Description
Plug and Play add a subwoofer harness
This plug and play harness makes adding a subwoofer to your stock system fast and easy. No need to cut or splice your factor speaker wiring. Simply insert the plug behind the head unit (stereo) run the 19 foot leads to your amplifier or line out converter and you are ready to add some bass to your truck. Be sure to check out our plug and play amps for your Toyota Tacoma. They quickly take your stock system from 18 watts to 70 watts RMS to each speaker. In addition, our subwoofer amplifier will power your subs between 600 & 1000 watts RMS.
NOTE: Our plug and play amplifiers do not require a remote “turn-on” wire. Be sure to check that your amp or powered sub does not require the additional remote wire harness.
| WIRE COLOR | WIRE FUNCTION |
|---|---|
| Yellow | 12V Constant / Memory |
| Red | Switch / Accessory |
| Black | Ground |
| Blue | Antenna Remote |
| Blue with White Stripe | Amplifier Remote Turn-on |
| Orange with White Stripe | Dash Light Dimmer/Illumination |
| Green | Left Rear Speaker (+) |
| Green with Black Stripe | Left Rear Speaker (-) |
| White | Left Front Speaker (+) |
| White with Black Stripe | Left Front Speaker (-) |
| Purple | Right Rear Speaker (+) |
| Purple with Black Stripe | Right Rear Speaker (-) |
| Gray | Right Front Speaker (+) |
| Gray with Black Stripe | Right Front Speaker (-) |
Chris –
Would this sub amp harness paired with the remote turn on be all I need to add a sub besides the sub amp and amp wiring kit ?
Upvote if this was helpful (0) Downvote if this was not helpful (0) Watch Unwatch Flag for removal