Posted on

2025 Toyota Tacoma Trailhunter Subwoofer Upgrade: Adding Real Bass With the Starter Kit

2025 Toyota Tacoma Trailhunter subwoofer upgrade by Taco Tunes, photo 1 of 3

A huge thank you to Matthew for bringing his 2025 Tacoma Trailhunter into our shop! Matthew was let down by his factory audio and ready to add some real bass, so we hooked him up with our 2024+ Tacoma “STARTER” Add-A-Subwoofer kit.

Vehicle2025 Toyota Tacoma Trailhunter (i-FORCE MAX)
PostedOctober 2026
ShopTaco Tunes, San Antonio, TX

Why the Tacoma Trailhunter is built for the backcountry

The Trailhunter is Toyota’s factory overlander: a 4th Gen Tacoma kitted out from the factory for remote travel, so owners can skip a lot of the aftermarket build list. It runs the i-FORCE MAX hybrid powertrain, a 2.4L turbo four paired with an electric motor for 326 hp and 465 lb-ft of torque, so there is plenty of low-end grunt for crawling and towing gear.

Underneath, Toyota teamed up with ARB to fit Old Man Emu 2.5″ forged monotube shocks with rear remote reservoirs, which add a little ride height and keep damping consistent on washboard roads. It also gets a high-mount air intake to pull cleaner, drier air when the trail turns dusty or wet, 33″ all-terrain tires on bronze 18″ wheels, frame-mounted rock rails, steel skid plates, a locking rear differential, an LED light bar in the grille and an onboard air compressor for airing back up after the trail.

Everything about the Trailhunter is dialed in for the dirt. The one thing a lot of owners still want more of is bass, and that is where we come in.

The easiest bass upgrade for a Tacoma Trailhunter

The Trailhunter comes from the factory with a 10-speaker JBL system, including a removable portable speaker. Our powered subwoofer uses a plug-and-play harness to integrate with the factory JBL amplifier’s signal, delivering a significant bass boost without touching the truck’s factory wiring. It is 100% reversible, so the Trailhunter stays exactly as Toyota built it underneath.

If you want to go further later, the Starter kit pairs naturally with our Volition system for door speakers and DSP.

Tacotunes 2024+ Tacoma Starter Add-A-Subwoofer Kit includes

  • Enclosure: Tacotunes PORTED powered subwoofer enclosure
  • Onboard amplifier: Tacotunes mono signal onboard amp, 350 watts RMS
  • Subwoofer: Tacotunes TT10, full-size 10″ subwoofer
  • Integration: plug-and-play harness that works with the factory JBL amplifier signal

Install photos

Frequently asked questions

What is the easiest way to add bass to a 2025 Tacoma Trailhunter?

A powered subwoofer with a plug-and-play harness, like the Taco Tunes Starter Add-A-Subwoofer kit, adds a ported 10″ sub and 350-watt amp without cutting factory wires.

Do you have to cut factory wires to upgrade the audio in a 2025 Tacoma?

No. Taco Tunes systems for the 2025 Tacoma use custom plug-and-play harnesses that connect to the factory plugs, so there is no cutting or splicing. The upgrade is fully reversible if you ever want to go back to stock.

Can I install this in my 2024+ Tacoma myself?

Yes. Taco Tunes products are designed for DIY installs: they bolt to factory mounting points and plug into factory harnesses. If you would rather have it installed, contact us and we can help you find an installer.

Does the Tacoma Trailhunter come with JBL audio?

Yes. The Trailhunter comes standard with a 10-speaker JBL system and a removable portable JBL speaker. Our Starter Add-A-Subwoofer kit plugs into the factory JBL amplifier signal, so you keep the factory head unit and features.

Posted on

2026 Tacoma Hybrid JBL Audio System Upgrade With Complete Sound Deadener

2026 Tacoma JBL Audio System Upgrade With Complete Sound Deadener by Taco Tunes, photo 1 of 13

We want to send a massive thank you to Kyle for coming out to our shop! Kyle was tired of the factory JBL audio system in his new 2026 Tacoma i-FORCE MAX Hybrid, so we set him up with our complete JBL Tacoma Audio System alongside complete sound deadener.

Vehicle2026 Toyota Tacoma i-FORCE MAX Hybrid, JBL
PostedSeptember 2026
ShopTaco Tunes, San Antonio, TX

Plug-and-play JBL integration

Our 100% plug-and-play solution gives a factory-grade fit with zero modifications to your OEM harnesses. By capturing a clean, unmodified signal before it reaches the factory amp, our JBL integration system gives your new amplifier a flat, high-quality signal. That means crystal-clear highs, well-defined mids and powerful bass, with zero changes to your factory wiring.

Hybrid vs. non-hybrid Tacoma: why the subwoofer goes behind the seat

Kyle’s Tacoma has the i-FORCE MAX hybrid powertrain, a 2.4L turbo four paired with an electric motor for 326 hp and 465 lb-ft of torque. That extra power comes with one packaging change that matters for audio: the hybrid battery pack sits under the rear seat.

  • Hybrid (i-FORCE MAX): the space under the rear seat is taken by the battery pack, so the subwoofer enclosure has to mount behind the rear seat, against the back wall of the cab. Our hybrid enclosure is shaped for that spot, so it fits tight without blocking the battery’s cooling airflow or eating into your cabin.
  • Non-hybrid (i-FORCE 2.4L turbo): there is no battery pack under the seat, so that area stays open and there are more mounting options for the subwoofer and amplifier.

