Posted on

JL Audio ZR100 CT Tweeters – Toyota Tundra

JL Audio ZR100 CT Tweeters

JL Audio ZR100 CT Tweeters Toyota Tundra
JL Audio ZR100 CT Tweeters Toyota Tundra

JL Audio ZR100 CT Tweeters

How to install JL Audio ZR100 CT Tweeters in your Toyota Tundra

When you order these tweeter mounts from our site for your JL Audio ZR100 CT Tweeters, you will want to specify a custom size cutout @ 1.75″ cutout. We custom size the tweeter mount to fit your tweeter. Please keep in mind tweeters come in MANY different sizes. Please be sure to include the cutout diameter in the order notes.

Click HERE to check out our audio products for your Toyota Tundra

Cutout Diameter: 1.75″

 


 

ZR100-CT

1-inch (25 mm) Component Tweeter, In-Line High-Pass Filters Included

Our reference quality ZR component speakers are made for those seeking the highest possible levels of audio performance and are the pinnacle of the JL Audio component speaker lineup.

The ZR100-CT component tweeters feature 1-inch aluminum domes with rubber-roll suspensions that damp unwanted ringing while delivering spectacular high-frequency extension. They provide extremely balanced high-frequency reproduction from 4 – 25 kHz. A flush-mounting fixture with a classy electro-formed ring provides a sophisticated touch in any installation.

Tweeter kit includes two tweeters with grilles and two mounting fixtures. Inline 12 dB / octave high-pass filters with tweeter protectors are also included with this kit. The ZR100-CT is designed to operate above 4 kHz with a minimum high-pass slope of 12 dB / octave.

When nothing but the best will do, choose ZR.

Sonic character: Accurate and detailed

Made in Germany, Sold as a pair.

Continuous Power Handling (RMS)* 85 W
Peak Music Power* 225 W
Recommended RMS Amplifier Power (per Ch.)* 25 – 175 W
System Efficiency 90.5 dB @ 1 W / 1 m1 W / 1 m
System Nominal Impedance 8 Ω
System Frequency Response 4 kHz – 25 KHz ± 3 dB

 

Posted on

JL Audio TR050-CT Tweeters – Toyota Tundra

JL Audio TR050-CT Tweeters

JL Audio TR050-CT Tweeters Toyota Tundra
JL Audio TR050-CT Tweeters Toyota Tundra

 

JL Audio TR050-CT Tweeters

How to install JL Audio TR050-CT Tweeters in your Toyota Tundra

When you order these tweeter mounts from our site for your JL Audio TR050-CT Tweeters, you will want to specify a custom size cutout @ 1.625″ cutout. We custom size the tweeter mount to fit your tweeter. Please keep in mind tweeters come in MANY different sizes. Please be sure to include the cutout diameter in the order notes.

Click HERE to check out our audio products for your Toyota Tundra

Cutout Diameter: 1.625″

 

JL Audio TR050-CT Tweeters Toyota Tundra


 

TR050-CT

0.5-inch (12 mm) Textile Balanced Dome Tweeters

The TR component tweeters are built with 0.5-inch textile balanced dome diaphragms that deliver clean, extended response, on and off axis. The tweeters can be flush-mounted or surface-mounted with the supplied fixtures.

Inline 6 dB / octave high-pass filters with tweeter protectors are included with this kit. The TR050-CT is designed to operate above 4 kHz with a minimum high-pass slope of 6 dB / octave.

Sonic character: Clear and Efficient

Sold as a pair.

Continuous Power Handling (RMS)* 50 W
Peak Music Power* 125 W
Recommended RMS Amplifier Power (per Ch.)* 2 – 50 W
System Efficiency 91.0 dB @ 1 W / 1 m
System Nominal Impedance 8 Ω
System Frequency Response 4 Hz – 22 KHz ± 3 dB

 

 

 

 

Posted on

JL Audio C3 650 Component Speakers – Toyota Tundra

JL Audio C3 650 Component Speakers Toyota Tundra
JL Audio C3 650 Component Speakers Toyota Tundra

JL Audio C3 650 Component Speakers

Toyota Tundra JL Audio C3 650 Component Speakers

Installation tips:

To install JL Audio C3 650 Component Speakers into your Toyota Tundra, you will want to use tacotunes.com speaker adapters designed to work in your Tundra. The JL Audio C3 650 Component Speakers require a 5.6” cutout diameter for the mid range speakers. The JL Audio C3 650 Component Speakers tweeters will require a 1.875″ cutout diameter.

