Posted on

2024 Toyota Tacoma TRD Pro JBL Subwoofer Upgrade: Starter Powered Sub for Glen

Glen's black 2024 Toyota Tacoma TRD Pro with JBL audio parked on the beach next to a red Suzuki Hayabusa

We get so busy installing that we often forget or have no time to grab photos of the trucks before they roll out! A big thank you to Glen for sending us these shots of his 2024 Toyota Tacoma TRD Pro. Glen is a local San Antonio customer who wanted more bass out of his TRD Pro’s JBL system, so we installed our 2024 Tacoma TRD Pro subwoofer upgrade, the 2024+ Tacoma “STARTER” Add-A-Subwoofer kit. He left a happy camper!

Vehicle2024 Toyota Tacoma TRD Pro
BodyDouble Cab, Short Bed
Factory audioJBL
System2024+ Tacoma Starter Powered Subwoofer Kit
CustomerGlen, local San Antonio install
PostedNovember 2026
ShopTaco Tunes, San Antonio, TX

More bass for a JBL 2024 Tacoma TRD Pro

The factory JBL system in the TRD Pro sounds clean, but it runs out of low end fast. Our Starter powered subwoofer plugs into the JBL amplifier’s signals with a plug-and-play harness and adds a ported 10″ sub with its own 350-watt amp. No cutting or splicing of factory wires, and it is 100% reversible.

Glen’s TRD Pro is basically the same truck and setup as Manuel’s 2026 Tacoma TRD Pro Starter sub install, so if you want to see more of the install itself, check that post out too. You can find thousands more Tacoma upgrades in our Tacoma install gallery and on our Facebook page.

What is in the 2024+ Tacoma Starter Add-A-Subwoofer kit

  • Enclosure: Tacotunes PORTED powered subwoofer enclosure that fits behind the rear seat
  • Onboard amplifier: Tacotunes mono signal onboard amp, 350 watts RMS
  • Subwoofer: Tacotunes TT10, full-size 10″ subwoofer
  • Integration: plug-and-play harness for the factory JBL amplifier signals

Photos

Frequently asked questions

Will a powered subwoofer work with the JBL system in a 2024 Tacoma TRD Pro?

Yes. The Starter kit’s plug-and-play harness connects to the JBL amplifier’s signals in the 2024+ Tacoma, so you keep the factory head unit and JBL speakers and add real bass.

Where does the subwoofer go in a Tacoma Double Cab?

The ported enclosure fits behind the rear seat and bolts to factory mounting points, so you keep your bed and cab storage.

Is the Starter powered sub reversible?

Yes. There is no cutting or splicing of factory wiring, so it can go back to stock any time.

Can you install it at your San Antonio shop?

Yes. Glen is a local customer and we did his install in our shop. Contact us to schedule, or install it yourself: the kit is designed for DIY installs.

Posted on

2026 Toyota Tacoma TRD Pro JBL Subwoofer Upgrade: Starter Powered Sub for Manuel

Manuel with his 2026 Toyota Tacoma TRD Pro at Taco Tunes after a JBL powered subwoofer upgrade

A HUGE thank you to Manuel for bringing his awesome 2026 Toyota Tacoma TRD Pro into our shop! Manuel felt let down by his factory audio system and was ready to add some REAL bass, so we hooked him up with our 2024+ Tacoma “STARTER” Add-A-Subwoofer kit.

Vehicle2026 Toyota Tacoma TRD Pro
BodyDouble Cab, Short Bed
Factory audioJBL
System2024+ Tacoma Starter Powered Subwoofer Kit
PostedNovember 2026
ShopTaco Tunes, San Antonio, TX

Real bass for a JBL 2026 Tacoma TRD Pro

This powered subwoofer system uses a plug-and-play harness to integrate seamlessly with the JBL amplifier’s signals, delivering a significant bass boost. It is an easy, 100% reversible, plug-and-play audio upgrade that truly enhances the sound, with no cutting or splicing of factory wires.

Curious to see more? You will find thousands of photos and videos of Tacoma upgrades we have completed for private owners and Toyota dealers in our Tacoma install gallery and on our Facebook page.

