Posted on

2022 Toyota Tundra CrewMax System 1B for Fernando

Fernando's 2022 Toyota Tundra CrewMax Army Green. - 2022 Tundra CrewMax speakers
Vehicle2022 Toyota Tundra CrewMax
SystemSystem 1B
PostedApril 2022
ShopTaco Tunes, San Antonio, TX
  • Big thank you to Fernando for letting us install our System 1B into his 2022 Toyota Tundra CM.
  • The system 1B that includes the following
  • 2022 Tundra Factory Integration System
  • 3 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
  • NTUNE6 – LOC / Audio leveler & Bass Enhancement module
  • Front Door Component Speakers
  • Tacotunes.com TT65CS Component Speakers
  • Tacotunes.com heavy duty speaker mounts cut to 5.6”
  • TT65 Mid bass Drivers -100 Watts RMS
  • TT65 Crossover
  • TT65 Tweeter
  • Tacotunes.com Front Door Speaker Wire Harness Adapters
  • Tacotunes.com Dash Speaker Wire Harness Adapters
  • Tweeters Installed in dash location using tweeter adapters.
  • Rear Door Components
  • Tacotunes.com TT65CS Component Speakers
  • Tacotunes.com heavy duty speaker mounts cut to 5.6”
  • TT65 Mid bass drivers Handles -100 watts RMS
  • TT65 Crossover
  • TT65 Tweeter
  • Tacotunes.com Tweeter Harness Adatpers
  • Tweeters will fit in stock door location
  • Amps
  • tacotunes.com TXD3204v3 Four channel amplifier
  • tacotunes.com TXD10001 Mono subwoofer amplifier
  • 100 watts x 4 to each speaker and 800 x 1 (subwoofers)
  • Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
  • Subwoofer(s)
  • Subwoofer Box & Subwoofers
  • Tacotunes.com Dual 10″ subwoofers
  • Image Dynamics ID10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800)
  • NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!

Install photos

Frequently asked questions

What does the NTUNE6 do in a Tundra?

The NTUNE6 is a line output converter, audio leveler and bass enhancement module. It lets you keep your stock stereo and add aftermarket amplifiers while flattening the factory signal.

Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?

No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.

Can I install a Taco Tunes system myself?

Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.

Posted on

2022 Toyota Tundra CrewMax System 1B for Tristan

2022 Toyota Tundra CrewMax - Midnight Black - 2022 Tundra subwoofer system
Vehicle2022 Toyota Tundra CrewMax
SystemSystem 1B
PostedApril 2022
ShopTaco Tunes, San Antonio, TX
  • Big thank you to Tristan for letting us install our System 1B into his 2022 Toyota Tundra CM.
  • The system 1B that includes the following
  • 2022 Tundra Factory Integration System
  • 3 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
  • NTUNE6 – LOC / Audio leveler & Bass Enhancement module
  • Front Door Component Speakers
  • Tacotunes.com TT65CS Component Speakers
  • Tacotunes.com heavy duty speaker mounts cut to 5.6”
  • TT65 Mid bass Drivers -100 Watts RMS
  • TT65 Crossover
  • TT65 Tweeter
  • Tacotunes.com Front Door Speaker Wire Harness Adapters
  • Tacotunes.com Dash Speaker Wire Harness Adapters
  • Tweeters Installed in dash location using tweeter adapters.
  • Rear Door Components
  • Tacotunes.com TT65CS Component Speakers
  • Tacotunes.com heavy duty speaker mounts cut to 5.6”
  • TT65 Mid bass drivers Handles -100 watts RMS
  • TT65 Crossover
  • TT65 Tweeter
  • Tacotunes.com Tweeter Harness Adatpers
  • Tweeters will fit in stock door location
  • Amps
  • tacotunes.com TXD3204v3 Four channel amplifier
  • tacotunes.com TXD10001 Mono subwoofer amplifier
  • 100 watts x 4 to each speaker and 800 x 1 (subwoofers)
  • Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
  • Subwoofer(s)
  • Subwoofer Box & Subwoofers
  • Tacotunes.com Dual 10″ subwoofers
  • Image Dynamics ID10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800)
  • NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!

Install photos

Frequently asked questions

What does the NTUNE6 do in a Tundra?