Click HERE to check out our audio products for your Toyota Tundra

The JL Audio C3 650 Component Speakers will fit you your Toyota Tundra without any cutting, drilling or modifying your Tundra.

Summary:

Mid range Driver: 5.6″ cutout diameter

Tweeter: 1.875″ cutout diameter

Top Mount Depth: 2 5/8″

JL Audio C3 650 Component Speakers Manual

These speakers have been test fit to work in the front doors Toyota Tacoma 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014



 

C3-650

2-Way Convertible Component / Coaxial System: 6.5-inch (165 mm) Woofer, 1-inch (25 mm) Silk Dome Tweeter
There are times when an installation calls for a separate woofer and tweeter and other times when a coaxial is the better approach. With the Evolution® C3 Convertible Component Systems, the same product can be deployed in either configuration, delivering outstanding audio power and quality in each application.

The C3-650 system features 6.5-inch (165 mm) component woofers with oversized 1.2-inch (30.5 mm) voice coils, mineral-filled polypropylene cones and injection-molded polymer baskets. The woofer design benefits from JL Audio’s vast woofer design experience and advanced modeling systems.

The C3 tweeters are built with 1-inch silk dome diaphragms that deliver powerful, extended response, on and off axis. Flush-mounting and surface-mounting fixtures are included to fit a wide variety of installation needs. They can also be mounted onto the woofers in a coaxial format using the included fixtures.

C3 crossover networks are compact and built with premium component parts, including Mylar® capacitors and segmented air-core inductors. Four levels of tweeter attenuation are provided, as well as three levels of mid-range presence adjustment, for twelve possible voicing combinations!

Woofer grilles are included, each consisting of a black grille tray and a black steel mesh grille with an electroformed JL Audio logo.

Sonic character: Clean and Powerful

Sold as a pair.

Posted on

JL Audio 10W0 10 inch Subwoofer – Toyota Tundra

JL Audio W0 10 inch Subwoofer Toyota Tundra
JL Audio W0 10 inch Subwoofer Toyota Tundra
Toyota Tundra Double Cab Subwoofer Box
Toyota Tundra Double Cab Subwoofer Box

JL Audio 10W0 10 inch Subwoofer

 

Toyota Tundra JL Audio 10W0 10 inch Subwoofer

To install JL Audio 10W0 10 inch Subwoofer will fit Toyota Tundra, you will want to use tacotunes.com subwoofer box enclosure designed to work in your Tundra Double Cab. The JL Audio 10W0 10 inch Subwoofer 9.1” cutout diameter for the subwoofer.

Click HERE to check out our audio products for your Toyota Tundra

The JL Audio 10W0 10 inch Subwoofer will fit you your Toyota Tundra without any cutting, drilling or modifying your Tundra.

NOTE: To avoid cutting plastic storage bins you will need to remove them. If you want to have a custom fit look, you will want to use the following instructions that require cutting and modifying parts of your Toyota Tundra Double Cab.

Summary:

Subwoofer : 9.1″ cutout diameter

Top Mount Depth: 5″

JL Audio W0 10 Inch Subwoofer Toyota Tundra

MAX RMS Rating: 300 Watts

 

Nominal Diameter 10.0 in / 250 mm
Overall Diameter (A) 10.52 in / 267 mm
Mounting Hole Diameter (B) 9.0625 in / 230 mm
Bolt Hole Circle (C) 9.7 in / 246.5 mm
Magnet Diameter (D) 5.05 in / 128 mm
Mounting Depth (E) 4.90 in / 124 mm
Driver Displacement 0.034 cu ft / 0.96 L
Net Weight 7.50 lb / 3.40 kg
Free Air Resonance (Fs) 32.09 Hz
Electrical “Q” (Qes) 0.64
Mechanical “Q” (Qms) 10.752
Total Speaker “Q” (Qts) 0.604
Equivalent Compliance (Vas) 1.095 cu ft / 31.01 L
One-Way Linear Excursion (Xmax)* 0.45 in / 11.4 mm
Reference Efficiency (no) 0.15%
Efficiency (1 W / 1 m)** 84.07 dB SPL
Effective Piston Area (Sd) 48.909 sq in / 0.0316 sq m
DC Resistance (Re) 4.280 Ω

* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied. ** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”.

