUTS. THIS HARNESS WILL OUTPUT FRONT & REAR SIGNAL (4 CHANNELS).
CONSIDER USING OUR PRODUCTS (NUNTE6/ TXD AMPS) DESIGNED TO WORK WITH THIS HARNESS AND YOUR TOYOTA.
WE DO NOT OFFER RETURNS IF THIS PRODUCT HAS BEEN OPENED/USED. !!NO EXCEPTIONS!!
2018+ Camry PNP Direct Integration System Amplifier Interface Adapter
This is the same harness we use with our plug and play amplifier system (2018+) . The harnesses connect directly to your stock input / output wires in your Toyota Camry.
Features:
13 Ft leads.
18 gauge signal wire
16 gauge speaker wire
Industry Standard 12V Color Coded input / output Molex connectors (for plug and play system)
Easily modified to work with other amplifiers.
Optional – Remote Turn On / 12V Constant Wires
Constant 12V if a relay is required for your amp(s) or use with sound processor.
NOTE: This harness system was manufactured to work with tacotunes.com plug and play amplifiers. You can cut off the blue/black Molex plugs and connect them to a number of different brand amplifiers. However, due to the large number of amp brands / models we cannot help with the installation process. To make the installation easier, we have listed the color/purpose of each wire in the harness system.
DOES NOT SUPPORT FACTORY INSTALLED JBL AUDIO SYSTEMS!
IMPORTANT: The factory wiring was not designed to handle a lot of power. We do not recommend more than 100 watts (RMS) on your stock wiring. Most amps are rated at 14.4 volts for their ratings. Toyota charging system is only 13.6. So you can use an amp rated at 100 watts RMS. Not all amps are equipped to handle high level inputs. So your amp might require a sound processor or line converter or sound processor.
WE DO NOT OFFER SUPPORT FOR THIS ITEM. IF YOU ARE NOT SURE HOW TO USE CONSULT A PROFESSIONAL INSTALLER.
Wiring Schematic:
BLACK PLUGS (Output to stock speakers):
Green – Left Rear Speaker (+)
Green with Black Stripe – Left Rear Speaker (-)
White – Left Front Speaker (+)
White with Black Stripe – Left Front Speaker (-)
Purple – Right Rear Speaker (+)
Purple with Black Stripe Right – Rear Speaker (-)
Gray – Right Front Speaker (+)
Gray with Black Stripe – Right Front Speaker (-)
BLUE PLUGS / END CUT (Input from stock stereo):
Green – Left Rear Speaker (+)
Green with Black Stripe – Left Rear Speaker (-)
White – Left Front Speaker (+)
White with Black Stripe – Left Front Speaker (-)
Purple – Right Rear Speaker (+)
Purple with Black Stripe Right – Rear Speaker (-)
Gray – Right Front Speaker (+)
Gray with Black Stripe – Right Front Speaker (-)
OTHER:
Red Wire – Remote Turn on wire
Yellow Wire – Constant 12v (Do not use to power amps!, this is for sound processors ONLY)