Because the two trucks package differently, the parts are not interchangeable. When you order, tell us whether your Tacoma is a hybrid and whether it has the JBL system, and we will make sure you get the right enclosure and harnesses. Not sure? Look for the i-FORCE MAX badge, or contact Taco Tunes support with your VIN.

The 2024+ Tacoma JBL System 1 includes

  • 2024+ JBL Tacoma Factory Integration System: 2-harness plug-and-play system, no cutting or splicing factory wires
  • Front doors: Tacotunes.com TT65CS component speakers: TT65 mid-bass drivers (100 watts RMS), TT65 crossovers, TT65 tweeters in clip-in mounts at the factory A-pillar location, front door speaker mounts, front door harness adapters
  • Dash: 3.5″ dash replacement speakers with Tacotunes.com dash speaker harness adapters
  • Rear doors: ID65 coaxial speakers (100 watts RMS) on heavy-duty 5.6″ mounts with speaker harness adapters
  • Amplification: tacotunes.com TXD20005v2 five-channel amplifier, 100 watts x 4 to the speakers and 800 watts x 1 to the subwoofer
  • Amp rack: laser-cut rack that bolts to the factory mounting location
  • Subwoofer: Tacotunes single 10 subwoofer enclosure with a TacoTunes TT10V4 full-size 10″ subwoofer (500 watts RMS)

Install photos

Frequently asked questions

Do you have to replace the JBL amplifier in a 2026 Tacoma?

No. The JBL integration system captures the signal before it reaches the factory amp and feeds it to the new Taco Tunes amplifier, using two plug-and-play harnesses.

Do you have to cut factory wires to upgrade the audio in a 2026 Tacoma?

No. Taco Tunes systems for the 2026 Tacoma use custom plug-and-play harnesses that connect to the factory plugs, so there is no cutting or splicing. The upgrade is fully reversible if you ever want to go back to stock.

Can I install this in my 2024+ Tacoma myself?

Yes. Taco Tunes products are designed for DIY installs: they bolt to factory mounting points and plug into factory harnesses. If you would rather have it installed, contact us and we can help you find an installer.

Where does the subwoofer go in a hybrid 2026 Tacoma?

Behind the rear seat. The i-FORCE MAX hybrid battery pack sits under the rear seat, so Taco Tunes uses a hybrid-specific enclosure that mounts against the back wall of the cab. Non-hybrid Tacomas do not have the battery there, which leaves more mounting options.

Posted on

Mudbath Monday: Two 2026 Tacoma TRD Off-Roads Get the Volition Sound Upgrade

2026 Toyota Tacoma TRD Off-Road Volition audio install by Taco Tunes, photo 1 of 13

It was Mudbath Monday at Taco Tunes, and we doubled down in the shop! Two 2026 Toyota Tacoma TRD Off-Roads hit the bays for the ultimate sound overhaul:

Vehicle2026 Toyota Tacoma
SystemVolition
PostedAugust 2026
ShopTaco Tunes, San Antonio, TX
  • Truck 1: Hybrid with the factory JBL system
  • Truck 2: non-Hybrid with ANC-equipped base audio

Both trucks got our complete sound-matting treatment and the Volition Audio System. The full breakdown video is on our Facebook page.

Factory fit. Audiophile performance. Zero splicing.

Stop letting shops drill holes in your floor pans or butcher your factory wiring. Our true plug-and-play setup integrates with the Tacoma’s OEM harness and protects your electrical system.

  • ReCurve EVO DSP: mounts under the driver’s seat and pulls signal directly from the head unit, custom-tuned for sharp staging
  • Precision amp rack: laser-cut to bolt into factory locations
  • Built for the Tacoma: custom mounts and exact-match connectors throughout

The 2024+ Tacoma Volition Audio System includes

  • 2024+ Tacoma Factory Integration System: plug-and-play harness system, no cutting or splicing factory wires
  • Signal processing: ReCurve EVO DSP, a direct-fit unit under the driver’s seat that takes signal straight from the head unit and is custom-tuned for the listener
  • Front doors: Tacotunes.com TT65CS component speakers: TT65 mid-bass drivers (100 watts RMS), TT65 crossovers, TT65 tweeters in the factory dash location, heavy-duty 5.6″ mounts, front door harness adapters
  • Rear doors: ID65 coaxial speakers (100 watts RMS) on 5.6″ mounts with speaker harness adapters
  • Amplification: tacotunes.com TXD20005v2 five-channel amplifier, 125 watts x 4 to the doors and 500 watts x 1 to the subwoofer
  • Amp rack: laser-cut rack that bolts to the factory mounting location
  • Subwoofer: Tacotunes single 10 subwoofer enclosure with a TacoTunes TT10V4 full-size 10″ subwoofer (500 watts RMS)

Install photos

Frequently asked questions

Does Volition work with both JBL and base audio 2026 Tacomas?

Yes. In this shoot one truck was a Hybrid with factory JBL and the other a non-Hybrid with ANC-equipped base audio, and both got the Volition system.

Will a sound upgrade affect the ANC in a base-audio Tacoma?

This non-Hybrid TRD Off-Road had ANC-equipped base audio and received the full Volition upgrade. Contact us about your specific truck before you order.

Do you have to cut factory wires to upgrade the audio in a 2026 Tacoma?

No. Taco Tunes systems for the 2026 Tacoma use custom plug-and-play harnesses that connect to the factory plugs, so there is no cutting or splicing. The upgrade is fully reversible if you ever want to go back to stock.