A HUGE thank you to Troy for making the trip out to our shop from HOUSTON, Texas. A 6 hour round trip!
Vehicle
2024 Toyota Tundra Platinum Hybrid
Posted
July 2024
Shop
Taco Tunes, San Antonio, TX
Troy could not tolerate the factory audio in his 2024 Platinum, and although our 2022+ Tundra HYBRID enclosures are not yet available, he was desperate for an audio system upgrade.
So… We got him set up with new door speakers and a temporary subwoofer solution to meet his needs until our TacoTunes hybrid sub enclosure is completed!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Install photos
Tacotunes.com TT65cs Front Door mid bass driver. Designed to work with your A-Pillar tweeter, the crossover network is mounted to the amp rack located on the rear wall of your Tundra. A true component setup! Don’t settle for OEM style or low-end coaxial speakers!Our amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!The JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth.and 100% plug and play. Requiring ZERO cutting or splicing of your factory wiring.Tacotunes.com TT65cs direct fit silk dome tweeters produce the crisp, clear highs that that perform amazingly well at all listening levels. These tweeters are part of a true component speaker system that connects to the included crossover network.
Quickly & Easily installed in the factory mounting location of your A-pillar, our clip-in tweeter mounts fit seamlessly with ZERO cutting or modifications needed.Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.The TT65 tweeter seamlessly integrates into your factory location using our custom clip-in mount, requiring absolutely no modifications. This ensures a secure and factory-looking upgrade, making it easy to enhance your sound without compromising the look of your Tundra’s interior.TT65 rear door crossover network is mounted using our laser cut crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersDirect tundra integration… Keep your Factory Stereo (JBL Head Unit) and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Tacotunes 2022+ Tundra rear wall amp rack assembled and waiting to be installed!2022+ JBL Equipped Tundra Audio UpgradeTacotunes JBL tundra front door crossover network is mounted to the amp rack on your rear wall. The crossover network is responsible for directing the proper frequency to the new tweeters in the A-Pillar and the mid bass drivers in the front door. Don’t settle for low end OEM style or coaxial speakers.Plug & Play Harness Connections.
Frequently asked questions
Is there a subwoofer box that fits the Hybrid Tundra?
Yes. Our Hybrid Tundra subwoofer enclosures are custom molded to fit behind the rear seat of the 2022+ Hybrid Tundra while keeping your under-seat storage.
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Do customers really drive hours for a Taco Tunes install?
Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.
Improper 2024 Toyota Tundra Audio Installations: A Cautionary Tale . . DON’T LET AUDIO SHOPS HACK UP YOUR TUNDRA!
Vehicle
2024 Toyota Tundra
Posted
July 2024
Shop
Taco Tunes, San Antonio, TX
Body:
We’ve observed an unfortunate trend of cost-cutting measures employed by some audio shops during Toyota Tundra audio system installations. These practices, often marketed under the guise of “affordable upgrades,” can lead to long-term problems for tundra owners.
Common Cost-Cutting Practices and Their Consequences:
Wire Splicing and Cutting: Tampering with factory wiring harnesses by cutting and splicing can compromise the vehicle’s electrical system and lead to malfunctions. Improper Mounting: Drilling holes for component installation directly into the vehicle’s body can create potential rust points and compromise structural integrity. Incorrect Signal Extraction: Extracting audio signal through improper methods can degrade sound quality and introduce unwanted noise. Our Commitment to Quality Installations:
At our establishment, we prioritize the use of:
Plug-and-Play Harnesses: These eliminate the need for wire cutting or splicing, ensuring a secure and reliable connection to the factory wiring system. Vehicle-Specific Installation Kits: We utilize kits designed specifically for the Toyota Tundra, eliminating the need for drilling and ensuring proper fitment. High-Fidelity Signal Integration: Our installation methods extract the cleanest possible audio signal from the factory head unit, resulting in superior sound quality.
Aborted System 1B Audio System Installation Report
Service Description
Installation of System 1B audio system into the above vehicle.
Pre-Existing Conditions
• The main 30-pin JBL amplifier harness located under the driver’s seat exhibited evidence of prior repairs. These repairs utilized butt connectors, which were not properly sealed. Additionally, several wires (approximately 6-8) had undergone multiple butt splice repairs on the same conductor. The repairs used 16-gauge speaker wire for extensions, and all 30 wires were poorly wrapped with electrical tape after splicing/tapping for signal.
• Front door speaker harnesses were cut and repaired with butt connectors.