Tacotunes 2024+ Tacoma Starter Add-A-Subwoofer Kit includes

  • Enclosure: Tacotunes PORTED powered subwoofer enclosure
  • Onboard amplifier: Tacotunes mono signal onboard amp, 350 watts RMS
  • Subwoofer: Tacotunes TT10, full-size 10″ subwoofer
  • Integration: plug-and-play harness that works with JBL and non-JBL factory signals

Install photos

Frequently asked questions

Does the Starter powered subwoofer work with JBL audio in a 2026 Tacoma TRD Pro?

Yes. The kit’s plug-and-play harness integrates with the JBL amplifier’s signals in the 2024+ Tacoma, adding a ported 10″ sub and 350-watt amp to the factory JBL system.

Is the powered subwoofer upgrade reversible?

Yes. It plugs into the factory harness with no cutting or splicing, so it is 100% reversible if you ever want to go back to stock.

Can I install this in my 2024+ Tacoma myself?

Yes. Taco Tunes products are designed for DIY installs: they bolt to factory mounting points and plug into factory harnesses. If you would rather have it installed, contact us and we can help you find an installer.

Posted on

From Minnesota to San Antonio: 2025 Tacoma JBL Audio Upgrade With Volition + Sound Deadener

Trae and the Taco Tunes crew with his 2025 Toyota Tacoma after the JBL Volition audio upgrade

A massive thank you to Trae for driving ALL the way from Minnesota to our San Antonio shop! Trae wasn’t happy with the factory audio system in his 2025 Tacoma, so we installed our complete JBL Tacoma Volition Audio System with complete sound deadener.

Vehicle2025 Toyota Tacoma JBL
SystemJBL Tacoma Volition Audio System + complete sound deadener
Customer fromMinnesota
PostedNovember 2026
ShopTaco Tunes, San Antonio, TX

Plug-and-play JBL integration for the 2025 Tacoma

Our 100% plug-and-play solution delivers a factory-grade fit with zero modifications to your OEM harnesses, preserving your truck’s electrical integrity. By capturing a clean, unmodified signal before it reaches the factory amp, our JBL integration system gives your new amplifier a consistently flat, high-quality audio signal. The result is crystal-clear highs, well-defined mids and powerful bass.

Complete sound deadener in the doors keeps road noise out and stops panel rattles, so the new speakers sound tighter at every volume. Learn more about how Volition, our upgradeable 2024+ Tacoma audio system, is built, or browse thousands of photos and videos of Toyotas we’ve upgraded for private owners and Toyota dealers in our Tacoma install gallery.

The 2024+ Tacoma JBL Volition Audio System includes

  • 2024+ JBL Tacoma Factory Integration System: 2-harness plug-and-play system, no cutting or splicing of your Tacoma’s wiring
  • Front doors: TacoTunes TT65CS component speakers: TT65 mid-bass drivers (125 watts RMS), TT65 crossovers, TT65 tweeters in clip-in mounts at the factory A-pillar location, front door speaker mounts and harness adapters
  • Dash: 3.5″ dash replacement speakers with dash speaker harness adapters
  • Rear doors: ID65 coaxial speakers (100 watts RMS) on heavy-duty 5.6″ mounts with speaker harness adapters
  • Amplifier: TXD20005v2 five-channel amplifier: 100 watts RMS x 4 to the speakers and 500 watts RMS x 1 to the subwoofer
  • Laser-cut amp rack: bolts directly to the factory mounting locations, so no one drills holes in your floor
  • Subwoofer: TacoTunes single 10″ subwoofer enclosure with a TT10V4 full-size 10″ subwoofer, 500 watts RMS
  • Sound deadener: complete sound deadener treatment for the doors

Install photos

Frequently asked questions

Do you have to replace the JBL amplifier in a 2025 Tacoma?

No. The JBL integration system captures a clean signal before it reaches the factory amp and feeds it to the new Taco Tunes amplifier, using two plug-and-play harnesses.

Do you have to cut factory wires to upgrade the audio in a 2025 Tacoma?

No. Taco Tunes systems for the 2024+ Tacoma use custom plug-and-play harnesses that connect to the factory plugs, so there is no cutting or splicing. The upgrade is fully reversible if you ever want to go back to stock.

Is sound deadener worth it in a 2025 Tacoma?

Yes. Sound deadener cuts road noise and door panel rattles, which lets new component speakers and mid-bass drivers sound cleaner and hit harder, especially at highway speeds.