The NTUNE6 is a line output converter, audio leveler and bass enhancement module. It lets you keep your stock stereo and add aftermarket amplifiers while flattening the factory signal.

Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?

No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.

Ported or sealed: which subwoofer box is best for a truck?

When space and budget allow, nearly all of our customers choose a ported box. A well-designed ported enclosure with plenty of air space gives deeper, louder bass than a shallow-mount sub, especially at lower volumes.

Posted on

2022 Toyota Tundra CrewMax Stereo System Upgrade Component Speakers & Subwoofers Amplifiers – Plug and Play

Tristan Loving his new system! - 2022 Tundra subwoofer system

Huge thank you to Tristan for allowing us to install a System 1B into his 2022 Toyota Tundra. Tristan travels 200 days a year . . . AND the stock stereo system was driving him nuts! 🙂 He wanted to keep the stock head unit (radio/stereo) BUT wanted to upgrade his speakers and add subwoofer. He choose to go with our System 1B. Detailed listing below:

2022 Toyota Tundra Crewmax

Color: Midnight Black

Tristan – ready to head out on his next road trip! Big smiles after upgrading his audio system!

Tristan’s 2022 Toyota Tundra – in for audio system upgrade.

Front Door Component Speakers
Dash Tweeter Replacement with True Component Speaker Sets
Tundra rear door crossover mount, mid bass driver & tweeter
tacotunes true component speakers for your 2022+ Toyota Tundra
New Tweeters installed on door panel.
tacotunes TXD10001 and TXD3204 Amps mounted to laser cut amp rack – during the installation process
2022 Toyota Tundra Dual Subwoofer box holds 2 inch subwoofers.
2022+ Toyota Tundra Subwoofer Box Installation being installed.
2022 Toyota Tundra Rear Door Component Speakers passive crossover and crossover mount
2022 Toyota Tundra Laser Cut Amp Rack bolts directly to stock mounting location. Don’t let audio shops drill holes in your Tundra!
2022 Toyota Tundra Amp Rack with seat pushed all the way forward.
2022 Toyota Tundra Amp Rack with seat at about 5 foot 8 driver. Kick plate protects amps and wiring from passengers.
2022 Toyota Tuundra CrewMax Bed Rack and roof tent.
2022 Toyota Tuundra CrewMax Bed Rack and roof tent.
Dual 10″ Subwoofer Box – Ported
tacotunes.com TT65CS Component Speakers

Tundra Direct Integration – no cutting or splicing your factory wires. Amps bolt to stock mounting location.
2022 Toyota Tundra Audio Upgrade & Wiring Diagram
How to connect amp to your stock stereo
How to install subwoofer 2022 Tundra.
Component Speakers – no cutting or splicing uses all factory wiring.
Tundra Ported Subwoofer Box
2022 Toyota Tundra Audio System Installation
2022 Tundra Factory Tweeter Removed – Stock Tweeter Harness
2022 Tundra Factory Dash Speaker Tweeter
Tacotunes.com TT65CS Component Spekaers

Below you will find a detailed listing of all the parts we used in the installation.

Typical Installation time is 1 day, however if we matt (sound deaden) the front, rear doors and the rear wall behind the subwoofer it adds a day. If we are matting the truck, we keep the truck for two days. One day audio installation and matting jobs are possible, but require at least 12 hours with the truck.

Below is a detailed listing of the audio products installed in Eddie’s Tundra CrewMax

2022 Tundra Factory Integration System:

3 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.

NTUNE6 – LOC / Audio leveler & Bass Enhancement module

Front Door Component Speakers:

Tacotunes.com TT65CS Component Speakers

Tacotunes.com heavy duty speaker mounts cut to 5.6”

TT65 Mid bass Drivers -100 Watts RMS

TT65 Crossover

TT65 Tweeter

Tacotunes.com Front Door Speaker Wire Harness Adapters

Tacotunes.com Dash Speaker Wire Harness Adapters

Tweeters Installed in dash location using tweeter adapters.

