2024 Toyota Tundra CrewMax System 1B: Major Audio Upgrade With NTUNE6 Integration
A HUGE thank you to Mark for making the trip to our shop!
Vehicle
2024 Toyota Tundra CrewMax
System
System 1B
Posted
November 2024
Shop
Taco Tunes, San Antonio, TX
Mark was very disappointed with the audio system in his 2024 Crew max. So.. We got him set up with our system 1B!
He was SHOCKED by the MAJOR upgrade in his Tundra’s audio!
The system 1B that includes the following
2022+ Tundra Factory Integration System: 3 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.; NTUNE6 – LOC / Audio leveler & Bass Enhancement module
Front Door Component Speakers: Tacotunes.com TT65CS Component Speakers; Tacotunes.com Budget Friendly Front Door speaker mounts; TT65 Mid bass Drivers -100 Watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com Dash Speaker Wire Harness Adapters; Tweeters Installed in dash location using tweeter adapters.
Rear Door Components: Tacotunes.com TT65CS Component Speakers; Tacotunes.com Budget Friendly speaker mounts cut to 5.6”; TT65 Mid bass drivers Handles -100 watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Tweeter Harness Adapters; Tweeters will fit in stock door location
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD1000.1 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; TacoTunes TT10 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!
Install photos
Our Tacotunes.com dual 10” subwoofer box fits like a glove behind your rear seat! Don’t give up your under-seat storage when you can keep it AND enjoy your music!Laser Cut / CNC Bent Amp Rack. Bolts behind your rear seat on your passenger side with a stock mounting location. Don’t let audio shops drill holes in your new Tundra! Tacotunes.com TXD1001 Subwoofer amp and TXD3204v 4 channel amp, mounted to rear wall using stock mounting location (bolts).The NTUNE6 is designed to keep your stock stereo and add aftermarket amplifiers(s) to your Toyota Tundra. When Toyota added Android Auto & Apple Car play to your Tundra, the bass and audio signal coming from the stock stereo was significantly reduced. This created many problems with bass output and speaker level output.Here is a before & after frequency response (graph) with our NTUNE 6 installed – in this 2022 Toyota Tundra. The frequency response was recorded using a LINE LEVEL RTA (not a microphone RTA). The before picture shows the roll of coming from the stock audio system. The AFTER picture shows the frequency response after we installed the NTUNE6.Tacotunes.com TT65cs Front Door Component Speakers. Designed to work with your dash tweeter, you can see the crossover network on the floor that will be hidden under the front kick panel. A true component setup in your Tundra. Don’t settle for OEM style or low-end coaxial speakers!Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersHere can see the crossover network on the floor that will be hidden under the front kick panel. A true component setup in your Tundra. Don’t settle for OEM style or low-end coaxial speakers!Direct tundra integration… Keep your stock head unit and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Keep under your hood clean from those loose single fuses with our Laser Cut / CNC Bent Fuse Holder Bracket! Makes adding aftermarket electrical upgrades MUCH easier AND organized!
Frequently asked questions
What does the NTUNE6 do in a Tundra?
The NTUNE6 is a line output converter, audio leveler and bass enhancement module. It lets you keep your stock stereo and add aftermarket amplifiers while flattening the factory signal.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.