I live out of state. Can I still get a Taco Tunes system?

Yes. Customers like Trae drive in from all over the country, but every Taco Tunes system is also designed for DIY installs, bolting to factory mounting points and plugging into factory harnesses. Contact us and we can also help you find an installer near you.

Posted on

2025 JBL Tacoma Powered Subwoofer Install: Starter Add-A-Sub Kit

2025 JBL Tacoma Powered Subwoofer Install by Taco Tunes, photo 1 of 5

A huge thank you to Gary for bringing his 2025 JBL-equipped Tacoma into our shop! Gary was let down by the factory JBL subwoofer and ready to ditch it for real bass, so we hooked him up with our 2024+ Tacoma “STARTER” Add-A-Subwoofer kit.

Vehicle2025 Toyota Tacoma JBL
SystemStarter Add-A-Sub
PostedSeptember 2026
ShopTaco Tunes, San Antonio, TX

What the Starter kit does

It is a powered subwoofer with a plug-and-play harness that integrates with the JBL amplifier’s signals. You get a significant bass boost in an easy, 100% reversible upgrade that leaves the rest of the factory system alone.

Tacotunes 2024+ Tacoma Starter Add-A-Subwoofer Kit includes

  • Enclosure: Tacotunes PORTED powered subwoofer enclosure
  • Onboard amplifier: Tacotunes mono signal onboard amp, 350 watts RMS
  • Subwoofer: Tacotunes TT10, full-size 10″ subwoofer
  • Integration: plug-and-play harness that works with the factory JBL amplifier signal

Install photos

Frequently asked questions

How much power does the Tacoma Starter Add-A-Sub kit have?

Gary’s kit used the Tacotunes mono signal onboard amp at 350 watts RMS driving a full-size TT10 10″ subwoofer in a ported enclosure.

Do you have to cut factory wires to upgrade the audio in a 2025 Tacoma?

No. Taco Tunes systems for the 2025 Tacoma use custom plug-and-play harnesses that connect to the factory plugs, so there is no cutting or splicing. The upgrade is fully reversible if you ever want to go back to stock.

Can I install this in my 2024+ Tacoma myself?

Yes. Taco Tunes products are designed for DIY installs: they bolt to factory mounting points and plug into factory harnesses. If you would rather have it installed, contact us and we can help you find an installer.

Posted on

2026 Tacoma Hybrid JBL Audio System Upgrade With Complete Sound Deadener

2026 Tacoma JBL Audio System Upgrade With Complete Sound Deadener by Taco Tunes, photo 1 of 13

We want to send a massive thank you to Kyle for coming out to our shop! Kyle was tired of the factory JBL audio system in his new 2026 Tacoma i-FORCE MAX Hybrid, so we set him up with our complete JBL Tacoma Audio System alongside complete sound deadener.

Vehicle2026 Toyota Tacoma i-FORCE MAX Hybrid, JBL
PostedSeptember 2026
ShopTaco Tunes, San Antonio, TX

Plug-and-play JBL integration

Our 100% plug-and-play solution gives a factory-grade fit with zero modifications to your OEM harnesses. By capturing a clean, unmodified signal before it reaches the factory amp, our JBL integration system gives your new amplifier a flat, high-quality signal. That means crystal-clear highs, well-defined mids and powerful bass, with zero changes to your factory wiring.

Hybrid vs. non-hybrid Tacoma: why the subwoofer goes behind the seat

Kyle’s Tacoma has the i-FORCE MAX hybrid powertrain, a 2.4L turbo four paired with an electric motor for 326 hp and 465 lb-ft of torque. That extra power comes with one packaging change that matters for audio: the hybrid battery pack sits under the rear seat.

  • Hybrid (i-FORCE MAX): the space under the rear seat is taken by the battery pack, so the subwoofer enclosure has to mount behind the rear seat, against the back wall of the cab. Our hybrid enclosure is shaped for that spot, so it fits tight without blocking the battery’s cooling airflow or eating into your cabin.
  • Non-hybrid (i-FORCE 2.4L turbo): there is no battery pack under the seat, so that area stays open and there are more mounting options for the subwoofer and amplifier.