Rear Door Components:

Tacotunes.com TT65CS Component Speakers

Tacotunes.com heavy duty speaker mounts cut to 5.6”

TT65 Mid bass drivers Handles -100 watts RMS

TT65 Crossover

TT65 Tweeter

Tacotunes.com Tweeter Harness Adatpers

Tweeters will fit in stock door location

Amps:

tacotunes.com TXD3204v3 – 4 Channel Amp (100×4)

tacotunes.com TXD10001 – Subwoofer Amp

100 x 4 (Speakers)

800 x 1 (Subwoofer)

Subwoofer(s):

Subwoofer Box & Subwoofers

Tacotunes.com Dual 10” subwoofers

NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!

Posted on

2022 Toyota Tundra Audio Stereo Upgrade Speakers Subwoofer Amplifiers Plug and Play

2022 Toyota Tundra Audio System Subwoofer Speakers

Justice is local here in San Antonio. He had our system 1A installed in his Gen 3 Tundra. He contacted us and asked if we could get him in to replace his stock audio – but keep his stock head unit (radio) – just like we did in his GEN2 Tundra. Of course! Below are a few pictures of his 2022 Army Green Toyota Tundra CrewMax.

Justices’ 2022 Toyota Tundra – in for audio system upgrade.

2022 Toyota Tundra Dual Subwoofer box holds 2 inch subwoofers.
2022+ Toyota Tundra Subwoofer Box Installation being installed.
2022 Toyota Tundra Rear Door Component Speakers
2022 Toyota Tundra Rear Door Component Speakers passive crossover and crossover mount
2022 Toyota Tundra Rear Door Component Speakers mid bass driver
2022 Toyota Tundra Laser Cut Amp Rack bolts directly to stock mounting location. Don’t let audio shops drill holes in your Tundra!
2022 Toyota Tundra Amp Rack with seat pushed all the way forward.
2022 Toyota Tundra Amp Rack with seat at about 5 foot 8 driver. Kick plate protects amps and wiring from passengers.
2022+ Toyota Tundra Front Door Component Speakers Dash Tweeters Plug and Play
2022 Toyota Tundra Stereo System Upgrade – Speakers, Subwoofers, Tweeters & Amplifiers
Dual 10″ Subwoofer Box – Ported
tacotunes.com TT65CS Component Speakers

Tundra Direct Integration – no cutting or splicing your factory wires. Amps bolt to stock mounting location.
2022 Toyota Tundra Audio Upgrade & Wiring Diagram
How to connect amp to your stock stereo
How to install subwoofer 2022 Tundra.
Component Speakers – no cutting or splicing uses all factory wiring.
Tundra Ported Subwoofer Box
2022 Toyota Tundra Audio System Installation
2022 Tundra Factory Tweeter Removed – Stock Tweeter Harness
2022 Tundra Factory Dash Speaker Tweeter
Tacotunes.com TT65CS Component Spekaers

Below you will find a detailed listing of all the parts we used in the installation.

Typical Installation time is 1 day, however if we matt (sound deaden) the front, rear doors and the rear wall behind the subwoofer it adds a day. If we are matting the truck, we keep the truck for two days. One day audio installation and matting jobs are possible, but require at least 12 hours with the truck.

Below is a detailed listing of the audio products installed in Eddie’s Tundra CrewMax

2022 Tundra Factory Integration System:

3 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.

NTUNE6 – LOC / Audio leveler & Bass Enhancement module

Front Door Component Speakers:

Tacotunes.com TT65CS Component Speakers

Tacotunes.com heavy duty speaker mounts cut to 5.6”

TT65 Mid bass Drivers -100 Watts RMS

TT65 Crossover

TT65 Tweeter

Tacotunes.com Front Door Speaker Wire Harness Adapters

Tacotunes.com Dash Speaker Wire Harness Adapters

Tweeters Installed in dash location using tweeter adapters.

Rear Door Components:

Tacotunes.com TT65CS Component Speakers

Tacotunes.com heavy duty speaker mounts cut to 5.6”

TT65 Mid bass drivers Handles -100 watts RMS

TT65 Crossover

TT65 Tweeter

Tacotunes.com Tweeter Harness Adatpers

Tweeters will fit in stock door location

Amps:

tacotunes.com TXD3204v3 – 4 Channel Amp (100×4)

tacotunes.com TXD10001 – Subwoofer Amp

100 x 4 (Speakers)

800 x 1 (Subwoofer)

Subwoofer(s):

Subwoofer Box & Subwoofers

Tacotunes.com Dual 10” subwoofers

NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!

