We want to send a massive thank you to Kenneth for coming out to our shop! Kenneth was tired of the factory JBL audio system in his new 2026 Tundra, so we set him up with our complete JBL Tundra Audio System 1B with full sound deadener matting.
Vehicle
2026 Toyota Tundra JBL
System
System 1B
Posted
August 2026
Shop
Taco Tunes, San Antonio, TX
Kenneth’s build ran a two-amp setup: a dedicated four-channel amp for the doors and a separate mono amp just for the dual 10″ subwoofers.
How the JBL integration keeps your Tundra factory-safe
Our 100% plug-and-play solution gives a factory-grade fit with zero modifications to your OEM harnesses. It captures a clean, unmodified signal before it reaches the factory amp, so the new amplifiers get a consistently flat, high-quality signal. You get crystal-clear highs, well-defined mids and powerful bass without a single cut wire.
The 2022+ Tundra JBL System 1B includes
2022+ JBL Tundra Factory Integration System: 2-harness plug-and-play system, no cutting or splicing factory wires
Front doors: Tacotunes.com TT65CS component speakers: TT65 mid-bass drivers (100 watts RMS), TT65 crossovers, TT65 tweeters in clip-in mounts at the factory A-pillar location, heavy-duty speaker mounts cut to 5.6″, front door harness adapters
Rear doors: TT65CS rear components: TT65 mid-bass drivers (100 watts RMS), TT65 crossover on a heavy-duty rear door crossover mount, TT65 tweeters in clip-in mounts at the factory door location, tweeter harness adapters
Amplification: tacotunes.com TXD3204v3 4-channel amplifier and TXD1000.1v2 mono amplifier: 100 watts x 4 to the door speakers and 800 watts x 1 to the subwoofers
Amp rack: laser-cut rack that bolts to the factory mounting location, no holes drilled in your floor
Subwoofers: Tacotunes Dual 10 HYBRID subwoofer enclosure with two TacoTunes TT10V4 full-size 10″ subwoofers (400 watts RMS each, 800 total)
Keep an eye out for our under-seat fiberglass subwoofer boxes for the Tundra, designed for serious bass lovers, with tons of air space and mounting depth.
Install photos
Frequently asked questions
What is the difference between a one-amp and two-amp System 1B?
Some builds use a single five-channel amplifier for doors and subs. Kenneth’s used a TXD3204v3 four-channel amp for the doors and a TXD1000.1v2 mono amp for the subwoofers. Both plug into the same JBL integration system.
Do you have to cut factory wires to upgrade the audio in a 2026 Tundra?
No. Taco Tunes systems for the 2026 Tundra use custom plug-and-play harnesses that connect to the factory plugs, so there is no cutting or splicing. The upgrade is fully reversible if you ever want to go back to stock.
Can I install this in my 2022+ Tundra myself?
Yes. Taco Tunes products are designed for DIY installs: they bolt to factory mounting points and plug into factory harnesses. If you would rather have it installed, contact us and we can help you find an installer.
We are sending a massive thank you to Eric for bringing his 2014 Tacoma to our shop! Eric was not happy with a previous aftermarket upgrade in his truck, so we removed his existing equipment and installed our 2014 Tacoma Double Cab System 1B with a single IDQ12 12″ subwoofer.
Vehicle
2014 Toyota Tacoma Double Cab
System
System 1B
Posted
May 2026
Shop
Taco Tunes, San Antonio, TX
Why the Tacoma Direct Integration System was the right fix
Our Tacoma Direct Integration System is designed for simple amp upgrades: plug-and-play installation, full reversibility, and a perfect fit using factory mounts and custom-made wiring harnesses. It works with your stock stereo and most aftermarket head units.
For 2nd Gen Tacoma owners who have already been let down once, that matters. No more mystery wiring, no more patched-in add-ons, just a system built for this truck.
Taco Tunes System 1B for the 2nd Gen Tacoma Double Cab includes
Front doors: tacotunes.com TT65CS component speakers: TT65CS mid-bass drivers (100 watts RMS) on Tacotunes.com speaker mounts, TT65CS crossovers, TT65CS tweeters
Amplification: tacotunes.com TXD20005v2 five-channel amplifier, 100 watts x 4 to each speaker and 800 watts x 1 to the subwoofer
Subwoofer: Tacotunes.com single 12″ subwoofer enclosure with an IDQ12 12″ subwoofer
Install photos
Frequently asked questions
Can Taco Tunes fix a bad aftermarket audio install in a Tacoma?