Because the two trucks package differently, the parts are not interchangeable. When you order, tell us whether your Tacoma is a hybrid and whether it has the JBL system, and we will make sure you get the right enclosure and harnesses. Not sure? Look for the i-FORCE MAX badge, or contact Taco Tunes support with your VIN.

The 2024+ Tacoma JBL System 1 includes

  • 2024+ JBL Tacoma Factory Integration System: 2-harness plug-and-play system, no cutting or splicing factory wires
  • Front doors: Tacotunes.com TT65CS component speakers: TT65 mid-bass drivers (100 watts RMS), TT65 crossovers, TT65 tweeters in clip-in mounts at the factory A-pillar location, front door speaker mounts, front door harness adapters
  • Dash: 3.5″ dash replacement speakers with Tacotunes.com dash speaker harness adapters
  • Rear doors: ID65 coaxial speakers (100 watts RMS) on heavy-duty 5.6″ mounts with speaker harness adapters
  • Amplification: tacotunes.com TXD20005v2 five-channel amplifier, 100 watts x 4 to the speakers and 800 watts x 1 to the subwoofer
  • Amp rack: laser-cut rack that bolts to the factory mounting location
  • Subwoofer: Tacotunes single 10 subwoofer enclosure with a TacoTunes TT10V4 full-size 10″ subwoofer (500 watts RMS)

Install photos

Frequently asked questions

Do you have to replace the JBL amplifier in a 2026 Tacoma?

No. The JBL integration system captures the signal before it reaches the factory amp and feeds it to the new Taco Tunes amplifier, using two plug-and-play harnesses.

Do you have to cut factory wires to upgrade the audio in a 2026 Tacoma?

No. Taco Tunes systems for the 2026 Tacoma use custom plug-and-play harnesses that connect to the factory plugs, so there is no cutting or splicing. The upgrade is fully reversible if you ever want to go back to stock.

Can I install this in my 2024+ Tacoma myself?

Yes. Taco Tunes products are designed for DIY installs: they bolt to factory mounting points and plug into factory harnesses. If you would rather have it installed, contact us and we can help you find an installer.

Where does the subwoofer go in a hybrid 2026 Tacoma?

Behind the rear seat. The i-FORCE MAX hybrid battery pack sits under the rear seat, so Taco Tunes uses a hybrid-specific enclosure that mounts against the back wall of the cab. Non-hybrid Tacomas do not have the battery there, which leaves more mounting options.

Posted on

Mudbath Monday: Two 2026 Tacoma TRD Off-Roads Get the Volition Sound Upgrade

2026 Toyota Tacoma TRD Off-Road Volition audio install by Taco Tunes, photo 1 of 13

It was Mudbath Monday at Taco Tunes, and we doubled down in the shop! Two 2026 Toyota Tacoma TRD Off-Roads hit the bays for the ultimate sound overhaul:

Vehicle2026 Toyota Tacoma
SystemVolition
PostedAugust 2026
ShopTaco Tunes, San Antonio, TX
  • Truck 1: Hybrid with the factory JBL system
  • Truck 2: non-Hybrid with ANC-equipped base audio

Both trucks got our complete sound-matting treatment and the Volition Audio System. The full breakdown video is on our Facebook page.

Factory fit. Audiophile performance. Zero splicing.

Stop letting shops drill holes in your floor pans or butcher your factory wiring. Our true plug-and-play setup integrates with the Tacoma’s OEM harness and protects your electrical system.

  • ReCurve EVO DSP: mounts under the driver’s seat and pulls signal directly from the head unit, custom-tuned for sharp staging
  • Precision amp rack: laser-cut to bolt into factory locations
  • Built for the Tacoma: custom mounts and exact-match connectors throughout

The 2024+ Tacoma Volition Audio System includes

  • 2024+ Tacoma Factory Integration System: plug-and-play harness system, no cutting or splicing factory wires
  • Signal processing: ReCurve EVO DSP, a direct-fit unit under the driver’s seat that takes signal straight from the head unit and is custom-tuned for the listener
  • Front doors: Tacotunes.com TT65CS component speakers: TT65 mid-bass drivers (100 watts RMS), TT65 crossovers, TT65 tweeters in the factory dash location, heavy-duty 5.6″ mounts, front door harness adapters
  • Rear doors: ID65 coaxial speakers (100 watts RMS) on 5.6″ mounts with speaker harness adapters
  • Amplification: tacotunes.com TXD20005v2 five-channel amplifier, 125 watts x 4 to the doors and 500 watts x 1 to the subwoofer
  • Amp rack: laser-cut rack that bolts to the factory mounting location
  • Subwoofer: Tacotunes single 10 subwoofer enclosure with a TacoTunes TT10V4 full-size 10″ subwoofer (500 watts RMS)

Install photos

Frequently asked questions

Does Volition work with both JBL and base audio 2026 Tacomas?