Posted on

2022 Toyota Tundra CrewMax System 1B for Justice

Dual 10" Subwoofer Box being installed - 2022 Tundra audio system

Big thank you to Justice for letting us install our System 1B into his 2022 Toyota Tundra CM.

Vehicle2022 Toyota Tundra CrewMax
SystemSystem 1B
PostedApril 2022
ShopTaco Tunes, San Antonio, TX

The system 1B that includes the following:

  • 2022 Tundra Factory Integration System
  • 3 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
  • NTUNE6 – LOC / Audio leveler & Bass Enhancement module
  • Front Door Component Speakers
  • Tacotunes.com TT65CS Component Speakers
  • Tacotunes.com heavy duty speaker mounts cut to 5.6”
  • TT65 Mid bass Drivers -100 Watts RMS
  • TT65 Crossover
  • TT65 Tweeter
  • Tacotunes.com Front Door Speaker Wire Harness Adapters
  • Tacotunes.com Dash Speaker Wire Harness Adapters
  • Tweeters Installed in dash location using tweeter adapters.
  • Rear Door Components
  • Tacotunes.com TT65CS Component Speakers
  • Tacotunes.com heavy duty speaker mounts cut to 5.6”
  • TT65 Mid bass drivers Handles -100 watts RMS
  • TT65 Crossover
  • TT65 Tweeter
  • Tacotunes.com Tweeter Harness Adatpers
  • Tweeters will fit in stock door location
  • Amps
  • tacotunes.com TXD3204v3 Four channel amplifier
  • tacotunes.com TXD10001 Mono subwoofer amplifier
  • 100 watts x 4 to each speaker and 800 x 1 (subwoofers)
  • Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
  • Subwoofer(s)
  • Subwoofer Box & Subwoofers
  • Tacotunes.com Dual 10″ subwoofers
  • Image Dynamics ID10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800)
  • NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!

Install photos

Frequently asked questions

Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?

No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.

What does the NTUNE6 do in a Tundra?

The NTUNE6 is a line output converter, audio leveler and bass enhancement module. It lets you keep your stock stereo and add aftermarket amplifiers while flattening the factory signal.

Can I install a Taco Tunes system myself?

Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.

Posted on

Gen 3 Tundra JBL Audio R&D: Factory Speakers, Amp and Sub Revealed

Gen 3 Tundra JBL Audio R&D by Taco Tunes, photo 1 of 15

Finishing up some R&D on the Gen 3 Toyota Tundras that are equipped with JBL Audio system. The JBL audio system is not much better than Gen 2 Tundras . . I am sure we will be upgrading a bunch of these “audio systems”.
The NON JBL equipped Tundra audio systems will be released very soon. We are just waiting on the sub box manufacturing to be completed. Like most everywhere else here in the US – labor shortages have caused some delays.
Today is phase 2 in the audio R&D phase of the JBL equipped Tundras. We have developed the audio harnesses that will allow us to create an audio system that requires no cutting or splicing of your factory wires. We will provide step by step videos and diagrams that make it fast and easy to upgrade you audio system in your Tundra.
Below we have included some pictures of the stock speakers, amplifier and sub.

VehicleToyota Tundra JBL
PostedMarch 2022
ShopTaco Tunes, San Antonio, TX

Install photos

Frequently asked questions

Can you upgrade a 2022+ Tundra that has the factory JBL system?

Yes. We developed plug-and-play audio harnesses for JBL-equipped Gen 3 Tundras, so the speakers, amplifier and subwoofer can be upgraded without cutting or splicing any factory wires.

How does Taco Tunes integrate with the factory JBL system?

Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.

Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?

No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.

Posted on

2022 Toyota Tundra Stereo System Upgrade Speakers Subwoofer Amplifiers

2022 Toyota Tundra Component Speakers Mid bass & tweeters with crossover network

Clifford drove up a few hours to have us install our System 1B into his 2022+ Toyota Tundra. Clifford is the first “private” 2022+ Tundra owner we have installed. We install many audio systems for Red McCombs Toyota here in San Antonio, plus a number of other dealers use our products as well . We install many audio systems in brand new Tundras before they hit the dealer lot.