• The passenger rear door speaker wire (extension used for repair) was pinched between the speaker mount and the door panel, causing exposed copper to ground against the chassis. This grounded the right rear channel, triggering the amplifier to shut down the rear channels.
• T-taps were used to provide signal to the rear speakers. The original rear door speaker harnesses were completely missing and could not be located/salvaged for repair.
• The rear door speakers were secured with drywall screws instead of the original mounting hardware. These screws also required drilling new holes into the door panels.
• The stock JBL subwoofer was not properly secured against the rear air vent, creating a roughly half-inch gap that could allow moisture into the vehicle cabin.
• Modifications were observed on the rear seat frame/structure.
• The head unit wiring appeared to be original and unmodified.
• A-pillar tweeters, dash speakers, and rear door tweeters appeared to have original and unmodified wiring.
Repairs Performed
1. 30-Pin Harness Replacement: A new 30-pin harness plug was installed. The original harness, which had a broken locking tab, was removed. All 30 connections were soldered and heat-shrink wrapped to ensure proper functionality.
2. Amplifier Operation: The amplifier exhibited intermittent power issues (fading in and out). While the exact cause cannot be definitively confirmed, it is believed that the previously shorted speaker wire on the rear door was the culprit.
3. Head Unit Verification: The head unit was removed and inspected. It appeared to be original and unmodified.
4. Front Door Harnesses: Due to the limited remaining wire length, repairs to the front door harnesses were not possible.
5. Subwoofer Gap: No attempt was made to repair the gap between the subwoofer and the rear air vent. It appeared that some mounting bolts were missing.
6. Installed rear door speakers with factory mounting screws.
Additional Notes
• A small rubber gasket was missing on the passenger rear door.
Recommendations
• Further investigation into the cause of the amplifier’s intermittent operation may be necessary.
• Replacement of the front door speaker harnesses is recommended for optimal audio performance and system integrity.
• Addressing the gap between the subwoofer and the rear air vent is recommended to prevent potential moisture ingress.
• Replacing the missing gasket on the passenger rear door is recommended to maintain proper weatherproofing.
• Rear Seatbelt has incorrect bolt . . . this is an URGENT repair. NOTE: This was noted during the repairs as a pre-existing condition.
Repair time: 4 hours
Parts: 30PIN Stock JBL Harness (meets or exceeds OE standards), solder connections, black wrap, stock speaker mounting bolts.
Summary: System was operating normally when customer departed.
Install photos
2024 Toyota TundraMissing installation bolts, drywall screws & holes drilled into the door panels.Missing partsattempted harness repairsShorted (pinched) wire was causing system to fade in / outbutt connectors and wire extensions
Frequently asked questions
Why shouldn’t an audio shop splice my Tundra’s factory wiring?
Cutting or splicing factory wiring can damage JBL components and create problems that are expensive to repair. We repair a large number of JBL-equipped Toyotas for this reason, and there is no need to cut anything with plug-and-play harnesses.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
A HUGE thank you to Anthony for making the trip out to our shop a SECOND time!
Vehicle
2024 Toyota Tundra JBL
System
System 1B
Posted
July 2024
Shop
Taco Tunes, San Antonio, TX
Anthony had us install our system 1 in his 2015 tundra last year. After upgrading to a 2024 tundra he was NOT impressed by the JBL system.
So…. we got his new 2024 crew max set up with our 2022+ JBL Tundra system 1B with COMPLETE sound deadener matting, and he was all smiles!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; Image Dynamics ID10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!
Install photos
Our System 1B includes dual 10” subwoofers in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Our Tacotunes.com dual 10” subwoofer box fits like a glove behind your rear seat! Don’t give up your under-seat storage when you can keep it AND enjoy your music!Our amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!3 Upgraded dash speakers!Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.Tacotunes JBL tundra front door crossover network is mounted to the amp rack on your rear wall. The crossover network is responsible for directing the proper frequency to the new tweeters in the A-Pillar and the mid bass drivers in the front door. Don’t settle for low end OEM style or coaxial speakers.A closer look at tacotunes TT65cs rear door midbass driverThe TT65 tweeter seamlessly integrates into your factory location using our custom clip-in mount, requiring absolutely no modifications. This ensures a secure and factory-looking upgrade, making it easy to enhance your sound without compromising the look of your Tundra’s interior.
Frequently asked questions
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
A HUGE thank you to Yunieski for making the trip to our shop from FLORIDA!