Yes. In this shoot one truck was a Hybrid with factory JBL and the other a non-Hybrid with ANC-equipped base audio, and both got the Volition system.

Will a sound upgrade affect the ANC in a base-audio Tacoma?

This non-Hybrid TRD Off-Road had ANC-equipped base audio and received the full Volition upgrade. Contact us about your specific truck before you order.

Do you have to cut factory wires to upgrade the audio in a 2026 Tacoma?

No. Taco Tunes systems for the 2026 Tacoma use custom plug-and-play harnesses that connect to the factory plugs, so there is no cutting or splicing. The upgrade is fully reversible if you ever want to go back to stock.

Posted on

2026 Toyota Tundra JBL System 1B Install: Components, Dual 10s & Sound Deadener

2026 Toyota Tundra JBL System 1B Install by Taco Tunes, photo 1 of 22

We want to send a massive thank you to Kenneth for coming out to our shop! Kenneth was tired of the factory JBL audio system in his new 2026 Tundra, so we set him up with our complete JBL Tundra Audio System 1B with full sound deadener matting.

Vehicle2026 Toyota Tundra JBL
SystemSystem 1B
PostedAugust 2026
ShopTaco Tunes, San Antonio, TX

Kenneth’s build ran a two-amp setup: a dedicated four-channel amp for the doors and a separate mono amp just for the dual 10″ subwoofers.

How the JBL integration keeps your Tundra factory-safe

Our 100% plug-and-play solution gives a factory-grade fit with zero modifications to your OEM harnesses. It captures a clean, unmodified signal before it reaches the factory amp, so the new amplifiers get a consistently flat, high-quality signal. You get crystal-clear highs, well-defined mids and powerful bass without a single cut wire.

The 2022+ Tundra JBL System 1B includes

  • 2022+ JBL Tundra Factory Integration System: 2-harness plug-and-play system, no cutting or splicing factory wires
  • Front doors: Tacotunes.com TT65CS component speakers: TT65 mid-bass drivers (100 watts RMS), TT65 crossovers, TT65 tweeters in clip-in mounts at the factory A-pillar location, heavy-duty speaker mounts cut to 5.6″, front door harness adapters
  • Dash: 3.5″ dash replacement speakers with Tacotunes.com dash speaker harness adapters
  • Rear doors: TT65CS rear components: TT65 mid-bass drivers (100 watts RMS), TT65 crossover on a heavy-duty rear door crossover mount, TT65 tweeters in clip-in mounts at the factory door location, tweeter harness adapters
  • Amplification: tacotunes.com TXD3204v3 4-channel amplifier and TXD1000.1v2 mono amplifier: 100 watts x 4 to the door speakers and 800 watts x 1 to the subwoofers
  • Amp rack: laser-cut rack that bolts to the factory mounting location, no holes drilled in your floor
  • Subwoofers: Tacotunes Dual 10 HYBRID subwoofer enclosure with two TacoTunes TT10V4 full-size 10″ subwoofers (400 watts RMS each, 800 total)

Keep an eye out for our under-seat fiberglass subwoofer boxes for the Tundra, designed for serious bass lovers, with tons of air space and mounting depth.

Install photos

Frequently asked questions

What is the difference between a one-amp and two-amp System 1B?

Some builds use a single five-channel amplifier for doors and subs. Kenneth’s used a TXD3204v3 four-channel amp for the doors and a TXD1000.1v2 mono amp for the subwoofers. Both plug into the same JBL integration system.

Do you have to cut factory wires to upgrade the audio in a 2026 Tundra?

No. Taco Tunes systems for the 2026 Tundra use custom plug-and-play harnesses that connect to the factory plugs, so there is no cutting or splicing. The upgrade is fully reversible if you ever want to go back to stock.