2 – 2022 Toyota Tundra CrewMax – Lunar Rock Audio System Upgrades

2 – 2022 Toyota Tundra CrewMax – Lunar Rock Audio System Upgrades

Laser Cut Amp Rac & Tacotunes Amplifiers – bolts to stock mounting location. No drilling!
Dual 10″ Subwoofer Box – Ported
tacotunes.com TT65CS Component Speakers
tacotunes.com tt6CS Component Speakers

Tundra Direct Integration – no cutting or splicing your factory wires. Amps bolt to stock mounting location.
2022 Toyota Tundra Audio Upgrade & Wiring Diagram
How to connect amp to your stock stereo
How to install subwoofer 2022 Tundra.
Component Speakers – no cutting or splicing uses all factory wiring.
Tundra Ported Subwoofer Box
Alfred installing system 1B
2022 Toyota Tundra Audio System Installation
2022 Tundra Factory Tweeter Removed – Stock Tweeter Harness
2022 Tundra Factory Dash Speaker Tweeter
tacotunes.com dual 10″ Subwoofer Box
Tacotunes.com TT65CS Component Spekaers

Below you will find a detailed listing of all the parts we used in the installation.

Typical Installation time is 1 day, however if we matt (sound deaden) the front, rear doors and the rear wall behind the subwoofer it adds a day. If we are matting the truck, we keep the truck for two days. One day audio installation and matting jobs are possible, but require at least 12 hours with the truck.

Below is a detailed listing of the audio products installed in Eddie’s Tundra CrewMax

2022 Tundra Factory Integration System:

3 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.

NTUNE6 – LOC / Audio leveler & Bass Enhancement module

Front Door Component Speakers:

Tacotunes.com TT65CS Component Speakers

Tacotunes.com heavy duty speaker mounts cut to 5.6”

TT65 Mid bass Drivers -100 Watts RMS

TT65 Crossover

TT65 Tweeter

Tacotunes.com Front Door Speaker Wire Harness Adapters

Tacotunes.com Dash Speaker Wire Harness Adapters

Tweeters Installed in dash location using tweeter adapters.

Rear Door Components:

Tacotunes.com TT65CS Component Speakers

Tacotunes.com heavy duty speaker mounts cut to 5.6”

TT65 Mid bass drivers Handles -100 watts RMS

TT65 Crossover

TT65 Tweeter

Tacotunes.com Tweeter Harness Adatpers

Tweeters will fit in stock door location

Amps:

tacotunes.com TXD3204v3 – 4 Channel Amp (100×4)

tacotunes.com TXD10001 – Subwoofer Amp

100 x 4 (Speakers)

800 x 1 (Subwoofer)

Subwoofer(s):

Subwoofer Box & Subwoofers

Tacotunes.com Dual 10” subwoofers

NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!