Vehicle
2024 Toyota Tundra CrewMax
System
System 1B
Customer from
Florida
Posted
June 2024
Shop
Taco Tunes, San Antonio, TX
Yunieski was very disappointed with the audio system in his 2024 Crew max. So.. We got him set up with our system 1B!
He was STUNNED by the MAJOR upgrade in his Tundra’s audio!
The system 1B that includes the following
2022+ Tundra Factory Integration System: 3 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.; NTUNE6 – LOC / Audio leveler & Bass Enhancement module
Front Door Component Speakers: Tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Mid bass Drivers -100 Watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com Dash Speaker Wire Harness Adapters; Tweeters Installed in dash location using tweeter adapters.
Rear Door Components: Tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Mid bass drivers Handles -100 watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Tweeter Harness Adapters; Tweeters will fit in stock door location
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD1000.1 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; Image Dynamics ID10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!
Install photos
Our Tacotunes.com dual 10” subwoofer box fits like a glove behind your rear seat! Don’t give up your under-seat storage when you can keep it AND enjoy your music!Our System 1B includes dual 10” subwoofer in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Tacotunes.com TT65cs Front Door Component Speakers. Designed to work with your dash tweeter, you can see the crossover network on the floor that will be hidden under the front kick panel. A true component setup in your Tundra. Don’t settle for OEM style or low-end coaxial speakers.A closer look at TT65cs front door midbass driverTacotunes TT65cs front door mid bass driver compared to the Tundra OEM front door speakerTacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersLaser Cut / CNC Bent Amp Rack. Bolts behind your rear seat on your passenger side with a stock mounting location. Don’t let audio shops drill holes in your new Tundra! Tacotunes.com TXD1001 Subwoofer amp and TXD3204v 4 channel amp, mounted to rear wall using stock mounting location (bolts).The NTUNE6 is designed to keep your stock stereo and add aftermarket amplifiers(s) to your Toyota Tundra. When Toyota added Android Auto & Apple Car play to your Tundra, the bass and audio signal coming from the stock stereo was significantly reduced. This created many problems with bass output and speaker level output.TacoTune’s rear wall Tundra amp rack assembled and ready to be installedDirect tundra integration… Keep your stock head unit and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Keep under your hood clean from those loose single fuses with our Laser Cut / CNC Bent Fuse Holder Bracket! Makes adding aftermarket electrical upgrades MUCH easier AND organized!
Frequently asked questions
Do customers really drive hours for a Taco Tunes install?
Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
A HUGE thank you to Leo for making the trip to our shop!
Vehicle
2024 Toyota Tundra CrewMax
System
System 1
Posted
June 2024
Shop
Taco Tunes, San Antonio, TX
He was very disappointed with the sound quality of the OEM system in his 2024 Crew max. So.. We got him set up with our system 1!
He was SHOCKED by the MAJOR upgrade in his Tundra’s audio!
tacotunes.com System 1
Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters
Rear Door Components: TT65CS rear door components.; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters will fit in stock door location.
Amp: tacotunes.com TXD1000.5 5 channel amplifier; 75 watts to each door speaker & 350 watts (RMS) to your subwoofer
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Single 10″ subwoofer
Install photos
Our Tacotunes.com Single 10″ subwoofer box fits like a glove behind your rear seat on the passenger side! Don’t give up your under-seat storage when you can keep it AND enjoy your music!Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersThe crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakers.A closer look at tt65cs rear door midbass driverTacotunes.com TT65cs Front Door Component Speakers. Designed to work with your dash tweeter, you can see the crossover network on the floor that will be hidden under the front kick panel. A true component setup in your Tundra. Don’t settle for OEM style or low-end coaxial speakers.Keep your stock head unit: Direct tundra integration… Keep your stock head unit and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.The NTUNE6 is designed to keep your stock stereo and add aftermarket amplifiers(s) to your Toyota Tundra. When Toyota added Android Auto & Apple Car play to your Tundra, the bass and audio signal coming from the stock stereo was significantly reduced. This created many problems with bass output and speaker level output.A closer look at tt65cs front door midbass driverKeep under your hood clean from those loose single fuses with our Laser Cut / CNC Bent Fuse Holder Bracket! Makes adding aftermarket electrical upgrades MUCH easier AND organized!Laser Cut / CNC Bent Amp Rack. Bolts behind your rear seat on your passenger side with a stock mounting location. Don’t let audio shops drill holes in your new Tundra! Tacotunes.com TXD1005 Subwoofer amp mounted to rear wall using stock mounting location (bolts).Love these trucks!