Yes. On Eric’s 2014 Tacoma we removed the previous equipment and replaced it with a plug-and-play System 1B that uses factory mounts and custom harnesses.
Does System 1B work with the stock radio in a 2014 Tacoma?
Yes. It works with the stock stereo and most aftermarket head units.
Can I install this in my 2005-2015 Tacoma Double Cab myself?
Yes. Taco Tunes products are designed for DIY installs: they bolt to factory mounting points and plug into factory harnesses. If you would rather have it installed, contact us and we can help you find an installer.
We want to send a massive thank you to Leo, who made the 8-hour round trip from the Rio Grande Valley to come out to our shop!
Vehicle
2026 Toyota Tundra TRD Pro JBL
System
System 1B
Posted
May 2026
Shop
Taco Tunes, San Antonio, TX
Leo was tired of the factory JBL audio system in his new 2026 Tundra TRD Pro, so we set him up with our complete JBL Tundra Audio System 1B with full sound deadener matting.
Factory fit, zero splicing
Our 100% plug-and-play solution gives a factory-grade fit with zero modifications to your OEM harnesses, which protects the truck’s electrical system. By capturing a clean, unmodified signal before it reaches the factory amp, the JBL integration system feeds your new amplifiers a consistently flat, high-quality signal.
Upgrade to crystal-clear highs, well-defined mids and powerful bass, all without touching your factory wiring.
The 2022+ Tundra JBL System 1B includes
2022+ JBL Tundra Factory Integration System: 2-harness plug-and-play system, no cutting or splicing factory wires
Front doors: Tacotunes.com TT65CS component speakers: TT65 mid-bass drivers (100 watts RMS), TT65 crossovers, TT65 tweeters in clip-in mounts at the factory A-pillar location, heavy-duty speaker mounts cut to 5.6″, front door harness adapters
Rear doors: TT65CS rear components: TT65 mid-bass drivers (100 watts RMS), TT65 crossover on a heavy-duty rear door crossover mount, TT65 tweeters in clip-in mounts at the factory door location, tweeter harness adapters
Amplification: tacotunes.com TXD20005v2 five-channel amplifier, 100 watts x 4 to each speaker and 800 watts x 1 to the subwoofers
Amp rack: laser-cut rack that bolts to the factory mounting location, no holes drilled in your floor
Subwoofers: Tacotunes Dual 10 HYBRID subwoofer enclosure with two TacoTunes TT10V4 full-size 10″ subwoofers (400 watts RMS each, 800 total)
Keep an eye out for our under-seat fiberglass subwoofer boxes for the Tundra, designed for serious bass lovers, with tons of air space and mounting depth.
Install photos
Frequently asked questions
Is System 1B compatible with the 2026 Tundra TRD Pro?
Yes. System 1B is built for 2022+ JBL-equipped Tundras, including the TRD Pro, using a 2-harness plug-and-play integration system.
Do you have to cut factory wires to upgrade the audio in a 2026 Tundra TRD Pro?
No. Taco Tunes systems for the 2026 Tundra TRD Pro use custom plug-and-play harnesses that connect to the factory plugs, so there is no cutting or splicing. The upgrade is fully reversible if you ever want to go back to stock.
Why do customers drive hours for a Taco Tunes install?
Because we build the parts specifically for Toyotas and install them without cutting factory wiring. Leo came 8 hours round trip; Erik came 14 from El Paso.
We want to send a massive thank you to Erik, who made the 14-hour round trip from El Paso, Texas to come out to our shop.
Vehicle
2025 Toyota Tundra Hybrid JBL
System
System 1B
Posted
March 2026
Shop
Taco Tunes, San Antonio, TX
After a local shop cut into his factory wiring and fried the factory amplifier, Erik’s 2025 JBL-equipped Hybrid Tundra had no audio at all. We spent the next three days carefully repairing the damaged wiring, then upgraded him to our 2022+ JBL Tundra System 1B with full sound deadener.
Why plug-and-play matters on a JBL Tundra
This truck is the perfect example of why seamless plug-and-play integration is our top priority. Your factory wiring and electrical components should never be a casualty of an audio upgrade.
Our 100% plug-and-play solution gives a factory-grade fit with zero modifications to your OEM harnesses, which protects your truck’s electrical system. It captures a clean, unmodified signal before it reaches the factory amp, so your new amplifiers get a consistently flat, high-quality audio signal. The result: crystal-clear highs, well-defined mids and powerful bass.
