Posted on

2024 Toyota Tacoma TRD Pro JBL Subwoofer Upgrade: Starter Powered Sub for Glen

Glen's black 2024 Toyota Tacoma TRD Pro with JBL audio parked on the beach next to a red Suzuki Hayabusa

We get so busy installing that we often forget or have no time to grab photos of the trucks before they roll out! A big thank you to Glen for sending us these shots of his 2024 Toyota Tacoma TRD Pro. Glen is a local San Antonio customer who wanted more bass out of his TRD Pro’s JBL system, so we installed our 2024 Tacoma TRD Pro subwoofer upgrade, the 2024+ Tacoma “STARTER” Add-A-Subwoofer kit. He left a happy camper!

Vehicle2024 Toyota Tacoma TRD Pro
BodyDouble Cab, Short Bed
Factory audioJBL
System2024+ Tacoma Starter Powered Subwoofer Kit
CustomerGlen, local San Antonio install
PostedNovember 2026
ShopTaco Tunes, San Antonio, TX

More bass for a JBL 2024 Tacoma TRD Pro

The factory JBL system in the TRD Pro sounds clean, but it runs out of low end fast. Our Starter powered subwoofer plugs into the JBL amplifier’s signals with a plug-and-play harness and adds a ported 10″ sub with its own 350-watt amp. No cutting or splicing of factory wires, and it is 100% reversible.

Glen’s TRD Pro is basically the same truck and setup as Manuel’s 2026 Tacoma TRD Pro Starter sub install, so if you want to see more of the install itself, check that post out too. You can find thousands more Tacoma upgrades in our Tacoma install gallery and on our Facebook page.

What is in the 2024+ Tacoma Starter Add-A-Subwoofer kit

  • Enclosure: Tacotunes PORTED powered subwoofer enclosure that fits behind the rear seat
  • Onboard amplifier: Tacotunes mono signal onboard amp, 350 watts RMS
  • Subwoofer: Tacotunes TT10, full-size 10″ subwoofer
  • Integration: plug-and-play harness for the factory JBL amplifier signals

Photos

Frequently asked questions

Will a powered subwoofer work with the JBL system in a 2024 Tacoma TRD Pro?

Yes. The Starter kit’s plug-and-play harness connects to the JBL amplifier’s signals in the 2024+ Tacoma, so you keep the factory head unit and JBL speakers and add real bass.

Where does the subwoofer go in a Tacoma Double Cab?

The ported enclosure fits behind the rear seat and bolts to factory mounting points, so you keep your bed and cab storage.

Is the Starter powered sub reversible?

Yes. There is no cutting or splicing of factory wiring, so it can go back to stock any time.

Can you install it at your San Antonio shop?

Yes. Glen is a local customer and we did his install in our shop. Contact us to schedule, or install it yourself: the kit is designed for DIY installs.

Posted on

2024 Toyota Tacoma TRD Sport Non-JBL Powered Subwoofer Upgrade for Ryan

Ryan with his black 2024 Toyota Tacoma TRD Sport Double Cab at the Taco Tunes shop in San Antonio

A HUGE thank you to Ryan for bringing his awesome 2024 Toyota Tacoma TRD Sport into our shop! Ryan was ready to leave his factory audio behind, starting with REAL bass now and speakers later, so we set him up with our 2024 Tacoma powered subwoofer, the 2024+ Tacoma “STARTER” Add-A-Subwoofer kit.

Vehicle2024 Toyota Tacoma TRD Sport
BodyDouble Cab, Short Bed
Factory audioNon-JBL, ANC equipped
System2024+ Tacoma Starter Powered Subwoofer Kit
PostedNovember 2026
ShopTaco Tunes, San Antonio, TX

A 2024 Tacoma powered subwoofer for a non-JBL TRD Sport

This powered subwoofer system uses a plug-and-play harness to integrate seamlessly with the factory audio in Ryan’s non-JBL, ANC-equipped Tacoma, delivering a significant bass boost. It is an easy, 100% reversible, plug-and-play audio upgrade with no cutting or splicing of factory wires.

Starting with bass also sets Ryan up for an easy speaker upgrade whenever he decides to take the next step. Curious to see more? You will find thousands of photos and videos of Tacoma upgrades we have completed for private owners and Toyota dealers in our Tacoma install gallery and on our Facebook page.

