System 2 Packaged Audio System 2014+ Toyota Tundra CrewMax

(1 customer review)

$849.00

-

Out of stock

SKU: X2-PKGID_4 Category:

Description

2014+ Toyota Tundra CrewMax Packaged Audio System 2

For the last 10 years we have been installing systems in Toyota Tundras here in San Antonio. This package contains a pre-packaged audio system for your Toyota Tundra CrewMax. A number of our customers have requested a nice upgrade from the stock unit. This will provide a really nice upgrade over your stock system. Our best bang for buck system is the System 1B. If you have deeper pockets and looking for high end sound quality and super loud system be sure to check our our SQ1 packaged systems.

This package includes the following:

To keep your stock head unit (stereo) you will need the:

Plug and Play tacotunes.com EZ Amp integration system:

NOTE: Currently we do NOT have a mid level solution for our JBL customers. If you have a JBL system, be sure to check out our higher-end system(s) for your Toyota Tundra CrewMax.

The EZAMP bundle includes:

tacotunes EZAMP Plug and Play Amplifiers Picture
tacotunes EZAMP Plug and Play Amplifiers Picture

TXD3204v2 – tacotunes.com 4 channel amplifier 4 x 100 watts RMS to each speaker
TXD600.1– tacotunes.com mono subwoofer amp 600 x 1 RMS to sub(s)
1 – TXD6001 – Subwoofer Control Knob
1 – EZAMP Wire Harness System – direct integration into your Toyota Tundra CrewMax (NON JBL)

TXD Amp Installation Kit:

TXD Plug and Play Amp Power Kit
TXD Plug and Play Amp Power Kit

1 – tacotunes.com Mini ANL Fuse Holder
1 – tacotunes.com 4 gauge to 8 gauge distribution block
1 – 2.5′ 4 gauge tacotunes.com OFC – battery connection with terminal ring attached (red)
1 – 13′ 4 gauge tacotunes.com OFC – amplifier power wire (red)
2 – 10″ 8 gauge tacotunes.com OFC – amp power wire (red)
2 – 24″ 8 gauge tacotunes.com OFC – amplifier ground wire with ring terminals attached (black)
1 – 100 amp Mini ANL BLUE Fuse (battery)
1 – 60 amp Mini ANL YELLOW Fuse (TXD10001 Amp)
1 – 40 amp Mini ANL ORANGE use (TXD6001 Amp)
1 – 30 amp Mini ANL RED Fuse (TXD3204 Amp)
1 – 10MM grounding bolt
1 – 5/16″ self tapping grounding bolt
20 – cable ties
1 – 6′ 3/8″ split loom
1 – 3′ 1/4″ split loom
2 – #8 x 5/8 Black Screw

Front Door Speakers (Driver & Passenger):

PowerBass S-60C Component Speakers

PowerBass S-60C Component Speakers
PowerBass S-60C Component Speakers

The following items are included with this bundle set:

2 -PowerBass S-60C 6.5″”  Component Speakers, Tweeters & Crossovers

2 – Front Door Speaker Mounts

2 – Wire Harness Adapters

2 -40″ 16G speaker wire – Red / Black

2 – 40″ 188G tweeter wire – Red / Black

Rated at 70 watts (RMS) / 210 Watts Peak – use RMS numbers to rate speakers. Peak ratings are not realistic.

Rear Door Speakers (Driver & Passenger):

PowerBass S-6502 Coaxial Speaker 6.5 inch
PowerBass S-6502 Coaxial Speaker 6.5 inch

2 – Power Bass S-65 Coaxial Speakers

The following items are included with this bundle set:

2 -PowerBass S-60 6.5″”  Coaxial

2 – Rear Door Speaker Mounts

2 – Wire Harness Adapters

Rated at 45 watts (RMS) / 150 watts peak – – use RMS numbers to rate speakers. Peak ratings are not realistic.

 

tacotunes.com single 10″ Subwoofer Box Loaded

2014+ Toyota Tundra Subwoofer Box

The following is included in this bundle set:

1 – tacotunes.com 10″ subwoofer box (Naked Box, Does NOT have LineX Coating)

1 – PowerBass 10″ D4 Ohm Subwoofer to match the output on TXD6001 EzAmp (600 watts output)

1 – terminal cup

1 – subwoofer wiring kit

NOTE: The subwoofers will be wired at 2 ohm load. This amp can produce more power than the subwoofer(s) can handle.  Please see our instructions on how to set the amplifier’s maximum output. Subwoofers that are overdriven and show signs of burnt voice coils will NOT be covered under warranty. Be sure you follow install instructions. There are NO exceptions. If you want TONS of bass, check our our higher end systems.

We recommend sealing the box for best sound quality. Due to lack of air space behind the seats in your Tundra, this subwoofer does not perform as well in ported setup. If you are looking for a lot of bass then you can leave ported. If you are looking for more sound quality, then we recommend sealing the enclosure.

 NOTE:

  1. The subwoofer box is naked. NOT Sprayed with LineX.
  2. The speaker crossover mounts are not included, you will need to use zip ties to hold them in place.You can purchase separately.
  3. The budget mounts are used in lieu of heavy duty mounts.
  4. Amplifier rack is NOT included. You can purchase separately.

CLICK HERE INSTALLATION INSTRUCTIONS:

Additional information

Weight 59 lbs
Dimensions 50 × 22 × 13 in

Share your thoughts!

5 out of 5 stars

1 review

Let us know what you think...

0 reviews with a 2-star rating

There are no reviews with a 2-star rating yet

×

Login

Register

Continue as a Guest

Don't have an account? Sign Up