The 2022+ Tundra JBL System 1B includes
2022+ JBL Tundra Factory Integration System: 2-harness plug-and-play system, no cutting or splicing factory wires
Front doors: Tacotunes.com TT65CS component speakers: TT65 mid-bass drivers (100 watts RMS), TT65 crossovers, TT65 tweeters in clip-in mounts at the factory A-pillar location, heavy-duty speaker mounts cut to 5.6″, front door harness adapters
Rear doors: TT65CS rear components: TT65 mid-bass drivers (100 watts RMS), TT65 crossover on a heavy-duty rear door crossover mount, TT65 tweeters in clip-in mounts at the factory door location, tweeter harness adapters
Amplification: tacotunes.com TXD20005v2 five-channel amplifier, 100 watts x 4 to each speaker and 800 watts x 1 to the subwoofers
Amp rack: laser-cut rack that bolts to the factory mounting location, no holes drilled in your floor
Subwoofers: Tacotunes Dual 10 HYBRID subwoofer enclosure with two TacoTunes TT10V4 full-size 10″ subwoofers (400 watts RMS each, 800 total)
Keep an eye out for our under-seat fiberglass subwoofer boxes for the Tundra, designed for serious bass lovers, with tons of air space and mounting depth.
Install photos
Frequently asked questions
Can a bad audio install damage a Tundra’s JBL amplifier?
Yes. Cutting or splicing into the factory JBL wiring can damage the factory amplifier and leave the truck with no sound, which is what happened to Erik’s Tundra. Plug-and-play harnesses avoid touching the factory wiring at all.
Do you have to cut factory wires to upgrade the audio in a 2022+ Tundra?
No. Taco Tunes systems for the 2022+ Tundra use custom plug-and-play harnesses that connect to the factory plugs, so there is no cutting or splicing. The upgrade is fully reversible if you ever want to go back to stock.
Does System 1B work in the Hybrid Tundra?
Yes. This build used our Dual 10 HYBRID subwoofer enclosure, made to fit the Hybrid Tundra.
A huge thank you to Alec for making the trip out to our San Antonio shop! Alec was tired of the factory audio in his Tundra CrewMax, so we installed our System 1B along with full sound deadener throughout the cab.
Vehicle
2018 Toyota Tundra CrewMax
System
System 1B
Posted
November 2025
Shop
Taco Tunes, San Antonio, TX
The 2007-2019 Tundra CrewMax is one of the most popular trucks we work on, and System 1B is our complete bolt-in answer for owners who want clear highs, solid mids and real bass.
Why the Taco Tunes Tundra Direct Integration System works
Our Tundra Direct Integration System lets you add amplifiers to your stock or aftermarket head unit and get astonishing results. The complete system is plug and play, completely reversible, and bolts to factory mounting locations. Even the wiring harnesses are custom designed for this truck.
One thing to know: starting in 2020, Tundras came with factory Apple CarPlay and Android Auto and need a line output converter (LOC), so those installs are a little different from 2007-2019 trucks. Either way, the system works with your stock stereo and most aftermarket head units.
Taco Tunes System 1B for the Tundra CrewMax includes
Front doors: TT65CS component speakers: TT65CS mid-bass drivers (100 watts RMS), TT65CS crossovers, TT65CS tweeters in Tacotunes.com sail panels, heavy-duty speaker mounts cut to 5.6″
Rear doors: TT65CS rear door components, with tweeters that fit the stock door location
Amplifiers: tacotunes.com TXD3204v4 four-channel amplifier (100 watts x 4) and Tacotunes.com TXD1000.1 subwoofer amp (1000 watts x 1)
Subwoofers: TacoTunes dual subwoofer enclosure with two Tacotunes.com TT12 12″ subwoofers
Extras on this build: full sound deadener matting
Install photos
Frequently asked questions
Do you have to cut factory wires to upgrade the audio in a Tundra CrewMax?
No. Taco Tunes systems for the Tundra CrewMax use custom plug-and-play harnesses that connect to the factory plugs, so there is no cutting or splicing. The upgrade is fully reversible if you ever want to go back to stock.
Why add sound deadener to a Tundra?
Sound deadener cuts door and panel rattles and road noise, so the speakers sound tighter and the bass hits cleaner. It is the easiest way to get more out of any speaker upgrade.
