2018-2024 Toyota Camry Remote Turn On Harness Plug & Play Harness Sound Processor Factory Integration

Description

Upgrade your Camry Audio System in hours, not days, with this plug-and-play amplifier factory integration harness! und Processor. This harness is setup to provide a 12V constant power to your LOC/Sound Processor. It also includes Accessory Wire that will turn your aftermarket audio gear on / off.

Remote Turn On / 12V Constant Wires

RED = Accessory Remote Turn On/Turn Off

YELLOW = 12V Constant. This is used to power your LOC/DSP/SOUND PROCESSOR. DO NOT ATTEMPT TO POWER YOUR AMP / POWERED SUB WITH THIS WIRE.

NOTE: ALL amps / powered subwoofers will require fused power coming directly from your car battery. A relay MIGHT be required when using 2 or more amplifiers.

Example Installations:

Wiring Schematic:

Red Wire – Remote Turn on wire

Yellow Wire – Constant 12v (Do not use to power amps! this is for sound processors ONLY)

EXAMPLES:

PRODUCT TERMS:

This harness will provide 4 output channels (FL, RF, RL, RR) from my stock head unit. I understand that I will need to supply an LOC/DSP/Sound Processor that will properly output the desired 4, 5, or 6 channel low-level output that is required to provide the signal for my amplifiers.

I understand that not all LOC/DSP/Sound Processors may not work properly with my stock head unit (Radio).

I understand this product is NON REFUNDABLE if the product packaging is “opened”.  NO EXCEPTIONS.

I understand that support for this product is limited to ensuring signal delivery to your LOC/DSP/Sound Processor. We are unable to provide support for LOC/DSP/Sound Processors/Amplifiers purchased from other vendors.

NOTE: We suggest using NTUNE6 or a similar product designed to work with your Toyota Stock Stereo. Keep in mind lower end LOC units often cause “Newer Model” head unit errors and/or head unit “shutdown” issues.