Frequently asked questions
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
Can a Taco Tunes system be added when I buy a new Tundra?
Yes. Many of our systems are rolled into new vehicle financing, and we often install Tundra audio systems for dealers before trucks reach the lot.
A HUGE thank you to DJ for making the trip out to our shop a SECOND time!
Vehicle
2024 Toyota Tundra JBL
System
System 1B
Posted
June 2024
Shop
Taco Tunes, San Antonio, TX
DJ was NOT impressed by the JBL system in his 2024 Toyota tundra
Prior to coming into the shop he took the liberty of doing a sound deadener upgrade. Once his truck was in our hands we got him set up with our 2022+ JBL Tundra system 1B and he was all smiles!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; Image Dynamics ID10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!
Install photos
The 2022+ JBL Equipped Tundras are starting to roll in!TacoTunes rear wall amp rack and dual 10″ subwoofer enclosure allow you to keep all the storage underneath your rear seat!Our System 1B includes dual 10” subwoofers in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.A closer look at Tacotunes TT65cs rear door midbass driverThe JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth.and 100% plug and play. Requiring ZERO cutting or splicing of your factory wiring.TacoTunes J.A.R.V.I.S Integration system hides underneath your factory amplifierOur amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.TacoTunes clip in tweeter mount allows our TT65cs tweeters to seamlessly mount into the factory location of you tundraTT65 rear door crossover network is mounted using our laser cut crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersThe TT65 tweeter seamlessly integrates into your factory location using our custom clip-in mount, requiring absolutely no modifications. This ensures a secure and factory-looking upgrade, making it easy to enhance your sound without compromising the look of your Tundra’s interior.Tacotunes.com TT65cs Front Door mid bass driver. Designed to work with your A-Pillar tweeter, the crossover network is mounted to the amp rack located on the rear wall of your Tundra. A true component setup! Don’t settle for OEM style or low-end coaxial speakers!
Frequently asked questions
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
A HUGE thank you to Omar for making the trip to our shop from HOUSTON, Texas. A SIX HOUR round trip!
Vehicle
2022+ Toyota Tundra CrewMax
System
System 1B
Customer from
Houston
Posted
June 2024
Shop
Taco Tunes, San Antonio, TX
He was very disappointed with the audio system in his 202 Crew max. So.. We got him set up with our system 1B!
He was STUNNED by the MAJOR upgrade in his Tundra’s audio!
The system 1B that includes the following
2022+ Tundra Factory Integration System: 3 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.; NTUNE6 – LOC / Audio leveler & Bass Enhancement module
Front Door Component Speakers: Tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Mid bass Drivers -100 Watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com Dash Speaker Wire Harness Adapters; Tweeters Installed in dash location using tweeter adapters.
Rear Door Components: Tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Mid bass drivers Handles -100 watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Tweeter Harness Adapters; Tweeters will fit in stock door location
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; Image Dynamics ID10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!
Install photos
Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.Tacotunes.com TT65cs Front Door Component Speakers. Designed to work with your dash tweeter, you can see the crossover network on the floor that will be hidden under the front kick panel. A true component setup in your Tundra. Don’t settle for OEM style or low-end coaxial speakers!Our amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! PLUS our amp bolts to the amp rack for a stock appearance and a secure mounting solution. PLUS with our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!
Frequently asked questions
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
Do customers really drive hours for a Taco Tunes install?
Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
A HUGE thank you to Joseph for making the trip out to our shop!
Vehicle
2023 Toyota Tundra JBL
System
System 1B
Posted
May 2024
Shop
Taco Tunes, San Antonio, TX
Joseph was not impressed by the JBL system in his 2023 Toyota tundra. So… we got him set up with our 2022+ JBL Tundra System 1B, and he was all smiles!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; Image Dynamics ID10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!
Install photos
2023 Toyota Tundra 1794 COMPLETE audio system upgrade!The JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth.and 100% plug and play. Requiring ZERO cutting or splicing of your factory wiring.Our amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!Our Tacotunes.com dual 10” subwoofer box fits like a glove behind your rear seat! Don’t give up your under-seat storage when you can keep it AND enjoy your music!Tacotunes.com TT65cs Front Door mid bass driver. Designed to work with your A-Pillar tweeter, the crossover network is mounted to the amp rack located on the rear wall of your Tundra. A true component setup! Don’t settle for OEM style or low-end coaxial speakers!Tacotunes.com TT65cs direct fit silk dome tweeters produce the crisp, clear highs that that perform amazingly well at all listening levels. These tweeters are part of a true component speaker system that connects to the included crossover network.