Can I install this in my 2007-2019 Tundra CrewMax myself?
Yes. Taco Tunes products are designed for DIY installs: they bolt to factory mounting points and plug into factory harnesses. If you would rather have it installed, contact us and we can help you find an installer.
A massive thank you to Nate for coming out to our shop!
Vehicle
2025 Toyota Tundra JBL
System
System 1B
Posted
October 2025
Shop
Taco Tunes, San Antonio, TX
Nate was let down by his 2025 JBL Tundra’s audio, so we hooked him up with our killer 2022+ JBL Tundra System 1B and full sound deadener!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Our System 1B includes dual 10” subwoofers in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Our amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!The JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth and 100% plug and play. Requiring ZERO cutting or splicing of your factory wiring.Tacotunes.com TT65cs Front Door mid bass driver. Designed to work with your A-Pillar tweeter, the crossover network is mounted to the amp rack located on the rear wall of your Tundra. A true component setup! Don’t settle for OEM style or low-end coaxial speakers!3 Upgraded dash speakers included!Tacotunes.com TT65cs direct fit silk dome tweeters produce the crisp, clear highs that that perform amazingly well at all listening levels. These tweeters are part of a true component speaker system that communicates with the included crossover network.
Quickly & Easily installed in the factory mounting location of your A-pillar, our clip-in tweeter mounts fit seamlessly with ZERO cutting or modifications needed.Tacotunes JBL tundra front door crossover network is mounted to the amp rack on your rear wall. The crossover network is responsible for directing the proper frequency to the new tweeters in the A-Pillar and the mid bass drivers in the front door. Don’t settle for low end OEM style or coaxial speakers.Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersTacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.Tacotunes 2022+ Tundra dual 10″ subwoofer enclosure installed!Direct tundra integration… Keep your Factory Stereo (JBL Head Unit) and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Factory equipment removedThe pre-amp audio signal is routed to the AVC/LAN interface module then provides that clean flat signal directly to the TXD3204 (4 Channel) & TXD10001 (subwoofer amp). The amps then provide the amplified signal to your speakers via the plug and play speaker harness integration system. There is no need to run new speaker wire. NO cutting or splicing ANY of your factory wires. The system is completely reversible.Plug & Play Harness Connections.
Frequently asked questions
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
A HUGE thank you to Thomas for making his way out to our shop!
Vehicle
2018 Toyota Tundra CrewMax JBL
System
System 1B
Posted
September 2025
Shop
Taco Tunes, San Antonio, TX
Thomas was tired of the factory audio in his 2018 Tundra… So… We installed our System 1B in his 2018 JBL Equipped Crew Max!
How the Taco Tunes system installs
Our Tundra Direct Integration System allows you to easily add amps to your stock or aftermarket head unit (stereo) and obtain astonishing results! In 2020 Tundra’s come equipped from the Factory Apple Car Play / Android Auto and require an LOC, making their installation slightly different than the 07-19 Tundras.
TacoTunes’ complete system is plug and play, completely reversible AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.
Our audio system will work with your stock stereo and most aftermarket head units.
tacotunes.com System 1B
Front Door Component Speakers: TT65cs Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters; tacotunes.com sail panels with tacotunes tweeters
Rear Door Components: TT65CS rear door components.; Tweeters will fit in stock door location.
Amp: tacotunes.com TXD3204v4 Four channel amplifier; Tacotunes.com TXD1000.1 Subwoofer amp; 100 watts x 4 to each speaker and 1000 x 1 (subwoofers)
Our Tacotunes.com dual 12” subwoofer box fits like a glove behind your rear seat! No need to settle for shallow sounding shallow mount subwoofers!Our TacoTunes Laser Cut / CNC Bent Amp Rack bolts to your factory mounting location under your passenger seat. Don’t let anyone drill holes in your baby!
Mounted to the stock mounting locations are the TXD3204v 4 channel amp and TXD1001 subwoofer amp. Using our plug and play harness which is connected to your head unit, these amps provide your new speakers and subwoofer(s) with the power they need for you to have the most ideal listening experience.TT65cs Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. The TT65cs consist of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels. The laser cut crossover mount provides a secure mounting location. There is no need to settle for OEM style speakers AND do NOT recommend using mis-matched coaxial speakers.TT65cs tweeters are mounted in our sail panels. They consist of complete plug and play wiring, which requires ZERO cutting and splicing of your factory wires, making their installation 100% reversible. Tweeter audio frequencies are HIGHLY directional. For the best listening experience, we suggest placing these up high and out of the way where nothing can block the higher frequencies.The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door in the rear door. Don’t settle for low end OEM style!