Tacotunes 2024+ Tacoma Starter Add-A-Subwoofer Kit includes

  • Enclosure: Tacotunes PORTED powered subwoofer enclosure
  • Onboard amplifier: Tacotunes mono signal onboard amp, 350 watts RMS
  • Subwoofer: Tacotunes TT10, full-size 10″ subwoofer
  • Integration: plug-and-play harness that connects to the factory audio signals

Install photos

Frequently asked questions

Does the Starter powered subwoofer work in a non-JBL 2024 Tacoma?

Yes. The kit’s plug-and-play harness connects to the factory non-JBL audio in the 2024+ Tacoma, including ANC-equipped trucks like Ryan’s TRD Sport.

Can I upgrade my speakers later?

Yes. The Starter kit is a first step. You can add Taco Tunes speakers and an amplifier later without removing the subwoofer.

Is the powered subwoofer upgrade reversible?

Yes. It plugs into the factory harness with no cutting or splicing, so it is 100% reversible if you ever want to go back to stock.

Can I install this in my 2024+ Tacoma myself?

Yes. Taco Tunes products are designed for DIY installs: they bolt to factory mounting points and plug into factory harnesses. If you would rather have it installed, contact us and we can help you find an installer.

Posted on

Back After 10 Years: 2024 Tacoma Volition Full Audio Upgrade + Sound Dampening

2024 Toyota Tacoma Volition audio system install by Taco Tunes, photo 1 of 15

A massive thank you to Juan M. Pardo for coming back to see us after 10 years!

Vehicle2024 Toyota Tacoma
SystemVolition
PostedAugust 2026
ShopTaco Tunes, San Antonio, TX

A decade ago we installed a full audio system in Juan’s 2015 Toyota Tundra. This time he brought us his son’s 2024 Toyota Tacoma for the complete audio treatment.

Juan’s build

Juan chose our 2024+ Toyota Tacoma Volition System, a fully customizable package that lets customers pick their upgrade path. He went with the full system upgrade plus complete vehicle sound dampening (matting).

How Volition captures a clean signal

Our 100% plug-and-play setup gives a factory-grade fit with zero modifications to OEM harnesses. It is powered by the ReCurve EVO DSP, a direct-fit unit under the driver’s seat that captures audio straight from the head unit without cutting or splicing a single wire. Then the DSP is custom-tuned for the listener.

The 2024+ Tacoma Volition Audio System includes

  • 2024+ Tacoma Factory Integration System: plug-and-play harness system, no cutting or splicing factory wires
  • Signal processing: ReCurve EVO DSP, a direct-fit unit under the driver’s seat that takes signal straight from the head unit and is custom-tuned for the listener
  • Front doors: Tacotunes.com TT65CS component speakers: TT65 mid-bass drivers (100 watts RMS), TT65 crossovers, TT65 tweeters in the factory dash location, heavy-duty 5.6″ mounts, front door harness adapters
  • Rear doors: ID65 coaxial speakers (100 watts RMS) on 5.6″ mounts with speaker harness adapters
  • Amplification: tacotunes.com TXD20005v2 five-channel amplifier, 125 watts x 4 to the doors and 500 watts x 1 to the subwoofer
  • Amp rack: laser-cut rack that bolts to the factory mounting location
  • Subwoofer: Tacotunes single 10 subwoofer enclosure with a TacoTunes TT10V4 full-size 10″ subwoofer (500 watts RMS)

Install photos

Frequently asked questions

What does the DSP do in the Tacoma Volition system?

The ReCurve EVO DSP takes the signal directly from the head unit and is custom-tuned for the listener, so the speakers and subwoofer are dialed in for your truck.

Is sound dampening worth it in a 2024 Tacoma?

Matting the doors and cab reduces rattles and road noise, so the new speakers sound cleaner and the bass is tighter.

Do you have to cut factory wires to upgrade the audio in a 2024 Tacoma?

No. Taco Tunes systems for the 2024 Tacoma use custom plug-and-play harnesses that connect to the factory plugs, so there is no cutting or splicing. The upgrade is fully reversible if you ever want to go back to stock.

Posted on

Meet Volition: The Upgradeable 2024-2027 Toyota Tacoma Audio System

2024+-TOYOTA-TACOMA-PLUG-AND-PLAY-SOUND-SYSTEM-UPGRADE-INSTALLATION-KIT

Meet Volition: the Toyota Tacoma audio system built to move at your speed.

Vehicle2024-2027 Toyota Tacoma
SystemVolition
PostedAugust 2026
ShopTaco Tunes, San Antonio, TX

Why settle for all-or-nothing? Most Tacoma owners start with a killer subwoofer upgrade and swap their door speakers later. Volition gives you the power to build your dream sound on your schedule. It is upgradeable, flexible and engineered for the road ahead.