Quickly & Easily installed in the factory mounting location of your A-pillar, our clip-in tweeter mounts fit seamlessly with ZERO cutting or modifications needed.Left, Right & Center Dash Replacement SpeakersA closer look at tacotunes TT65cs front door mid bass driverTacotunes JBL tundra front door crossover network is mounted to the amp rack on your rear wall. The crossover network is responsible for directing the proper frequency to the new tweeters in the A-Pillar and the mid bass drivers in the front door. Don’t settle for low end OEM style or coaxial speakers.Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.
Frequently asked questions
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
A HUGE thank you to Rudy for making the trip to our shop!
Vehicle
2023 Toyota Tundra
System
System 1
Posted
May 2024
Shop
Taco Tunes, San Antonio, TX
Rudy was disappointed with the factory audio in his 2023 Tundra…. So, we got him set up with our System 1 with COMPLETE sound deadener matting!
tacotunes.com System 1
Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters
Rear Door Components: TT65CS rear door components.; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters will fit in stock door location.
Amp: tacotunes.com TXD1000.5 5 channel amplifier; 75 watts to each door speaker & 350 watts (RMS) to your subwoofer
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Single 10″ subwoofer
Install photos
Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersOur Tacotunes.com Single 10″ subwoofer box fits like a glove behind your rear seat on the passenger side! Don’t give up your under-seat storage when you can keep it AND enjoy your music!Tacotunes.com TT65cs Front Door Component Speakers. Designed to work with your dash tweeter, you can see the crossover network on the floor that will be hidden under the front kick panel. A true component setup in your Tundra. Don’t settle for OEM style or low-end coaxial speakers!A closer look at the TT65cs rear door midbass driverThe crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakers.Laser Cut / CNC Bent Amp Rack. Bolts to factory mounting location. Don’t let audio shops drill holes in your new Tundra!
Laser Cut / CNC Bent Amp Rack. Bolts to factory mounting location. Don’t let audio shops drill holes in your new Tundra! Tacotunes.com TXD3204v3 4 Channel Amp, TXD10001Keep your stock head unit: Direct tundra integration… Keep your stock head unit and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Passenger front door panel removed
Frequently asked questions
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
Huge shoutout to Tim and Terri for driving all the way down from Sugar Land! That’s a 6-hour round trip – wow! We really appreciate y’all making the drive!
Vehicle
2022+ Toyota Tundra JBL
System
System 1B
Posted
April 2024
Shop
Taco Tunes, San Antonio, TX
An audiophile at heart (having upgraded many systems), Tim knew the stock JBL audio in his new Tundra would be quickly replaced. Our Facebook page provided the information and the path! The challenge was, how do I keep the stock head unit and upgrade all my speakers and add subwoofer(s)?
Audio System Summary:
During his visit to our shop, we installed our 2022+ Tundra JBL System 1B direct integration / plug and play audio system.
How the Taco Tunes system installs
Tacotunes’ plug-and-play JBL integration system communicates directly with your stock stereo (head unit) via your Toyota Tundra’s AVC LAN (similar to CAN BUS) interface.
By obtaining the PRE-AMP audio signal (before the stock JBL amplifier), the interface delivers the cleanest audio signal – possible- to your aftermarket amplifiers. There is ZERO need for old school channel summing methods used in the past.
Unmatched audio clarity at ALL listening levels! Crystal-clear highs, well-defined mids, and that rich, deep powerful bass you have been craving for is now available!
JBL Tundra Component Speaker package
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; Image Dynamics ID10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!
Install photos
Thank you Tim & Terri! 🙂Sub Preinstall 2022 POWER SEATS-
Our System 1B includes dual 10” subwoofers in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.A-Pillar tweeter replacement–
Tacotunes.com TT65cs direct fit silk dome tweeters produce the crisp, clear highs that that perform amazingly well at all listening levels. These tweeters are part of a true component speaker system that connects to the included crossover network.