Wall Thickness 0.75 in / 19 mm
Front Baffle Thickness 0.75 in / 19 mm
Volume (net int.) 0.65 cu ft / 18.41 L
External Width (W) 18 in / 457 mm
External Height (H) 11 in / 279 mm
External Depth (D) 9 in / 229 mm
F3 42.4 Hz
Fc 53.23 Hz
Qtc 1.002
Enclosure Notes* The enclosure recommendations listed above are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6.5 mm) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure. * All enclosure volumes listed above are net internal volumes! Driver displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions above have already taken this into account. * When using multiple subwoofers in a common enclosure you will need to recalculate the enclosure and port dimensions. For assistance please contact your authorized JL Audio dealer or JL Audio Technical Support. * We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and a high-quality amplifier. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance. * All specifications are subject to change without notice.

Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.

When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van.

 

 

Posted on

JBL MS-62C Component Speakers – Toyota Tundra

JBL MS-62C Component Speakers Toyota Tundra
JBL MS-62C Component Speakers Toyota Tundra

JBL MS-62C Component Speakers

Toyota Tundra JBL MS-62C Component Speakers

To install JBL MS-62C Component Speakers into your Toyota Tundra, you will want to use tacotunes.com speaker adapters designed to work in your Tundra. JBL MS-62C Component Speakers require a 5.8” cutout diameter for the mid range speakers. The JBL MS-62C Component Speakers tweeters will require a 1.78″ cutout diameter.

Click HERE to check out our audio products for your Toyota Tundra

The JBL MS-62C Component Speakers will fit you your Toyota Tundra without any cutting, drilling or modifying your Tundra.

Summary:

Mid range Driver: 5.8″ cutout diameter

Tweeter: 1.78″ cutout diameter

Top Mount Depth: 2 3/8″

JBL MS-62C Component Speakers Toyota Tundra

These speakers have been test fit to work in the front doors Toyota Tacoma 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014


 

General Specifications

Type Two-Way
Size 6-1/2

Audio Specifications

Frequency Response 60Hz-20kHz
Power Handling (Peak) 320W
Nominal Impedance 4 ohms
Power Handling (RMS) 160W
Sensitivity (2.83V/m) 89dB

Dimensions

Mounting Cutout Diameter (in) 5.82
Mounting Cutout Diameter (mm) 148
Mounting Cutout Diameter Tweeter (in) 1.77
Mounting Cutout Diameter Tweeter (mm) 45
Mounting Depth (in) 3.07
Mounting Depth (mm) 78
Mounting Depth Tweeter (in) .9
Mounting Depth Tweeter (mm) 23

Warranty

USA Warranty Length 1 Year Warranty

The JBL® MS-62C is a premium 6-1/2-inch (160-millimeter) midrange and tweeter component speaker system with an audiophile-quality external passive filter network plus relative phase and output levels to fine-tune the final speaker responses. Numerous innovative design features provide outstanding fidelity that outperforms even respected European brands at a price that’ll leave listeners thoroughly impressed. Installation-friendly features and multiple possible configurations accommodate a broad range of mounting locations.

 

25 – 320 watts suggested amplifier power range

 

Fiberglass-laminate woofer cone

 

Woofer phase plug

 

Cast-aluminum woofer frame

 

Vented woofer magnet assembly

 

Spring-loaded connection terminals

 

Inverted titanium-dome tweeter

 

Flexible tweeter-mounting configurations

 

Audiophile-quality passive filter network

 

Premium speaker wire included

 

Match with other JBL MS Series products

 

Posted on

JBL GTO18T Tweeters – Toyota Tundra

JBL GTO18T Tweeters

JBL GT018T Tweeter Toyota Tundra
JBL GT018T Tweeter Toyota Tundra

JBL GTO18T Tweeters

How to install JBL GTO18T Tweeters in your Toyota Tundra

When you order these tweeter mounts from our site for your JBL GTO18T Tweeters, you will want to specify a custom size cutout @ 1.875″ cutout. We custom size the tweeter mount to fit your tweeter. Please keep in mind tweeters come in MANY different sizes. Please be sure to include the cutout diameter in the order notes.

 

Click HERE to check out our audio products for your Toyota Tundra

JBL GTO18T Tweeters Toyota Tundra


The perfect tweeter to optimize your vehicle’s stereo image

Need to tune up your system and add some highs? The GTO18T is the perfect solution. It’s a 1″ (25mm) edge-driven My-Ti™ tweeter with I-Mount™ tweeter-mounting system. My-Ti (Mylar®/titanium composite) tweeters are stiff, light and extremely efficient. The well-thought-out I-Mount system allows for easy and versatile installation of the GTO18T. The GTO18T tweeter also features JBL’s proprietary Starfish™ tweeter mount, which allows the tweeter to be installed in a variety of factory locations.