Posted on

Clifford’s 2022 Toyota Tundra TRD Off-Road Stereo System Upgrade

2 Lunars - 2022 Toyota Tundras getting audio system upgrades - 2022 Tundra TRD Off-Road audio

Clifford’s 2022 Toyota Tundra Stereo System Upgrade2 Lunars – 2022 Toyota Tundras getting audio system upgradesClifford’s 2022 Toyota Tundra Stereo System Upgrade2022 Toyota Tundra TRD Offroad getting system 1BClifford’s 2022 Toyota Tundra Stereo System Upgradetacotunes.com TT65CS Component Speakers Front DoorsClifford’s 2022 Toyota Tundra Stereo System UpgradeTacotunes TT65CS Dash TweetersClifford’s 2022 Toyota Tundra Stereo System UpgradeAmp Rack Bolts to stock factory Location – no drilling into your truck!Clifford’s 2022 Toyota Tundra Stereo System UpgradeLaser Cut Amp rack fits under driver seat, uses factory bolt location – don’t drill into your tundra!Clifford’s 2022 Toyota Tundra Stereo System UpgradeInstallation Wiring Diagram for our customers in progress. The black boxes are going to be QR codes that link you to proper video.Clifford’s 2022 Toyota Tundra Stereo System UpgradeClose Up Section 1Clifford’s 2022 Toyota Tundra Stereo System UpgradeClose Up Section 2Clifford’s 2022 Toyota Tundra Stereo System UpgradeClose Up Section 3Clifford’s 2022 Toyota Tundra Stereo System UpgradeClose Up Section 4Clifford’s 2022 Toyota Tundra Stereo System UpgradeSide View Dual 10″ Subwoofer Box, fits behind driver side rear seat.Clifford’s 2022 Toyota Tundra Stereo System UpgradeAlfred getting it done!Clifford’s 2022 Toyota Tundra Stereo System Upgrade2 – Lunars getting Audio SystemsClifford’s 2022 Toyota Tundra Stereo System UpgradeStock Dash SpeakerClifford’s 2022 Toyota Tundra Stereo System UpgradeStock Wiring – Our Crossover Network Connects directly to this harness – no cutting or splicing requiredClifford’s 2022 Toyota Tundra Stereo System UpgradeNew TweeterClifford’s 2022 Toyota Tundra Stereo System UpgradeDual 10″ Ported Subwoofer for 2022 TundraClifford’s 2022 Toyota Tundra Stereo System UpgradeClifford’s 2022 Toyota Tundra Stereo System Upgradetacotunes.com TT65CS Component Speakers Front & Rear – PNP harnesses. Don’t cut or splice your factory wiring!Clifford’s 2022 Toyota Tundra Stereo System UpgradeClifford’s 2022 Toyota Tundra Stereo System UpgradeClifford’s 2022 Toyota Tundra Stereo System UpgradeClifford’s 2022 Toyota Tundra Stereo System UpgradeClifford’s 2022 Toyota Tundra Stereo System Upgrade

Vehicle2022 Toyota Tundra TRD Off-Road
PostedMarch 2022
ShopTaco Tunes, San Antonio, TX

Install photos

Frequently asked questions

Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?

No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.

Can I install a Taco Tunes system myself?

Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.

Can a Taco Tunes system be added when I buy a new Tundra?

Yes. Many of our systems are rolled into new vehicle financing, and we often install Tundra audio systems for dealers before trucks reach the lot.

Posted on

2022+ Toyota Tundra Subwoofer Box Options: From Dual 8s to Dual 12s

2022+ Toyota Tundra Subwoofer Box Options by Taco Tunes, photo 1 of 7
Vehicle2022+ Toyota Tundra
PostedFebruary 2022
ShopTaco Tunes, San Antonio, TX
  • Round 1 of subwoofer boxes for your 2022 and up Tundra about to be released. As many of you guys are aware, we have already started production on our fiberglass subwoofer box for your 2022 Tundra. These wooden smaller boxes fit behind the seats of your Tundra. For our heavy bass lovers, we will be releasing our fiberglass boxes soon.
  • Currently we will be offering the following subwoofer solutions for your 2022+ Tundra:
  • 1. Dual 8” subwoofer enclosure – ported (fits behind seats) 1.1 Cu Ft
  • 2. Single 10” subwoofer enclosure – ported (fits behind seats) 1.2 Cu Ft
  • 3. Single 12” subwoofer enclosure – ported (fits under rear seats) 1.7 Cu Ft
  • 4. Dual 12” subwoofer enclosure – ported (fits under rear seats) 2.3 Cu Ft
  • 5. Dual 12” subwoofer enclosure – ported remove most of your storage compartment with around 4.7 cu ft air space. (still in final production)
  • NOTE: These are going to be offered with LineX spray or naked.

2022 Toyota Tundra Subwoofer Enclosure (1 of 4 designs) When it comes to subwoofers – air space is King!!! Here at tacotunes we always try to avoid using “shallow mount” subwoofers. Sure they get “loud” and sound “better than nothing” . . . but their low frequency roll off leaves much to be desired, especially at lower volumes. You just cant beat the “Sound Quality” AND the ability to piss of the neighbors with a well designed / ported enclosure.
Of course this always sparks the sealed/vs ported debate. But I can assure you that 99% of our customers chose our ported setups over sealed enclosures (when space and budget allows). *** this is the first prototype…we are making final adjustments… the box will be carpeted / coated black.