New tweeter installed in stock door location.Component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or low-end coaxial speakersOur Tundra direct integration system will provide astonishing sound quality and allow you to keep your stock head unit. Most of our customers do not want to change their head unit. However, if you later decide to upgrade, our amps are designed to work with just about any aftermarket option. Whether you keep your stock one, or go aftermarket, our tundra direct integration plug and play harness will require NO cutting or splicing any of your factory wiring. The installation can be easily 100% reversed back to OEM equipment… Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Keep under your hood clean from those loose single fuses with our Laser Cut / CNC Bent Fuse Holder Bracket! Makes adding aftermarket electrical upgrades MUCH easier AND organized!
Frequently asked questions
Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?
Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.
Why do 2020 and newer Tundras need an LOC?
Starting in 2020, Tundras came with factory Apple CarPlay and Android Auto. Adding amplifiers to those head units requires a line output converter (LOC), so the equipment is slightly different from 2007-2019 trucks.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
A HUGE thank you to Charles for making the trip to our shop!
Vehicle
2024 Toyota Tundra SR5 Hybrid
System
System 1B
Posted
August 2025
Shop
Taco Tunes, San Antonio, TX
Charles, who’s from Tennessee, was visiting East Texas for a work trip. He wasn’t happy with the factory audio system in his 2024 SR5 Tundra, so… Charles got in touch with us to schedule an appointment while he was in the state, and we upgraded his truck with our 2022+ NON-HYBRID Tundra System 1B.
The system 1B that includes the following
2022+ Tundra Factory Integration System: 3 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.; NTUNE6 – LOC / Audio leveler & Bass Enhancement module
Front Door Component Speakers: Tacotunes.com TT65CS Component Speakers; Tacotunes.com Heavy Duty Front Door speaker mounts; TT65 Mid bass Drivers -100 Watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com Dash Speaker Wire Harness Adapters; Tweeters Installed in dash location using tweeter adapters.
Rear Door Components: Tacotunes.com TT65CS Component Speakers; Tacotunes.com Budget Friendly speaker mounts cut to 5.6”; TT65 Mid bass drivers Handles -100 watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Tweeter Harness Adapters; Tweeters will fit in stock door location
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD1000.1 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Our Tacotunes.com dual 10” subwoofer box fits like a glove behind your rear seat! Don’t give up your under-seat storage when you can keep it AND enjoy your music!Our System 1B includes dual 10” subwoofer in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Laser Cut / CNC Bent Amp Rack. Bolts behind your rear seat on your passenger side with a stock mounting location. Don’t let audio shops drill holes in your new Tundra! Tacotunes.com TXD1001 Subwoofer amp and TXD3204v 4 channel amp, mounted to rear wall using stock mounting location (bolts).Tacotunes.com TT65cs Front Door Component Speakers. Designed to work with your dash tweeter, you can see the crossover network on the floor that will be hidden under the front kick panel. A true component setup in your Tundra. Don’t settle for OEM style or low-end coaxial speakers!Toyota OEM tweeter compared to tacotunes TT65 midbass driverToyota OEM tweeter compared to tacotunes TT65 tweeterTacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.A closer look at tacotunes TT65cs rear door midbass driverRear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersThe NTUNE6 is designed to keep your stock stereo and add aftermarket amplifiers(s) to your Toyota Tundra. When Toyota added Android Auto & Apple Car play to your Tundra, the bass and audio signal coming from the stock stereo was significantly reduced. This created many problems with bass output and speaker level output.Here is a before & after frequency response (graph) with our NTUNE 6 installed – in this 2022 Toyota Tundra. The frequency response was recorded using a LINE LEVEL RTA (not a microphone RTA). The before picture shows the roll of coming from the stock audio system. The AFTER picture shows the frequency response after we installed the NTUNE6.Direct tundra integration… Keep your stock head unit and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.A HUGE thank to all of our customers who come in with these out of state plates!Tacotunes 2022+ Tundra rear wall amp rack assembled with tacotunes TXD3204 – 4 channel amp AND TXD1000.1 – Subwoofer Amp
Frequently asked questions
What does the NTUNE6 do in a Tundra?