 

Tweeter Specifications

Tweeter Size 1″ Tweeter Design Dome Tweeter Composition Mylar/Titanium Hybrid Flush Mount Yes Surface Mount Yes Angled Mount Yes Peak Power Handling 150 watts RMS Power Handling 50 watts Sensitivity 92 dB Frequency Response 2,500 – 21,000 Hz Impedance (Per Voice Coil) 2 ohms Top-Mount Depth 1″ Cutout Dimensions 1-3/4″ x 1-3/4″

 

  • 1″ Grand Touring Series Car Tweeter
  • Power Handling:
  • Peak: 300 watts per pair / 150 watts each
  • RMS: 100 watts per pair / 50 watts each
  • Mylar/titanium composite dome tweeters
  • I-Mount for simple and versatile installation
  • Starfish tweeter mount allows the tweeter to be installed in a variety of factory locations
  • Frequency response: 2,500-21,000 Hz
  • 2 ohms impedance
  • Sensitivity: 92 dB
  • Cut-out diameter: 1-3/4″
  • Top-mount depth: 1″

 

Posted on

Infinity Reference 6500cx Component Speakers – Toyota Tundra

Infinity X REF6500cx Manual Toyota Tundra
Infinity X REF6500cx Manual Toyota Tundra

Infinity Reference 6500cx Component Speakers

Toyota Tundra Infinity Reference 6500cx Component Speakers

Installation tips:

To install Infinity Reference 6500cx Component Speakers into your Toyota Tundra, you will want to use tacotunes.com speaker adapters designed to work in your Tundra. The Infinity Reference 6500cx Component Speakers require a 5.1” cutout diameter for the mid range speakers. The Infinity Reference 6500cx Component Speakers tweeters will require a 1.5625″ cutout diameter.

Click HERE to check out our audio products for your Toyota Tundra

The Infinity Reference 6500cx Component Speakers will fit you your Toyota Tundra without any cutting, drilling or modifying your Tundra.

Summary:

Mid range Driver: 5.1″ cutout diameter

Tweeter: 1.5625″ cutout diameter

Top Mount Depth: 2 1/16″

Infinity X REF6500cx Manual Toyota Tundra

These speakers have been test fit to work in the front doors Toyota Tacoma 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014



Want an easy upgrade to your weak factory speakers without busting your budget? The Infinity® Reference X Series is for you. It’s engineered to bring your factory audio system to life, or to add clarity and depth to an aftermarket system. With innovative, patented technologies, and the kind of premium quality and construction that you’d expect from the world’s top-selling premium car speaker brand, Infinity Reference X speakers will transform your listening experience.

The Reference X series includes multiple configurations to fit most vehicle speaker openings, so you don’t have to worry about major installation “surgery.” From 3/4-inch tweeters, to robust 6-by-9-inch woofers with coaxially mounted tweeters, to a three-way system that can handle up to 300 watts of power, there’s an Infinity® Reference X model that’s right for your vehicle. Engineered for best-in-class performance, and available at a very accessible price, Infinity Reference X speakers will deliver clean, crisp reproduction of your favorite music like you’ve never heard it before

