2007-2021 Toyota Tundra (Front Door) Image Dynamics CXS64 Component Speaker Installation Kit



Toyota Tundra Front Door Image Dynamics CXS64 Component Speaker Installation Kit

If you are going to use an amp with at least 75 watts RMS to drive these speakers, the Image Dynamics CXS64 speakers are some of the best speakers you will find for under $1,000. We have put these against some high-end speakers that cost over $1,000 and these speakers are simply phenomenal for the money.  The New Chameleon CXS version 2 component separates are a truly innovative new speaker system. Their easy to change tweeter mounting allows you to choose the best mounting method for your vehicle. Installation versatility was only one of our goals when engineering the CXS separates. We set out to attain a level of fidelity that is unrivaled at any price. The result is a speaker system that provides superior resolution of details through the critical midrange and high frequencies with incredible dynamics and sonic realism. Their superior performance will be immediately apparent with your first listen of the CXS components.. Crossover with 250 volt metalized polypropylene capacitors air core inductors and 3 position tweeter level control. Toyota Tundra Image Dynamics CXS64 Component Speaker Installation Kit

This kit includes discounted pricing on the following items needed to install the Image Dynamics CXS64 speakers in the front doors of your Toyota Tundra:

2 – Image Dynamics CXS64 Mid Range Drivers

2 – Image Dynamics CXS64 28MM soft silk tweeters

2 – Image Dynamics Crossovers

This Kit Includes The Following:

2 – Image Dynamics CXS64 Mid Range Drivers

2 – Image Dynamics CXS64 28MM soft silk tweeters

2 – Image Dynamics Crossovers

2 – Heavy Duty Front door speaker adapters

Longer Bolt Kit: (Optional)

The heavy duty mounts are thicker than the factory speakers. You will need longer bolts to attach the mounts to your Toyota Tundra. These 10mm metric bolts / screws are not available in local hardware stores. Some customers have purchased larger screws at their local hardware store and were able to make them work. You might be able to save a few dollars if you can find a similar size that is not metric. We also include screws to mount your new aftermarket speakers to the speaker adapters. If you are not going to purchase the bolt kit, but sure you are not using screws that are too big.

Crossover Mounts: (Optional)

The crossover mounts hold your crossovers in place without any permanent modifications to your Tundra.

Speaker Wire Harness Kit: (Optional)

If you are planning to power your speakers with the stock wiring (using the stereo to power the speakers), you will want to add the speaker wire harness adapter kit to your order. This kit will allow you to plug into the the factory wiring without any cutting of splicing AND will make it much easier to return your Toyota Tundra back to factory if you ever trade in or sell. If you are planning to install an amplifier, you will be running heavier gauge speaker wire to your speakers so you will NOT need wire harnesses.

Sail Panels: (Optional)

The sail panels are pre-sized and ready for your installation. You won’t have to cut our modify your stock panels.

Tweeter Bypass Kit 2007-2013 ONLY : (Optional)

2007 – 2013 Toyota Tundras (Non JBL) are equipped with dash speakers that are wired in parallel to your front door speakers. If you remove your dash speakers, the door speakers will stop working.  Use these harnesses to allow signal to pass to door wire and then install your new tweeters in your sail panels.

Thank you for taking the time to check out our products for your Toyota Tundra. We sincerely appreciate the opportunity to do business with you!

Speaker Specs:

Mid Range Drivers: 

Frequency Responses: 65Hz – 25Khz

6.75″ Component Speakers

125 Watts RMS (each speaker / component set)

Sensitivity: 90db

Mounting Depth: 3″

Mounting Diameter: 5.6″


CXS64 tweeters

125 Watts RMS

Sensitivity: 90 db

Mounting Depth: .875″

Mounting Diameter: 2.03

NOTE: The included crossover MUST be used in the installation. Failure to use the crossover will result in speaker damage that is not covered under warranty. We have powered these speakers in show vehicles with 160 watts for over 7 hours of continuous play time. These are amazingly loud and clear. Be sure your amp is providing CLEAN power.

Manufacturer’s Warranty: 1 year.

How to install speakers in your Toyota Tundra:

Step by step picture installation

Toyota Tundra CXS64 Component Speakers Installation Kit
Toyota Tundra CXS64 Component Speakers Installation Kit

Additional information

Weight 12 lbs
Dimensions 24 × 12 × 6 in

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.




Continue as a Guest

Don't have an account? Sign Up

You may also like…