Alpine SPR 60C Component 2 Way Speaker System
Toyota Tacoma Alpine SPR 60C Component 2 Way Speaker System
To install Alpine SPR 60C Component 2 Way Speaker System into your Toyota Tacoma, you will want to use tacotunes.com speaker adapters designed to work in your Tacoma. The Alpine SPR 60C Component 2 Way Speaker System require a 5.4” cutout diameter for the mid range speakers. The Alpine SPR 60C Component 2 Way Speaker System tweeters will require a 2.0″ cutout diameter.
The Alpine SPR 60C Component 2 Way Speaker System will fit you your Toyota Tacoma without any cutting, drilling or modifying your Tacoma.
Summary:
Mid range Driver: 5.4″ cutout diameter
Tweeter: 2.0″ cutout diameter
Top Mount Depth: 2 3/8″
Alpine-SPR-60C-Component-Speakers Manual
These speakers have been test fit to work in the front doors Toyota Tacoma 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014
Overview
Specification
Features and Specification
SPECIFICATIONS
Power Handling
CEA-2031 Power Rating: 110 Watts
Power Handling Capacity (RMS): 110 Watts
Power Handling Capacity (Peak): 330 Watts
Dimensions
Tweeter Mounting Diameter (mm): 37.9mm
Tweeter Mounting Diameter (in): 1-1/2”
Tweeter Mounting Depth (mm): 19 mm
Tweeter Mounting Depth (in): 3/4”
Woofer Diameter (mm): 165mm
Woofer Diameter (in): 6-1/2”
Woofer Mounting Diameter (mm): 136mm
Woofer Mounting Diameter (in): 5-3/8”
Woofer Mounting Depth (mm): 59mm
Woofer Mounting Depth (in): 2-3/8”
Crossover Size (mm): 63mm x 32mm x 24mm
Crossover Size (in): 2-1/2” x 1-1/4” x 15/16”
General
Frequency Response: 65Hz – 29kHz
Impedence: 4 Ohms
Sensitivity: 88dB (1W/1m)
FEATURES
Tweeter
Tweeter Type: 1” (2.5cm) Ring Radiator Tweeter
Voice Coil Type: Large Aluminum Voice Coil/Copper Square Wire
Magnet Material: Neodymium Magnet
Swivel Application: Swivel Application
Application Type: Flush Mount, Surface Mount
Woofer
Cone Material: Hybrid Multi Layer Cone
Motor Technology: Linear Drive Technology
Surround: HAMR Surround
Voice Coil Type: Large Aluminum Voice Coil
Voice Coil Wire: Copper Square Wire
Magnet: Ultra High Density Neodymium Magnet
DX Ring: DX Ring
Wave Guide: Wave Guide
Mounting: Shallow Mounting Design
Mounting Adapters: Mounting Adapter Kit Included
Design: Bi-Amp Ready Design
Crossover Network
Design: In-line Network Design
Attenuation Control: 4 Step (0, -2, -4, -6 dB)
High Grade Network Components: High Grade Network Components
Others: Pure Copper Trace-Style Resistance Circuit Board