Product details

Infinity® Reference X speakers at a glance:
• Multiple sizes to fit most vehicles • High-quality materials and construction • Plus One™ woofer cones • Edge-driven tweeters • True 4-ohm architecture • UniPivot™ tweeters • Adjustable tweeter levels • Vented motor assemblies • Easy installation and a custom-fit look
Multiple sizes to fit most vehicles. The Infinity® Reference X speaker series includes a wide variety of configurations to fit most vehicle speaker openings without cutting or modification. It’s the easiest way to maximize the sound performance of your factory system.
High-quality materials and construction. Advanced materials and construction include treated tweeter domes for less speaker fatigue, smoother response and better performance at the crossover frequency. Speaker motors are oversized for higher sensitivity. Robust construction and inherent weather resistance are evident in the polypropylene woofer cones and rubber surrounds. What’s more, each model is individually “voiced” for broad-spectrum tonal balance and clarity within the critical vocal frequencies – in other words, you’ll hear lyrics that you could never decipher before.
Plus One™ woofer cones. This innovative design (patent no. 7,548,631 B2) yields up to 30 percent more active cone-radiating surface area compared to conventional speakers. These “over-sized” woofers deliver strong, accurate lows, greater bass output and higher sound pressure levels (SPL).
Edge-driven tweeters. High-performance edge-driven soft-dome tweeters in the Infinity® Reference X speaker series provide greater clarity with reduced distortion. In addition, they have higher power-handling capabilities and better sound integration with the woofers (all models except 3002cfx).
True 4-ohm architecture. The Infinity® Reference X series’ low-impedance voice coils make the most of the power they receive from the amplifier, extracting the strongest sound pressure levels (SPL) and the clearest sound from factory systems.
UniPivot™ tweeters. Sometimes tweeters aren’t positioned in the best locations. This innovative feature lets you “aim” the tweeters for improved stereo imaging (models 6520ix, 5002ix, 9602ix and 8602cfx only).
Adjustable tweeter levels. You and your passengers aren’t always “on axis” with the tweeters. Adjustable +0 and +3dB settings let you custom-tune higher frequencies, optimizing the sound for different in-vehicle tweeter locations (all except 3002cfx and 6402cfx).
Vented motor assemblies. Another innovative Infinity® Reference X design feature, vented motor assemblies run cooler for greater durability and longevity. They also decrease mechanical noise by reducing the speed of the airflow in the motor. All of this leads to better bass response at very low frequencies.
Easy installation and a custom-fit look. The included mounting adapter ring (models 6502ix, 6402cfx and 6500cx) makes installation easy, allowing the same speaker to be used in different factory locations. Component systems include low-profile tweeters that can be flush-mounted, angle-mounted or surface-mounted, giving you greater flexibility during installation. And of course you’ll want to show off your upgrade, so the Infinity logo is silkscreened on the woofer cones of grille-less models, and there are Infinity badges included if you retain the factory speaker grilles.

 

 

Back to top

Full specs

Speaker Features/Specifications

Power Handling, RMS 90 W
Power Handling, Peak 270 W
Frequency Response 53Hz-21kHz
Nominal Impedance 3 Ohm
Sensitivity (2.83V @1m) 93 dB
Posted on

Hybrid Audio Tech i61-2v2 Component Speakers – Toyota Tundra

Hybrid Audio Technologies Imagine Component Speakers Toyota Tundra
Hybrid Audio Technologies Imagine Component Speakers Toyota Tundra

Hybrid Audio Tech i61-2v2 Component Speakers

Toyota Tundra Hybrid Audio Tech i61-2v2 Component Speakers

To install Hybrid Audio Tech i61-2v2 Component Speakers into your Toyota Tundra, you will want to use tacotunes.com speaker adapters designed to work in your Tundra. The Hybrid Audio Tech i61-2v2 Component Speakers require a 5.6″ cutout diameter for the mid range speakers. The Hybrid Audio Tech i61-2v2 Component Speakers tweeters will require a 2.13″ cutout diameter.

Click HERE to check out our audio products for your Toyota Tundra

The Hybrid Audio Tech i61-2v2 Component Speakers will fit you your Toyota Tundra without any cutting, drilling or modifications to your Tundra.

Summary:

Mid range Driver: 5.6″ cutout diameter

Tweeter: 2.13 cutout diameter

Top Mount Depth: 2.7″

Toyota Tundra Hybrid Audio Tech Imagine Component Speakers Imagine

 

The Imagine series consist of coaxial/convertible component sets designed for the discerning consumer interested in more than just an ‘OEM replacement speaker.’

The Imagine line-up has quickly become Hybrid Audio’s best-selling speaker, and a favorite amongst dealers and consumers because of its price to performance ratio. Imagine easily outperforms sets costing twice to three times the price. In fact, Imagine was named “one of the top-11 best bargain speakers available” by Car Audio & Electronics Magazine in 2011.

Kits include a pair of cast ABS frame midbass coaxials with water-proof paper cones proprietary to Hybrid Audio Technologies, high-energy ferrite magnets, 25mm soft-dome tweeters, component set conversion items (midbass phase plugs, tweeter cups and hardware, connection wire, and an extra set of magnet decals), integrated high- quality Mylar tweeter crossover capacitors.

Also available, are a range of incredible subwoofers in both the Stage II Imagine series and Stage IV Clarus series, including the I6SW, a 6.5-inch long-throw subwoofer, and the powerful C15SW, a 15-inch low-inductance, low-distortion subwoofer, available in either dual 2 ohm or dual 4 ohm configurations.