The NTUNE6 is a line output converter, audio leveler and bass enhancement module. It lets you keep your stock stereo and add aftermarket amplifiers while flattening the factory signal.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
Do customers really drive hours for a Taco Tunes install?
Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.
A massive thank you to Steve for coming out to our shop!
Vehicle
2024 Toyota Tundra Hybrid JBL
System
System 1B
Posted
August 2025
Shop
Taco Tunes, San Antonio, TX
Steve was let down by his 2024 JBL Tundra’s audio, so we hooked him up with our killer 2022+ JBL HYBRID Tundra System 1B and full sound deadener!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Tacotunes.com 2022+ Hybrid tundra dual 10″ subwoofer enclosure installedOur amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!Our System 1B includes dual 10” subwoofers in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Tacotunes hybrid tundra amp rack and dual 10″ subwoofer enclosure installedThe JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth and 100% plug and play. Requiring ZERO cutting or splicing of your factory wiring.JBL Integration system installed and JBL amplifier put back into its factory location!Tacotunes JBL tundra front door crossover network is mounted to the amp rack on your rear wall. The crossover network is responsible for directing the proper frequency to the new tweeters in the A-Pillar and the mid bass drivers in the front door. Don’t settle for low end OEM style or coaxial speakers.Tacotunes.com TT65cs Front Door mid bass driver. Designed to work with your A-Pillar tweeter, the crossover network is mounted to the amp rack located on the rear wall of your Tundra. A true component setup! Don’t settle for OEM style or low-end coaxial speakers!Tacotunes.com TT65cs direct fit silk dome tweeters produce the crisp, clear highs that that perform amazingly well at all listening levels. These tweeters are part of a true component speaker system that communicates with the included crossover network.
Quickly & Easily installed in the factory mounting location of your A-pillar, our clip-in tweeter mounts fit seamlessly with ZERO cutting or modifications needed.3 Upgraded dash speakers waiting to be installed!Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersThe TT65 tweeter seamlessly integrates into your factory location using our custom clip-in mount, requiring absolutely no modifications. This ensures a secure and factory-looking upgrade, making it easy to enhance your sound without compromising the look of your Tundra’s interior.Previous equipment boxed up!
Frequently asked questions
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Is there a subwoofer box that fits the Hybrid Tundra?
Yes. Our Hybrid Tundra subwoofer enclosures are custom molded to fit behind the rear seat of the 2022+ Hybrid Tundra while keeping your under-seat storage.
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
A HUGE thank you to Gilbert for making the trip to our shop!
Vehicle
2024 Toyota Tundra Hybrid
System
System 1B
Posted
August 2025
Shop
Taco Tunes, San Antonio, TX
Gilbert was disappointed with the audio system in his 2024 Hybrid Tundra. So.. We got him set up with our 2022+ HYBRID TUNDRA System 1B!
The system 1B that includes the following
2022+ Tundra Factory Integration System: 3 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.; NTUNE6 – LOC / Audio leveler & Bass Enhancement module
Front Door Component Speakers: Tacotunes.com TT65CS Component Speakers; Tacotunes.com Heavy Duty Front Door speaker mounts; TT65 Mid bass Drivers -100 Watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com Dash Speaker Wire Harness Adapters; Tweeters Installed in dash location using tweeter adapters.
Rear Door Components: Tacotunes.com TT65CS Component Speakers; Tacotunes.com Budget Friendly speaker mounts cut to 5.6”; TT65 Mid bass drivers Handles -100 watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Tweeter Harness Adapters; Tweeters will fit in stock door location
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; TacoTunes TT10 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!