Quickly & Easily installed in the factory mounting location of your A-pillar, our clip-in tweeter mounts fit seamlessly with ZERO cutting or modifications needed.Front Mid bass Drivers –
Tacotunes.com TT65cs Front Door mid bass driver. Designed to work with your A-Pillar tweeter, the crossover network is mounted to the amp rack located on the rear wall of your Tundra. A true component setup! Don’t settle for OEM style or low-end coaxial speakers!Front door crossover network
Tacotunes JBL tundra front door crossover network is mounted to the amp rack on your rear wall. The crossover network is responsible for directing the proper frequency to the new tweeters in the A-Pillar and the mid bass drivers in the front door. Don’t settle for low end OEM style or coaxial speakers.Stock JBL Amp – located under driver seat.The JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth.AMP RACK-
Our amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!Rear door component speaker system-
Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.REAR DOOR TWEETERS-
The TT65 tweeter seamlessly integrates into your factory location using our custom clip-in mount, requiring absolutely no modifications. This ensures a secure and factory-looking upgrade, making it easy to enhance your sound without compromising the look of your Tundra’s interior.
TT65 rear door crossover network is mounted using our laser cut crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersLeft, Right & Center Dash Replacement Speakers
Frequently asked questions
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
Do customers really drive hours for a Taco Tunes install?
Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.
A HUGE thank you to San Marcos Toyota for making the trip to our shop to have our System 1 Installed in this 2024 Tundra… with the sticker still on the window!
Vehicle
2024 Toyota Tundra
System
System 1
Posted
April 2024
Shop
Taco Tunes, San Antonio, TX
tacotunes.com System 1
Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters
Rear Door Components: TT65CS rear door components.; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters will fit in stock door location.
Amp: tacotunes.com TXD10005 5 channel amplifier; 75 watts to each door speaker & 350 watts (RMS) to your subwoofer
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Single 10″ subwoofer
Install photos
Our System 1A includes a single 10” subwoofer in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.
NOTE: You can also see the 5 Channel amp that is powering the front door speakers and subwooferTacotunes.com TT65cs Front Door Component Speakers. Designed to work with your dash tweeter, you can see the crossover network on the floor that will be hidden under the front kick panel. A true component setup in your Tundra. Don’t settle for OEM style or low-end coaxial speakers!Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersThe crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakers.Laser Cut / CNC Bent Amp Rack. Bolts behind your rear seat on your passenger side with a stock mounting location. Don’t let audio shops drill holes in your new Tundra! Tacotunes.com TXD1005 Subwoofer amp mounted to rear wall using stock mounting location (bolts).Keep under your hood clean from those loose single fuses with our Laser Cut / CNC Bent Fuse Holder Bracket! Makes adding aftermarket electrical upgrades MUCH easier AND organized!Keep your stock head unit: Direct tundra integration… Keep your stock head unit and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.
Frequently asked questions
Can a Taco Tunes system be added when I buy a new Tundra?
Yes. Many of our systems are rolled into new vehicle financing, and we often install Tundra audio systems for dealers before trucks reach the lot.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
A HUGE thank you to Marco for making the trip to our shop from Beaumont, TX!
Vehicle
2023 Toyota Tundra CrewMax
System
System 1B
Posted
March 2024
Shop
Taco Tunes, San Antonio, TX
He was very disappointed with the sound quality of the OEM system in his 2023 Crew max. So.. We got him set up with our system 1B!
The system 1B that includes the following
2022+ Tundra Factory Integration System: 3 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.; NTUNE6 – LOC / Audio leveler & Bass Enhancement module
Front Door Component Speakers: Tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Mid bass Drivers -100 Watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com Dash Speaker Wire Harness Adapters; Tweeters Installed in dash location using tweeter adapters.
Rear Door Components: Tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Mid bass drivers Handles -100 watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Tweeter Harness Adapters; Tweeters will fit in stock door location
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; Image Dynamics ID10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!
Install photos
Our System 1B includes dual 10” subwoofer in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Tacotunes.com TT65cs Front Door Component Speakers. Designed to work with your dash tweeter, the crossover network will be hidden under the front kick panel. A true component setup in your Tundra. Don’t settle for OEM style or low-end coaxial speakers!Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersTacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.Direct tundra integration… Keep your stock head unit and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Our Tacotunes.com dual 10” subwoofer box fits like a glove behind your rear seat! Don’t give up your under-seat storage when you can keep it AND enjoy your music!Laser Cut / CNC Bent Amp Rack. Bolts behind your rear seat on your passenger side with a stock mounting location. Don’t let audio shops drill holes in your new Tundra! Tacotunes.com TXD1001 Subwoofer amp and TXD3204v 4 channel amp, mounted to rear wall using stock mounting location (bolts).
Frequently asked questions
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
Do customers really drive hours for a Taco Tunes install?
Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.