 

 

Posted on

Hertz HSK 165 – will they fit in my Toyota Tacoma Double Cab – Toyota Tundra

Hertz Hi Energy HSK165 Component Speakers.Toyota Tundra
Hertz Hi Energy HSK165 Component Speakers.Toyota Tundra

Reply from tacotunes.com:

You will want to order: http://shop.tacotunes.com/Tundra-Speaker-Installation-Front-Door-Mounts-65-HDP-TACO-65F-P.htm

According to the manual Hertz Hi Energy HSK165 Component Speakers Manual Toyota Tundra you will need to spec a 5.8 inch coutout for the mid range driver & 1.614 cutout diamter for your tweeters. You can order the tweeters for your Tundra here @

Click HERE to check out our audio products for your Toyota Tundra

Please be sure to put size above in the order notes.

Customer info removed by request.

1

Tetolon® soft dome tweeter.

2

25mm ø, ferrofluid-cooled mobile voice coil.

3

High energy Neodymium magnet.

4

Rear acoustic chamber.

5

Revolving support and accessories for factory location and flush mounting.

6

Very flexible, high current input cable.

Woofer:

1

Soft iron plates for high heat dissipation, part of the symmetrical magnetic flux motor.

2

Over-sized magnet; provides outstanding energy for maximum control.

3

Pure copper voice coil wound on a KSV former; for excellent thermal and mechanical

capability.

4

Vented bottom plate; improves linearity and thermal dissipation.

5

Damped Mesh Fibre Cone; for extended bandwidth and smooth response.

6

V-cone®; for the best off-axis dispersion and mid-high frequency detail.

7

Anti-vibration rubber magnet cover; damps spurious vibrations.

8

Aerodynamic die-cast aluminium basket; eliminating rear wave reflections.

9

Radial Venting System; for efficient thermal management.

10

Loss-less Polymer Rubber Surround; for long throw and maximum damping

Posted on

Focal Polyglass 170 V Component Speakers – Toyota Tundra

Focal Polyglass 170 V Component Speakers Toyota Tundra
Focal Polyglass 170 V Component Speakers Toyota Tundra

Focal Polyglass 170 V Component Speakers

Toyota Tundra Focal Polyglass 170 V Component Speakers

To install Focal Polyglass 170 V Component Speakers into your Toyota Tundra, you will want to use tacotunes.com speaker adapters designed to work in your Tundra. Focal Polyglass 170 V Component Speakers require a 5.6” cutout diameter for the mid range speakers. The Focal Polyglass 170 V Component Speakers tweeters will require a 1.797″ cutout diameter.

Click HERE to check out our audio products for your Toyota Tundra

The Focal Polyglass 170 V Component Speakers will fit you your Toyota Tundra without any cutting, drilling or modifying your Tundra.

Summary:

Mid range Driver: 5.5″ cutout diameter

Tweeter: 1.797″ cutout diameter

Top Mount Depth: 2 – 1/4″

Focal Polyglass 170 V Component Speakers Manual Toyota Tundra

These speakers have been test fit to work in the front doors Toyota Tacoma 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014


Highlights:

  • 6-3/4″ component speaker system (includes 2 woofers, 2 tweeters, 2 crossover networks, and hardware)
  • Polyglass woofer with butyl rubber surround
  • aluminum/magnesium inverted dome tweeter
  • fiberglass/ABS basket
  • outboard crossover
  • grilles included
  • 6-60 watts RMS power range (120 watts peak)
  • frequency response: 60-20,000 Hz
  • sensitivity: 91 dB
  • depth: 2-1/4″

 

2-layer woofer cone and ABS basket The 170 V system features a 6-3/4″ woofer with a Polyglass cone that’s created by depositing a layer of hollow glass microbeads over a layer of cellulose pulp. This unique material combines the warm sound of cellulose with the incredible strength of glass, for a cone that responds rapidly with extremely low resonance. The basket is made from a fiberglass/ABS mixture, providing a non-magnetic, non-resonant housing that won’t color the sound. A butyl rubber surround helps control cone movement and promotes high power handling.

Aluminum/magnesium tweeter Focal designed the aluminum/magnesium inverted dome tweeter to disperse high frequencies evenly for a big, open soundstage. The external 2-way crossover ensures a smooth transition from lows to highs, so vocals and instruments sound natural. Grilles are included.