Install photos
Our System 1B includes dual 10” subwoofer in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Our Tacotunes.com dual 10” subwoofer box fits like a glove behind your rear seat! Don’t give up your under-seat storage when you can keep it AND enjoy your music!Laser Cut / CNC Bent Amp Rack. Bolts behind your rear seat on your passenger side with a stock mounting location. Don’t let audio shops drill holes in your new Tundra! Tacotunes.com TXD1001 Subwoofer amp and TXD3204v 4 channel amp, mounted to rear wall using stock mounting location (bolts).Rear seats removed and waiting to be re-installed with tacotunes hybrid subwoofer enclosureTacotunes.com TT65cs Front Door Component Speakers. Designed to work with your dash tweeter, you can see the crossover network on the floor that will be hidden under the front kick panel. A true component setup in your Tundra. Don’t settle for OEM style or low-end coaxial speakers.TT55cs crossover network on the floor that will be hidden under the front kick panel. A true component setup in your Tundra. Don’t settle for OEM style or low-end coaxial speakers!Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersThe NTUNE6 is designed to keep your stock stereo and add aftermarket amplifiers(s) to your Toyota Tundra. When Toyota added Android Auto & Apple Car play to your Tundra, the bass and audio signal coming from the stock stereo was significantly reduced. This created many problems with bass output and speaker level output.Here is a before & after frequency response (graph) with our NTUNE 6 installed – in this 2022 Toyota Tundra. The frequency response was recorded using a LINE LEVEL RTA (not a microphone RTA). The before picture shows the roll of coming from the stock audio system. The AFTER picture shows the frequency response after we installed the NTUNE6.Direct tundra integration… Keep your stock head unit and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.
Frequently asked questions
What does the NTUNE6 do in a Tundra?
The NTUNE6 is a line output converter, audio leveler and bass enhancement module. It lets you keep your stock stereo and add aftermarket amplifiers while flattening the factory signal.
Is there a subwoofer box that fits the Hybrid Tundra?
Yes. Our Hybrid Tundra subwoofer enclosures are custom molded to fit behind the rear seat of the 2022+ Hybrid Tundra while keeping your under-seat storage.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
A HUGE thank you to John for making his way out to our shop!
Vehicle
2020 Toyota Tundra JBL
System
System 1B
Posted
June 2025
Shop
Taco Tunes, San Antonio, TX
John was tired of the factory audio in his 2020 JBL Equipped Tundra.
So… We installed our System 1B with our fiberglass subwoofer enclosure alongside COMPLETE sound deadener matting!
How the Taco Tunes system installs
Our Tundra Direct Integration System allows you to easily add amps to your stock or aftermarket head unit (stereo) and obtain astonishing results! In 2020 Tundra’s come equipped from the Factory Apple Car Play / Android Auto and require an LOC, making their installation slightly different than the 07-19 Tundras.
TacoTunes’ complete system is plug and play, completely reversible AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.
Our audio system will work with your stock stereo and most aftermarket head units.
tacotunes.com System 1B
Front Door Component Speakers: TT65cs Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters; tacotunes.com sail panels with tacotunes tweeters
Rear Door Components: TT65CS rear door components.; Tweeters will fit in stock door location.
Amp: tacotunes.com TXD3204v4 Four channel amplifier; Tacotunes.com TXD1000.1 Subwoofer amp; 100 watts x 4 to each speaker and 1000 x 1 (subwoofers)
Our Tacotunes.com dual 12” fiberglass subwoofer box consists of 4.2 Cubic ft of air space AND fits like a glove behind your rear seat! No need to settle for shallow sounding shallow mount subwoofers!Tacotunes fiberglass subwoofer enclosure waiting to be installed!Our TacoTunes Laser Cut / CNC Bent Amp Rack bolts to your factory mounting location under your passenger seat. Don’t let anyone drill holes in your baby!
Mounted to the stock mounting locations are the TXD3204v 4 channel amp and TXD1001 subwoofer amp. Using our plug and play harness which is connected to your head unit, these amps provide your new speakers and subwoofer(s) with the power they need for you to have the most ideal listening experience.TT65cs Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. The TT65cs consist of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels. The laser cut crossover mount provides a secure mounting location. There is no need to settle for OEM style speakers AND do NOT recommend using mis-matched coaxial speakers.TT65cs tweeters are mounted in our sail panels. They consist of complete plug and play wiring, which requires ZERO cutting and splicing of your factory wires, making their installation 100% reversible. Tweeter audio frequencies are HIGHLY directional. For the best listening experience, we suggest placing these up high and out of the way where nothing can block the higher frequencies.Component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or low-end coaxial speakersThe crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door in the rear door. Don’t settle for low end OEM style!
New tweeter installed in stock door location.A closer look at the TT65cs rear door midbass driverOur Taco tunes TT65cs Rear door speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersOur Tundra direct integration system will provide astonishing sound quality and allow you to keep your stock head unit. Most of our customers do not want to change their head unit. However, if you later decide to upgrade, our amps are designed to work with just about any aftermarket option. Whether you keep your stock one, or go aftermarket, our tundra direct integration plug and play harness will require NO cutting or splicing any of your factory wiring. The installation can be easily 100% reversed back to OEM equipment… Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Keep under your hood clean from those loose single fuses with our Laser Cut / CNC Bent Fuse Holder Bracket! Makes adding aftermarket electrical upgrades MUCH easier AND organized!Keep your factory equipment in the event of trade in with tacotunes 100% reversible audio system!Rear wall matted and ready for the subwoofer enclosure!