Can I install this in my 2022+ Tundra myself?

Yes. Taco Tunes products are designed for DIY installs: they bolt to factory mounting points and plug into factory harnesses. If you would rather have it installed, contact us and we can help you find an installer.

Posted on

2025 JBL Tacoma Subwoofer Upgrade: Ditching the Factory Sub for Real Bass

2025 JBL Tacoma Subwoofer Upgrade by Taco Tunes, photo 1 of 4

A huge thank you to Willie for bringing his 2025 JBL-equipped Tacoma into our shop! Willie was let down by the factory JBL subwoofer and ready to ditch it for some real bass. So we hooked him up with our 2024+ Tacoma “STARTER” Add-A-Subwoofer kit.

Vehicle2025 Toyota Tacoma JBL
PostedJuly 2026
ShopTaco Tunes, San Antonio, TX

Why the Starter kit is the go-to first upgrade for the 4th Gen Tacoma

This powered subwoofer system uses a plug-and-play harness to integrate with the JBL amplifier’s signals for a big bass boost. It is easy, 100% reversible, and enhances the whole sound experience without replacing the rest of your factory system.

Tacotunes 2024+ Tacoma Starter Add-A-Subwoofer Kit includes

  • Enclosure: Tacotunes PORTED powered subwoofer enclosure
  • Onboard amplifier: Tacotunes mono signal onboard amp, 450 watts RMS
  • Subwoofer: Tacotunes TT10, full-size 10″ subwoofer
  • Integration: plug-and-play harness that works with the factory JBL amplifier signal

Install photos

Frequently asked questions

Can I replace the factory JBL subwoofer in a 2025 Tacoma?

You can add a much stronger one. The Starter kit plugs into the JBL amplifier’s signals and adds a ported 10″ powered sub.

Do you have to cut factory wires to upgrade the audio in a 2025 Tacoma?

No. Taco Tunes systems for the 2025 Tacoma use custom plug-and-play harnesses that connect to the factory plugs, so there is no cutting or splicing. The upgrade is fully reversible if you ever want to go back to stock.

Can I install this in my 2024+ Tacoma myself?

Yes. Taco Tunes products are designed for DIY installs: they bolt to factory mounting points and plug into factory harnesses. If you would rather have it installed, contact us and we can help you find an installer.

Posted on

2024 Tacoma Limited JBL Audio Upgrade: Complete System 1 Install

2024 Tacoma Limited JBL Audio Upgrade by Taco Tunes, photo 1 of 11

We want to send a massive thank you to Evelyn for coming out to our shop again! Evelyn and her husband are longtime customers, and she was tired of the factory JBL audio system in her new 2024 Tacoma Limited.

Vehicle2024 Toyota Tacoma Limited JBL
SystemSystem 1
PostedJune 2026
ShopTaco Tunes, San Antonio, TX

So we set her up with our complete JBL Tacoma Audio System 1.

Plug-and-play JBL integration for the 4th Gen Tacoma

Our 100% plug-and-play solution gives a factory-grade fit with zero modifications to your OEM harnesses, so your truck’s electrical system stays intact. It captures a clean, unmodified signal before it reaches the factory amp, giving the new amplifier a flat, high-quality signal to work with.

The result is crystal-clear highs, well-defined mids and powerful bass, with zero changes to your factory wiring.

The 2024+ Tacoma JBL System 1 includes

  • 2024+ JBL Tacoma Factory Integration System: 2-harness plug-and-play system, no cutting or splicing factory wires
  • Front doors: Tacotunes.com TT65CS component speakers: TT65 mid-bass drivers (100 watts RMS), TT65 crossovers, TT65 tweeters in clip-in mounts at the factory A-pillar location, front door speaker mounts, front door harness adapters
  • Dash: 3.5″ dash replacement speakers with Tacotunes.com dash speaker harness adapters
  • Rear doors: ID65 coaxial speakers (100 watts RMS) on heavy-duty 5.6″ mounts with speaker harness adapters
  • Amplification: tacotunes.com TXD20005v2 five-channel amplifier, 100 watts x 4 to the speakers and 800 watts x 1 to the subwoofer
  • Amp rack: laser-cut rack that bolts to the factory mounting location
  • Subwoofer: Tacotunes single 10 subwoofer enclosure with a TacoTunes TT10V4 full-size 10″ subwoofer (500 watts RMS)

Install photos

Frequently asked questions

Can you upgrade the JBL system in a 2024 Tacoma Limited?