Who Volition is for

Volition fits 2024-2027 Toyota Tacoma Double Cab trucks (4th Gen). Start with the Base kit and add door speakers later, or go straight to the Complete kit. Either way, it is the same plug-and-play foundation.

See it in real trucks: Ruben’s 2026 Tacoma started with the Base kit and came back for door speakers, Emma’s 2026 Tacoma got the Complete kit with sound deadener, and Juan’s son’s 2024 Tacoma got the full system.

The 2024+ Tacoma Volition Audio System includes

  • 2024+ Tacoma Factory Integration System: plug-and-play harness system, no cutting or splicing factory wires
  • Signal processing: ReCurve EVO DSP, a direct-fit unit under the driver’s seat that takes signal straight from the head unit and is custom-tuned for the listener
  • Front doors: Tacotunes.com TT65CS component speakers: TT65 mid-bass drivers (100 watts RMS), TT65 crossovers, TT65 tweeters in the factory dash location, heavy-duty 5.6″ mounts, front door harness adapters
  • Rear doors: ID65 coaxial speakers (100 watts RMS) on 5.6″ mounts with speaker harness adapters
  • Amplification: tacotunes.com TXD20005v2 five-channel amplifier, 125 watts x 4 to the doors and 500 watts x 1 to the subwoofer
  • Amp rack: laser-cut rack that bolts to the factory mounting location
  • Subwoofer: Tacotunes single 10 subwoofer enclosure with a TacoTunes TT10V4 full-size 10″ subwoofer (500 watts RMS)

Frequently asked questions

Can I upgrade my 2024 Tacoma audio in stages?

Yes. That is the idea behind Volition: start with the subwoofer and amplifier, then add door speakers when you are ready.

Which Tacomas does Volition fit?

2024-2027 Toyota Tacoma Double Cab trucks.

Do you have to cut factory wires to upgrade the audio in a 4th Gen Tacoma?

No. Taco Tunes systems for the 4th Gen Tacoma use custom plug-and-play harnesses that connect to the factory plugs, so there is no cutting or splicing. The upgrade is fully reversible if you ever want to go back to stock.

Posted on

2024 Tacoma Limited JBL Audio Upgrade: Complete System 1 Install

2024 Tacoma Limited JBL Audio Upgrade by Taco Tunes, photo 1 of 11

We want to send a massive thank you to Evelyn for coming out to our shop again! Evelyn and her husband are longtime customers, and she was tired of the factory JBL audio system in her new 2024 Tacoma Limited.

Vehicle2024 Toyota Tacoma Limited JBL
SystemSystem 1
PostedJune 2026
ShopTaco Tunes, San Antonio, TX

So we set her up with our complete JBL Tacoma Audio System 1.

Plug-and-play JBL integration for the 4th Gen Tacoma

Our 100% plug-and-play solution gives a factory-grade fit with zero modifications to your OEM harnesses, so your truck’s electrical system stays intact. It captures a clean, unmodified signal before it reaches the factory amp, giving the new amplifier a flat, high-quality signal to work with.

The result is crystal-clear highs, well-defined mids and powerful bass, with zero changes to your factory wiring.

The 2024+ Tacoma JBL System 1 includes

  • 2024+ JBL Tacoma Factory Integration System: 2-harness plug-and-play system, no cutting or splicing factory wires
  • Front doors: Tacotunes.com TT65CS component speakers: TT65 mid-bass drivers (100 watts RMS), TT65 crossovers, TT65 tweeters in clip-in mounts at the factory A-pillar location, front door speaker mounts, front door harness adapters
  • Dash: 3.5″ dash replacement speakers with Tacotunes.com dash speaker harness adapters
  • Rear doors: ID65 coaxial speakers (100 watts RMS) on heavy-duty 5.6″ mounts with speaker harness adapters
  • Amplification: tacotunes.com TXD20005v2 five-channel amplifier, 100 watts x 4 to the speakers and 800 watts x 1 to the subwoofer
  • Amp rack: laser-cut rack that bolts to the factory mounting location
  • Subwoofer: Tacotunes single 10 subwoofer enclosure with a TacoTunes TT10V4 full-size 10″ subwoofer (500 watts RMS)

Install photos

Frequently asked questions

Can you upgrade the JBL system in a 2024 Tacoma Limited?

Yes. The 2024+ JBL Tacoma Factory Integration System uses two plug-and-play harnesses, so the full System 1 installs without cutting or splicing.

Do you have to cut factory wires to upgrade the audio in a 2024 Tacoma?

No. Taco Tunes systems for the 2024 Tacoma use custom plug-and-play harnesses that connect to the factory plugs, so there is no cutting or splicing. The upgrade is fully reversible if you ever want to go back to stock.

Can I install this in my 2024+ Tacoma myself?

Yes. Taco Tunes products are designed for DIY installs: they bolt to factory mounting points and plug into factory harnesses. If you would rather have it installed, contact us and we can help you find an installer.

Posted on

2024+ Tacoma Subwoofer Battle: Blind Bass Test at Red McCombs Toyota

2024+ Toyota Tacoma Subwoofer Box Launch by Taco Tunes, photo 1 of 1

We believe decibels and soul-shaking clarity win battles, not marketing jargon. So we took the 2024+ Toyota Tacoma bass showdown to the streets: local Toyota dealerships and audio shops, in a double-blind comparison.

Vehicle2024+ Toyota Tacoma
PostedMay 2026
ShopTaco Tunes, San Antonio, TX

Listeners did not know which enclosure was in which truck. The goal was total objectivity and zero brand bias, just raw, unfiltered feedback.

Round 1: Red McCombs Toyota

We took the showdown to Red McCombs Toyota, grabbed volunteers to step into the hot seat, and had them experience the impact of each subwoofer setup and give us their gut-level feedback. The video on our Facebook page shows which box claimed the throne and what the testers said. Round 2 is coming.

Equipment both trucks shared

Both test trucks were 2024 Tacomas with base (non-JBL) audio, matched as closely as possible:

  • Amplification: Tacotunes TXD20005v2 5-channel amplifier: 125 x 4 @ 4 ohm (speakers), 500W @ 2 ohm / 1000W @ 1 ohm (sub)
  • Processing: Tacotunes 6-channel DSP with 31-band EQ, time alignment and active crossovers
  • Calibration: power output and frequency response matched on both trucks, except the subsonic filter settings

What was different

  • Orange Tacoma: tacotunes.com 2-way components (100W RMS), tacotunes.com TT10 D4 10″ sub in the Taco Tunes ported enclosure (fits behind the seats, Hybrid and non-Hybrid), 28Hz subsonic filter
  • Bronze Tacoma: tacotunes.com 3-way components (125W RMS), JL Audio TW3 D4 10″ sub in an under-seat sealed enclosure (fits under the rear seats, non-Hybrid only), 20Hz subsonic filter

Frequently asked questions

What is the best subwoofer box for a 2024 Tacoma?

It depends on your truck and taste. In our blind test, the Taco Tunes ported box fits both Hybrid and non-Hybrid trucks behind the seats, while the competing under-seat sealed box fits non-Hybrid trucks only. Watch the video and judge for yourself.

Does an under-seat sub box fit the 2024 Tacoma Hybrid?

The under-seat sealed enclosure in this test fits non-Hybrid trucks only. The Taco Tunes ported enclosure fits both Hybrid and non-Hybrid.

Why use a double-blind test?

So listeners cannot be swayed by brand names. They hear both trucks without knowing which box is in which.

Posted on

2024 Toyota Tacoma Audio Upgrade With Our Second R&D Subwoofer Enclosure

David was all smiles after hearing his new system! - 2024 Tacoma subwoofer enclosure

2024 Tacoma – Audio System Upgrade

Vehicle2024 Toyota Tacoma
PostedAugust 2024
ShopTaco Tunes, San Antonio, TX

A HUGE Thank you to David for making his way out to our shop!

David was disappointed with the factory audio in his 2024 Tacoma.

So… We got him set up with our complete speaker upgrade and our SECOND R&D Subwoofer enclosure for the 2024 Tacoma’s! Keep checking back for our completed subwoofer enclosure! It looks like we will be able to fit a 10” subwoofer!

How the Taco Tunes system installs

Our Tacoma Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results!

Our complete system is plug and play completely reversible ( ZERO cutting and splicing of stock wires) AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.

Our audio system will work with your stock stereo and most aftermarket head units.

tacotunes.com System

  • Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com speaker mounts TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters
  • Rear Door Components: ID65 coaxial speakers; Tweeters mounted in stock location.
  • Amp: tacotunes.com TXD10005 5 channel amplifier; 75 watts to each door speaker & 350 watts (RMS) to your subwoofer
  • Subwoofer(s): Subwoofer Box & Subwoofer

Install photos

Frequently asked questions

Can you upgrade the audio in a 2024 Toyota Tacoma?

Yes. We developed complete speaker, amplifier and subwoofer systems for the 4th Gen 2024+ Tacoma, including i-FORCE MAX hybrid trucks, using plug-and-play wiring and factory mounting points.

Is the Taco Tunes Tacoma system plug and play?

Yes. Our Tacoma Direct Integration System uses custom harnesses built for the Tacoma, bolts to factory mounting locations and is completely reversible, with zero cutting or splicing of factory wires.

Can I install a Taco Tunes system myself?

Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.

Posted on

2024 Toyota Tacoma Speaker and Amplifier Upgrade With Stand-Alone Sub

This Color POPS!!! - 2024 Tacoma speaker upgrade

2024 Tacoma Audio System Upgrade

Vehicle2024 Toyota Tacoma
PostedJuly 2024
ShopTaco Tunes, San Antonio, TX

We installed a complete speaker & amplifier system upgrade with a stand alone subwoofer, in this 2024 Tacoma.

Keep checking back for our completed subwoofer enclosure! It looks like we will be able to fit a 10” subwoofer behind the rear seat!

How the Taco Tunes system installs

Our Tacoma Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results!

Our complete system is plug and play completely reversible ( ZERO cutting and splicing of stock wires) AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.

Our audio system will work with your stock stereo and most aftermarket head units.

tacotunes.com System

  • Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com speaker mounts TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters
  • Rear Door Components: ID65 coaxial speakers; Tweeters mounted in stock location.
  • Amp: tacotunes.com TXD10005 5 channel amplifier; 75 watts to each door speaker & 350 watts (RMS) to your subwoofer

Install photos

Frequently asked questions

Can you upgrade the audio in a 2024 Toyota Tacoma?

Yes. We developed complete speaker, amplifier and subwoofer systems for the 4th Gen 2024+ Tacoma, including i-FORCE MAX hybrid trucks, using plug-and-play wiring and factory mounting points.

Is the Taco Tunes Tacoma system plug and play?

Yes. Our Tacoma Direct Integration System uses custom harnesses built for the Tacoma, bolts to factory mounting locations and is completely reversible, with zero cutting or splicing of factory wires.

Can I install a Taco Tunes system myself?

Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.

Posted on

2024 Tacoma i-FORCE MAX Audio Upgrade: Our First Hybrid Tacoma System

2024 Toyota tacoma iForce Max - 2024 Tacoma audio upgrade

2024 Tacoma IFORCE MAX Audio System Upgrade

Vehicle2024 Toyota Tacoma Hybrid i-FORCE MAX
PostedJuly 2024
ShopTaco Tunes, San Antonio, TX

This 2024 TRD Sport Tacoma came to us RIGHT OFF THE LOT of Red McCombs Toyota & RMT Customs

The new owners of this 2024 Tacoma could NOT stand the OEM speakers… Their first order of business was to get their new ride in our hands!

So… We got them set up with our FIRST complete audio system in the 2024 IFORCE MAX (Hybrid) Tacoma. Keep checking back for our completed subwoofer enclosure! It looks like we will be able to fit a 10” subwoofer!

How the Taco Tunes system installs

Our Tacoma Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results!

Our complete system is plug and play completely reversible ( ZERO cutting and splicing of stock wires) AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.

Our audio system will work with your stock stereo and most aftermarket head units.

tacotunes.com System

  • Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com speaker mounts TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters
  • Rear Door Components: ID65 coaxial speakers; Tweeters mounted in stock location.
  • Amp: tacotunes.com TXD10005 5 channel amplifier; 75 watts to each door speaker & 350 watts (RMS) to your subwoofer
  • Subwoofer(s): Subwoofer Box & Subwoofer; TacoTune’s FIRST 2024 Hybrid Tacoma R&D Subwoofer enclosure – This enclosure fit a single 8 inch subwoofer. Keep checking back for our completed enclosure… Looks like we will be able to fit a 10″ subwoofer!

Install photos

Frequently asked questions

Can you upgrade the audio in a 2024 Toyota Tacoma?

Yes. We developed complete speaker, amplifier and subwoofer systems for the 4th Gen 2024+ Tacoma, including i-FORCE MAX hybrid trucks, using plug-and-play wiring and factory mounting points.

Is the Taco Tunes Tacoma system plug and play?

Yes. Our Tacoma Direct Integration System uses custom harnesses built for the Tacoma, bolts to factory mounting locations and is completely reversible, with zero cutting or splicing of factory wires.

Can I install a Taco Tunes system myself?

Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.