Description
2014-2021 Toyota Tundra aftermarket stereo installation kit:
Do you want to install an Alpine, Clarion, JVC, Jensen, Kenwood, Pioneer, Sony, or other brand aftermarket head unit (stereo) in your 14+ Toyota Tundra, but you don’t want to lose the stock look of your truck? Not a problem! This kit was assembled to make installation quick and easy. Simply pick and choose the options below to complete your installation.
Dash Kit Adapter: (Included)
This is the actual face plate and brackets that look similar to your existing head unit in your Toyota Tundra. The colors MIGHT vary a bit, but if you look at your dash now in different lighting sources, you will see the color of the stock stereo does not exactly match the surrounding area. We have sold thousands of these kits with great feedback. This kit is setup to work with Single DIN or Double DIN aftermarket stereos.
Head units generally come in either single DIN (180 x 50 mm panel) or double DIN (180 x 100 mm panel) size. The depth is not standardized. The US standard for a DIN radio is 2″ x 7″ and the double DIN sized radio is a 4″ x 7″. Most manufacturers will provide the size (DIN) for our new head unit.
RCA Cables: (Optional)
If you are adding aftermarket amp(s) to your vehicle, you will need RCA cables for the input signal. We recommend using at least 17Ft length cables, so you have plenty of room to work with. These are 2Ch RCA cables. 2 Ch / Subwoofer amps will require 1 set. 4 Ch amps will require 2 sets. 5 Ch and Dual Amp set ups will require 3 sets.