Install photos

Get yours

Shop the 2022+ Tundra CrewMax System 1B and the 2022+ Tundra audio products. Have a question about your truck? Contact Taco Tunes support and we will help you pick the right parts.

Frequently asked questions

What subwoofer box options are there for a 2022+ Tundra?

We offer ported enclosures that fit behind or under the rear seats in sizes from a dual 8-inch box at 1.1 cubic feet up to dual 12-inch boxes at 2.3 cubic feet, plus a larger dual 12-inch box with about 4.7 cubic feet that replaces most of the storage compartment.

Ported or sealed: which subwoofer box is best for a truck?

When space and budget allow, nearly all of our customers choose a ported box. A well-designed ported enclosure with plenty of air space gives deeper, louder bass than a shallow-mount sub, especially at lower volumes.

Are shallow-mount 12″ subs better than full-size 10″ subs in a Tundra?

Not in our experience. Enrique tried two 12″ shallow-mount subs first, but they lacked depth. After switching to our full-size TT10 10″ subwoofers, he got richer, deeper bass.

Posted on

Building Plug-and-Play Audio for the 2022 Tundra: Harnesses, Adapters and Boxes

Building Plug-and-Play Audio for the 2022 Tundra by Taco Tunes, photo 1 of 2
Vehicle2022 Toyota Tundra
PostedFebruary 2022
ShopTaco Tunes, San Antonio, TX
  • Back on December 2nd, 2021, we created all the parts necessary to install an audio system into your 2022 Toyota Tundra . . .which included the speaker adapters and every harnesses necessary for installation.
  • In early January we completed the manufacturing process for every harness required for your new 2022 Tundra. We also completed 3 different subwoofer enclosures for your 2022 Tundra.
  • Our Tundra direct integration system ensures that you don’t have to cut or splice a single wire in your Tundra. You will be able to keep your stock stereo (head unit) and get unmatched sound quality in your 2022+ Toyota Tundra.
  • We will soon be releasing our complete audio product designed for your Tundra. Don’t let any audio shops hack up your Tundra! We have already seen some pretty “shady” work. Unfortunately, we have to fix a lot of these “hack jobs”.
  • And finally, we are completing the installation diagrams and videos. Be sure to like us here on FB, follow us on IG/Twitter & subscribe on YouTube! Our plug and play system coupled with a color coded setup will help you install our TRUE component speakers and subwoofer(s) in your Tundra quickly and easily.
  • High End Audio System designed specifically for your Tundra that no other company can match in the industry.

Install photos

Get yours

Shop the 2022+ Tundra CrewMax System 1B and the 2022+ Tundra audio products. Have a question about your truck? Contact Taco Tunes support and we will help you pick the right parts.

Frequently asked questions

Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?

No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.

Why shouldn’t an audio shop splice my Tundra’s factory wiring?

Cutting or splicing factory wiring can damage JBL components and create problems that are expensive to repair. We repair a large number of JBL-equipped Toyotas for this reason, and there is no need to cut anything with plug-and-play harnesses.

Can I install a Taco Tunes system myself?

Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.

Posted on

Taco Tunes System 1B Wins Best Sound System at PNW Tundras

Taco Tunes System 1B Wins Best Sound System at PNW Tundras by Taco Tunes, photo 1 of 2

Give a like to our buddy Pete Chandra out in PNW Tundras! He took home the GOLD!
BEST SOUND SYSTEM 🥇
Showcasing the Tacotunes System 1B!

SystemSystem 1B
PostedJanuary 2022
ShopTaco Tunes, San Antonio, TX

This is the 2nd time a member with a Tacotunes sound system walked away with a trophy over at PNW Tundras ,Which only means 1 thing! Those guys know good quality audio😉

Congratulations Pete! And thank you for being part of the Tacotunes Family🤙

Install photos

Frequently asked questions

How long does a Taco Tunes system last?

A long time. We regularly see systems that are 5 to 8 years old come back for reinstalls or checkups still playing like new, because the parts are matched to the truck and nothing in the factory wiring is cut.

What is the difference between System 1A and System 1B?

System 1A is our streamlined package with front components, rear coaxials, a multi-channel amp and a single sub. System 1B steps up to more speakers, more power and dual subwoofers.

