2024 Hybrid Tundra JBL System 1B With Complete Sound Deadener Matting
A HUGE thank you to Troy for making the trip out to our shop from Houston, Texas…. A 6 hour round trip!!!
Vehicle
2024 Toyota Tundra Hybrid JBL
System
System 1B
Posted
April 2025
Shop
Taco Tunes, San Antonio, TX
Troy could not tolerate the factory audio in his 2024 HYBRID Tundra. So… We got him set up with our 2022+ JBL Hybrid Tundra system 1B, along with COMPLETE sound deadener matting!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD1000.1 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Tacotunes hybrid subwoofer enclosure installedOur amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!Tacotunes Hybrid Tundra Dual subwoofer enclosure includes two 10” subwoofers in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Tacotunes JBL tundra front door crossover network is mounted to the amp rack on your rear wall. The crossover network is responsible for directing the proper frequency to the new tweeters in the A-Pillar and the mid bass drivers in the front door. Don’t settle for low end OEM style or coaxial speakers.Tacotunes.com TT65cs direct fit silk dome tweeters produce the crisp, clear highs that that perform amazingly well at all listening levels. These tweeters are part of a true component speaker system that connects to the included crossover network.Bass knob installed in factory location. Allowing you to adjust your subwoofers to your liking!Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersTacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.The JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth.and 100% plug and play. Requiring ZERO cutting or splicing of your factory wiring.The pre-amp audio signal is routed to the AVC/LAN interface module then provides that clean flat signal directly to the TXD3204 (4 Channel) & TXD10001 (subwoofer amp). The amps then provide the amplified signal to your speakers via the plug and play speaker harness integration system. There is no need to run new speaker wire. NO cutting or splicing ANY of your factory wires. The system is completely reversible.Plug & Play Harness Connections.Direct tundra integration… Keep your Factory Stereo (JBL Head Unit) and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.
Frequently asked questions
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Is there a subwoofer box that fits the Hybrid Tundra?
Yes. Our Hybrid Tundra subwoofer enclosures are custom molded to fit behind the rear seat of the 2022+ Hybrid Tundra while keeping your under-seat storage.
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.