Yes. The 2024+ JBL Tacoma Factory Integration System uses two plug-and-play harnesses, so the full System 1 installs without cutting or splicing.

Do you have to cut factory wires to upgrade the audio in a 2024 Tacoma?

No. Taco Tunes systems for the 2024 Tacoma use custom plug-and-play harnesses that connect to the factory plugs, so there is no cutting or splicing. The upgrade is fully reversible if you ever want to go back to stock.

Can I install this in my 2024+ Tacoma myself?

Yes. Taco Tunes products are designed for DIY installs: they bolt to factory mounting points and plug into factory harnesses. If you would rather have it installed, contact us and we can help you find an installer.

Posted on

2026 Tundra TRD Pro JBL Audio Upgrade: System 1B + Full Sound Deadener

2026 Tundra TRD Pro JBL Audio Upgrade by Taco Tunes, photo 1 of 20

We want to send a massive thank you to Leo, who made the 8-hour round trip from the Rio Grande Valley to come out to our shop!

Vehicle2026 Toyota Tundra TRD Pro JBL
SystemSystem 1B
PostedMay 2026
ShopTaco Tunes, San Antonio, TX

Leo was tired of the factory JBL audio system in his new 2026 Tundra TRD Pro, so we set him up with our complete JBL Tundra Audio System 1B with full sound deadener matting.

Factory fit, zero splicing

Our 100% plug-and-play solution gives a factory-grade fit with zero modifications to your OEM harnesses, which protects the truck’s electrical system. By capturing a clean, unmodified signal before it reaches the factory amp, the JBL integration system feeds your new amplifiers a consistently flat, high-quality signal.

Upgrade to crystal-clear highs, well-defined mids and powerful bass, all without touching your factory wiring.

The 2022+ Tundra JBL System 1B includes

  • 2022+ JBL Tundra Factory Integration System: 2-harness plug-and-play system, no cutting or splicing factory wires
  • Front doors: Tacotunes.com TT65CS component speakers: TT65 mid-bass drivers (100 watts RMS), TT65 crossovers, TT65 tweeters in clip-in mounts at the factory A-pillar location, heavy-duty speaker mounts cut to 5.6″, front door harness adapters
  • Dash: 3.5″ dash replacement speakers with Tacotunes.com dash speaker harness adapters
  • Rear doors: TT65CS rear components: TT65 mid-bass drivers (100 watts RMS), TT65 crossover on a heavy-duty rear door crossover mount, TT65 tweeters in clip-in mounts at the factory door location, tweeter harness adapters
  • Amplification: tacotunes.com TXD20005v2 five-channel amplifier, 100 watts x 4 to each speaker and 800 watts x 1 to the subwoofers
  • Amp rack: laser-cut rack that bolts to the factory mounting location, no holes drilled in your floor
  • Subwoofers: Tacotunes Dual 10 HYBRID subwoofer enclosure with two TacoTunes TT10V4 full-size 10″ subwoofers (400 watts RMS each, 800 total)

Keep an eye out for our under-seat fiberglass subwoofer boxes for the Tundra, designed for serious bass lovers, with tons of air space and mounting depth.

Install photos

Frequently asked questions

Is System 1B compatible with the 2026 Tundra TRD Pro?

Yes. System 1B is built for 2022+ JBL-equipped Tundras, including the TRD Pro, using a 2-harness plug-and-play integration system.

Do you have to cut factory wires to upgrade the audio in a 2026 Tundra TRD Pro?

No. Taco Tunes systems for the 2026 Tundra TRD Pro use custom plug-and-play harnesses that connect to the factory plugs, so there is no cutting or splicing. The upgrade is fully reversible if you ever want to go back to stock.

Why do customers drive hours for a Taco Tunes install?

Because we build the parts specifically for Toyotas and install them without cutting factory wiring. Leo came 8 hours round trip; Erik came 14 from El Paso.

Posted on

“It Barely Makes Any Sound”: 2025 Hybrid Tundra JBL Subwoofer Upgrade

2025 Hybrid Tundra JBL subwoofer upgrade by Taco Tunes, photo 2 of 7

A huge thank you to Joe for bringing his 2025 JBL-equipped Hybrid Tundra to our shop! Joe was not happy with his factory JBL subwoofer. In his words, “It barely makes any sound.”

Vehicle2025 Toyota Tundra Hybrid JBL
PostedApril 2026
ShopTaco Tunes, San Antonio, TX

So we hooked him up with our 2022+ Tundra “STARTER” Add-A-Subwoofer kit, built to bring real low end to the Gen 3 Tundra without tearing into the truck.

A plug-and-play bass fix for the JBL Tundra

The Starter kit is a powered subwoofer system with a plug-and-play harness that taps into the JBL amplifier’s signals. It delivers a significant bass boost, installs without cutting factory wires, and is 100% reversible.

Tacotunes Starter Add-A-Subwoofer Kit (2022+ Tundra) includes

  • Enclosure: Tacotunes Hybrid PORTED powered subwoofer enclosure
  • Onboard amplifier: Tacotunes mono signal onboard amp, 350 watts RMS
  • Subwoofer: Tacotunes TT10, full-size 10″ subwoofer
  • Integration: plug-and-play harness that pulls signal from the factory JBL amplifier

Install photos

Frequently asked questions

Why is the factory JBL subwoofer in the 2025 Tundra so weak?

Many owners find the factory sub lacks output and depth. Adding a dedicated ported enclosure with its own 350-watt amplifier gives far more bass than the factory setup.

Do you have to cut factory wires to upgrade the audio in a 2025 Tundra?

No. Taco Tunes systems for the 2025 Tundra use custom plug-and-play harnesses that connect to the factory plugs, so there is no cutting or splicing. The upgrade is fully reversible if you ever want to go back to stock.

Can I install this in my 2022+ Tundra myself?

Yes. Taco Tunes products are designed for DIY installs: they bolt to factory mounting points and plug into factory harnesses. If you would rather have it installed, contact us and we can help you find an installer.

Posted on

2023 Hybrid Tundra JBL Powered Subwoofer Install: Starter Add-A-Sub Kit

2023 Hybrid Tundra JBL Powered Subwoofer Install by Taco Tunes, photo 2 of 10

A huge thank you to Jose for bringing his 2023 JBL-equipped Hybrid Tundra to our shop! Jose wanted to upgrade his factory JBL subwoofer, so we installed our 2022+ Tundra “STARTER” Add-A-Subwoofer kit.

Vehicle2023 Toyota Tundra Hybrid JBL
SystemStarter Add-A-Sub
PostedApril 2026
ShopTaco Tunes, San Antonio, TX

The Hybrid Tundra has less room to work with than the standard truck, which is why this kit uses our Hybrid ported enclosure, built to fit the Hybrid and still move plenty of air.

What makes the Starter kit a smart first upgrade

It is a powered subwoofer, so the amplifier is built in. A plug-and-play harness integrates with the JBL amplifier’s signals, and the whole system is 100% reversible. You get a significant bass boost while keeping the rest of the factory JBL system.

Tacotunes Starter Add-A-Subwoofer Kit (2022+ Tundra) includes

  • Enclosure: Tacotunes Hybrid PORTED powered subwoofer enclosure
  • Onboard amplifier: Tacotunes mono signal onboard amp, 350 watts RMS
  • Subwoofer: Tacotunes TT10, full-size 10″ subwoofer
  • Integration: plug-and-play harness that pulls signal from the factory JBL amplifier

Install photos

Frequently asked questions

Does the Starter kit fit the Hybrid Tundra?

Yes. It uses the Tacotunes Hybrid PORTED powered subwoofer enclosure, designed for JBL-equipped Hybrid Tundras like Jose’s 2023.

Do you have to cut factory wires to upgrade the audio in a 2023 Tundra?

No. Taco Tunes systems for the 2023 Tundra use custom plug-and-play harnesses that connect to the factory plugs, so there is no cutting or splicing. The upgrade is fully reversible if you ever want to go back to stock.

Can I install this in my 2022+ Tundra myself?

Yes. Taco Tunes products are designed for DIY installs: they bolt to factory mounting points and plug into factory harnesses. If you would rather have it installed, contact us and we can help you find an installer.