Posted on

Toyota Tundra System 1A Installation Instructions – NON JBL & JBL

System Quick Overview

How to tune TXD8005
How to tune TXD8005

Following the instructions below is crucial to a successful installation. We recommend prepping the following items the day before you begin your installation. This will ensure all the parts are at your disposal. There are a couple of steps where it will help to have a buddy help you out. Not necessary but makes it easier. Do NOT start drinking your favorite beverage until recommend below. Plus be sure to keep your mind sharp. By getting the installation done right the first time you will enjoy years of quality sound in your Toyota Tundra. Shortcuts and rushing through the install will cause issues down the road. Take your time enjoy the install.

VIDEO INSTALLATION SERIES BELOW

Prep Time – 1-3 hours

Prepping the day before the install:

  1. Download test tones and burn to CD. Click here to download test tones.
  2. Mount your crossovers to the provided crossover mounts. (see speaker install video)
  3. Connect the 18g & 16g wiring to the crossovers
  4. If mounting your tweeters in sail panels, prepare your sail panels.
  5. Assemble your amp rack, amplifier, distribution block etc. (see video below)
  6. Assemble your subwoofer / subwoofer box. (see video below)
  7. Watch installation videos to understand the process.
  8. Get your six pack on ice. DO NOT OPEN until instructed! 🙂
  9. Go over checklist and ensure all parts are in the package. We have a checklist that we do on EACH system. But we are human so it is possible a part was missed.

Installation: 3 – 5 hours

Tundra Preparation

UNPLUG YOUR BATTERY. Remove the NEGATIVE connection from the battery and secure it AWAY from battery.

  1. Unplug battery – ground connection.
  2. Remove the door panels – if you are installing new speakers.
  3. Remove door sills.
  4. Remove front passenger seat. (you can lean seat back per video)
  5. Remove center console cover – cover ONLY. (Per Video)
  6. Remove rear seats (if installing subwoofer) – have a friend help the rear seats are heavy. ( you can lean larger seat to front of vehicle to avoid removal). Remove the smaller passenger side seat to make it easier to access amp under front seat. NOTE: Use the rear wall pad (per vid) as a way to protect your carpet from the rear seats.
  7. Remove stock amplifier under front passenger seat. (save the bolts)
  8. Remove front / rear speakers.
  9. Remove dash speakers / tweeters and center speaker if equipped. You can leave them unplugged and in place, but we recommend leaving them unplugged during and after you have completed your install. Note: We offer 2 solutions for JBL equipped Tundras, please see notes below.
  10. If you will be matting your doors we suggest doing this before you begin the steps below. Keep in mind matting will add a full day to your install.

Installation Steps:

  1. Run power wire from battery to new amp location. (see video)
  2. Assemble the fuse block and complete under hood details. (Do not connect to battery)
  3. Run subwoofer wire to rear of vehicle per the installation video.
  4. Install amps / amp rack per video. (do not connect speaker output connections)
  5. Connect input side of amp first. (Blue molex plugs from direct connect harness)
  6. Connect battery
  7. Tune amplifiers per tuning video(s).
  8. Install front / rear speakers.
  9. Install subwoofer.
  10. Test system – ensure playing correctly.
  11. disconnect battery.
  12. Install center console.
  13. Install seats BEFORE installing door panels and door sills. (battery should be unplugged)
  14. Install door sills.
  15. Install door panels.
  16. Connect battery.
  17. Test the sound and ensure all playing properly.
  18. Open a single beverage, beat your chest and listen to your tunes for about 10 minutes.
  19. Finish cleaning up odds and ends.
  20. Be sure to save ALL stock parts.

Congratulations you just installed an audio system that would have cost thousands of $ at your local audio shop.

System 1A Install Videos:

Preparing for installation:

Assemble Amp Rack & 5 Channel Amp

Assemble Subwoofer Box:

How to remove door panels:

How to install Front Door Speakers:

Installing Power Wire

How to tune TXD8005
How to tune TXD8005

How to install TXD8005 5 Channel amplifier – 2014-2020 Toyota Tundra

How to tune TXD8005 (System 1)

How install & route subwoofer wiring from amp to subwoofer box:

How to install subwoofer box:

How to install bass control knob in your cupholder: