We extend a big thank you to Enrique for visiting our shop with his 2024 NON-HYBRID Tundra!
| Vehicle | 2024 Toyota Tundra |
| Posted | May 2025 |
| Shop | Taco Tunes, San Antonio, TX |
Enrique came to us with a previously installed subwoofer system in his tundra. Unfortunately, the previous installers spliced is factory wires and the bass output from his previous subwoofer system did not meet his expectations.
He was looking to significantly upgrade his audio, specifically wanting his speakers LOUD and also wanting 12-inch subwoofers to enhance the factory JBL system.
Since he lives around the corner, Enrique agreed to be our “Test Subject”, and we asked him to choose between our TT10” subwoofers, or shallow mount 12” subwoofers.
So… with a little extra time, We custom-installed our “upgraded” System 1b for him, which included 150 watts to each door speaker (our regular system 1b is 100watts x4) and two 12-inch shallow mount subwoofers, expertly fitted into our HYBRID Tundra subwoofer enclosure.
Enrique called us back stating the 12-inch shallow mount subwoofers lacked the depth he desired. He came back to swap over to our TT10 full-size subwoofers, and the difference was clear: he left thrilled by the richer, more immersive audio experience.
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
- 2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
- JBL Tundra Component Speaker package: CXS64 Mid bass Drivers -150 Watts RMS; CXS64 Crossovers; CXS64 Tweeters; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com speaker mounts cut to 5.6”; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers x3; Tacotunes.com Dash Speaker Wire Harness Adapters
- TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
- Amps: 150 watts RMS x4 – four channel amplifier; tacotunes.com TXD1000.1 – Mono subwoofer amplifier; 150 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
- Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes Dual 10 HYBRID Subwoofer Enclosure; Tacotunes.com Dual 10″ subwoofers; TacoTunes TT10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800)
Install photos














Frequently asked questions
Are shallow-mount 12″ subs better than full-size 10″ subs in a Tundra?
Not in our experience. Enrique tried two 12″ shallow-mount subs first, but they lacked depth. After switching to our full-size TT10 10″ subwoofers, he got richer, deeper bass.
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Why shouldn’t an audio shop splice my Tundra’s factory wiring?
Cutting or splicing factory wiring can damage JBL components and create problems that are expensive to repair. We repair a large number of JBL-equipped Toyotas for this reason, and there is no need to cut anything with plug-and-play harnesses.