Frequently asked questions
Why do 2020 and newer Tundras need an LOC?
Starting in 2020, Tundras came with factory Apple CarPlay and Android Auto. Adding amplifiers to those head units requires a line output converter (LOC), so the equipment is slightly different from 2007-2019 trucks.
What is the advantage of a fiberglass subwoofer enclosure?
A custom fiberglass enclosure can be molded to the truck’s shape, giving maximum air space behind the rear seat. More air space lets the subwoofers play deeper and louder.
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
We extend a big thank you to Enrique for visiting our shop with his 2024 NON-HYBRID Tundra!
Vehicle
2024 Toyota Tundra
Posted
May 2025
Shop
Taco Tunes, San Antonio, TX
Enrique came to us with a previously installed subwoofer system in his tundra. Unfortunately, the previous installers spliced is factory wires and the bass output from his previous subwoofer system did not meet his expectations.
He was looking to significantly upgrade his audio, specifically wanting his speakers LOUD and also wanting 12-inch subwoofers to enhance the factory JBL system.
Since he lives around the corner, Enrique agreed to be our “Test Subject”, and we asked him to choose between our TT10” subwoofers, or shallow mount 12” subwoofers.
So… with a little extra time, We custom-installed our “upgraded” System 1b for him, which included 150 watts to each door speaker (our regular system 1b is 100watts x4) and two 12-inch shallow mount subwoofers, expertly fitted into our HYBRID Tundra subwoofer enclosure.
Enrique called us back stating the 12-inch shallow mount subwoofers lacked the depth he desired. He came back to swap over to our TT10 full-size subwoofers, and the difference was clear: he left thrilled by the richer, more immersive audio experience.
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
JBL Tundra Component Speaker package: CXS64 Mid bass Drivers -150 Watts RMS; CXS64 Crossovers; CXS64 Tweeters; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com speaker mounts cut to 5.6”; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers x3; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: 150 watts RMS x4 – four channel amplifier; tacotunes.com TXD1000.1 – Mono subwoofer amplifier; 150 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Enrique’s previous audio/subwoofer set up.CXS64 Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. The CXS64 consists of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels.Tacotunes.com TT65cs direct fit silk dome tweeters produce the crisp, clear highs that that perform amazingly well at all listening levels. These tweeters are part of a true component speaker system that connects to the included crossover network.
Quickly & Easily installed in the factory mounting location of your A-pillar, our clip-in tweeter mounts fit seamlessly with ZERO cutting or modifications needed.3 Upgraded Dash speakers!Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersThe TT65 tweeter seamlessly integrates into your factory location using our custom clip-in mount, requiring absolutely no modifications. This ensures a secure and factory-looking upgrade, making it easy to enhance your sound without compromising the look of your Tundra’s interior.Our amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is the 150 watt x4, and 4 Channel Amp, TXD1000.1 subwoofer amp, with TT65cs Front door crossover network hidden under the storage copartment. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!The JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth and 100% plug and play. Requiring ZERO cutting or splicing of your factory wiring.The pre-amp audio signal is routed to the AVC/LAN interface module then provides that clean flat signal directly to the TXD3204 (4 Channel) & TXD10001 (subwoofer amp). The amps then provide the amplified signal to your speakers via the plug and play speaker harness integration system. There is no need to run new speaker wire. NO cutting or splicing ANY of your factory wires. The system is completely reversible.Plug & Play Harness Connections.Bass knob installed in factory location. Allowing you to adjust your subwoofers to your liking!
Frequently asked questions
Are shallow-mount 12″ subs better than full-size 10″ subs in a Tundra?
Not in our experience. Enrique tried two 12″ shallow-mount subs first, but they lacked depth. After switching to our full-size TT10 10″ subwoofers, he got richer, deeper bass.
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Why shouldn’t an audio shop splice my Tundra’s factory wiring?
Cutting or splicing factory wiring can damage JBL components and create problems that are expensive to repair. We repair a large number of JBL-equipped Toyotas for this reason, and there is no need to cut anything with plug-and-play harnesses.