A HUGE thank you to David for making the trip out to our shop!
Vehicle
2023 Toyota Tundra JBL
System
System 1B
Posted
October 2024
Shop
Taco Tunes, San Antonio, TX
David could not tolerate the factory audio in his 2023 Tundra. So… We got him set up with our 2022+ JBL Tundra system 1B!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Our amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!Our Tacotunes.com dual 10” subwoofer box fits like a glove behind your rear seat! Don’t give up your under-seat storage when you can keep it AND enjoy your music!Tacotunes.com TT65cs Front Door mid bass driver. Designed to work with your A-Pillar tweeter, the crossover network is mounted to the amp rack located on the rear wall of your Tundra. A true component setup! Don’t settle for OEM style or low-end coaxial speakers!Power wire ran to Tacotunes rear wall amp rack, and Tacotunes TT5cs front door midbass driver waiting to be installedTacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakers
Frequently asked questions
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
A HUGE thank you to Eleazar for making his way out to our shop!
Vehicle
2018 Toyota Tundra CrewMax
System
System 1B
Posted
October 2024
Shop
Taco Tunes, San Antonio, TX
Eleazar was ITCHING for more bass in his 2018 Tundra… So, We installed our system 1b in his 2018 crewmax and he was nothing but smiles after hearing his new upgrade!
How the Taco Tunes system installs
Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results! In 2020 Tundra’s come equipped from the Factory Apple Car Play / Android Auto.
TacoTunes’ complete system is plug and play, completely reversible AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.
Our audio system will work with your stock stereo and most aftermarket head units.
tacotunes.com System 1B
Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters; tacotunes.com sail panels with tacotunes tweeters
Rear Door Components: TT65CS rear door components.; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters will fit in stock door location.
Amp: tacotunes.com TXD3204v2 Four channel amplifier; Tacotunes.com TXD100.1 Subwoofer amp; 100 watts x 4 to each speaker and 1000 x 1 (subwoofers)
Our Tacotunes.com dual 12” subwoofer box fits like a glove behind your rear seat! No need to settle for shallow sounding shallow mount subwoofers!Our TacoTunes Laser Cut / CNC Bent Amp Rack bolts to your factory mounting location under your passenger seat. Don’t let anyone drill holes in your baby!
Mounted to the stock mounting locations are the TXD3204v 4 channel amp and TXD1001 subwoofer amp. Using our plug and play harness which is connected to your head unit, these amps provide your new speakers and subwoofer(s) with the power they need for you to have the most ideal listening experience.TT65cs tweeters are mounted in our sail panels. They consist of complete plug and play wiring, which requires ZERO cutting and splicing of your factory wires, making their installation 100% reversible. Tweeter audio frequencies are HIGHLY directional. For the best listening experience, we suggest placing these up high and out of the way where nothing can block the higher frequencies.The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door in the rear door. Don’t settle for low end OEM style!
New tweeter installed in stock door location.A closer look at the TT65cs Rear door midbass driverOur Tundra direct integration system will provide astonishing sound quality and allow you to keep your stock head unit. Most of our customers do not want to change their head unit. However, if you later decide to upgrade, our amps are designed to work with just about any aftermarket option. Whether you keep your stock one, or go aftermarket, our tundra direct integration plug and play harness will require NO cutting or splicing any of your factory wiring. The installation can be easily 100% reversed back to OEM equipment… Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Rear seat removed and ready for the sub enclosure!Keep under your hood clean from those loose single fuses with our Laser Cut / CNC Bent Fuse Holder Bracket! Makes adding aftermarket electrical upgrades MUCH easier AND organized!
Frequently asked questions
Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?
Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
A HUGE thank you to Hector for making his way out to our shop!
Vehicle
2020 Toyota Tundra
System
System 1A
Posted
October 2024
Shop
Taco Tunes, San Antonio, TX
Hector came to us unsatisfied with his 2020 Tundra’s audio system after he upgraded his head unit.
So, we got him set up with our system 1A with COMPLETE sound deadener!
How the Taco Tunes system installs
Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results!
Our complete system is plug and play completely reversible ( ZERO cutting and splicing of stock wires) AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.
Our audio system will work with your stock stereo and most aftermarket head units.
Rear Door Components: TT65CS rear door components.; Tacotunes.com speaker mounts; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters mounted in stock location.
Amp: tacotunes.com TXD1000.5 – 5 channel amplifier; 75 watts to each door speaker & 350 watts (RMS) to your subwoofer
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Single 12″ subwoofer
Install photos
Our Tacotunes.com single 12” subwoofer box fits like a glove behind your rear seat!Tacotunes.com TT65cs Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. Our TT65cs consist of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels. The laser cut crossover mount provides a secure mounting location. There is no need to settle for OEM style speakers AND do NOT recommend using mis-matched coaxial speakers.Component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or low-end coaxial speakersThe crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door in the rear door. Don’t settle for low end OEM style!
New tweeter installed in stock door location.Our TacoTunes Laser Cut / CNC Bent Amp Rack bolts to your factory mounting location under your passenger seat. No need to drill holes in your baby!
Mounted to our amp rack is our TXD1005 5 channel amp. This amp is used to power a SINGLE subwoofer, speakers and tweeters. Using our plug and play harness which is connected to your head unit and stock wiring, it provides your new speakers and subwoofer with the power they need to give you the best listening experience!Our Tundra direct integration system will provide astonishing sound quality and allow you to keep your stock head unit. Most of our customers do not want to change their head unit. However, if you later decide to upgrade, our amps are designed to work with just about any aftermarket option. Whether you keep your stock one, or go aftermarket, our Tundra direct integration plug and play harness will require NO cutting or splicing any of your factory wiring. The installation can be easily 100% reversed back to OEM equipment… Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Rear wall matted and ready for the subwoofer enclosure!
Frequently asked questions
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
Will a Taco Tunes system work with an aftermarket head unit?
Yes. Our systems work with the stock stereo and most aftermarket head units, so you can upgrade the screen now or later.
Why do 2020 and newer Tundras need an LOC?
Starting in 2020, Tundras came with factory Apple CarPlay and Android Auto. Adding amplifiers to those head units requires a line output converter (LOC), so the equipment is slightly different from 2007-2019 trucks.
A HUGE thank you to Felipe for making his way out to our shop !
Vehicle
2021 Toyota Tundra CrewMax
Posted
September 2024
Shop
Taco Tunes, San Antonio, TX
Felipe was ITCHING for more bass in his 2021 Tundra… so he purchased a system we recently de-installed from a customer who traded their truck in. We installed it in his 2021 crewmax and he was nothing but smiles after hearing his new upgrade!
How the Taco Tunes system installs
Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results! In 2020 Tundra’s come equipped from the Factory Apple Car Play / Android Auto.
TacoTunes’ complete system is plug and play, completely reversible AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.
Our audio system will work with your stock stereo and most aftermarket head units.
tacotunes.com System
Front Door Component Speakers: tacotunes.com CXS64 Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; CXS64 Mid bass Drivers -150 Watts RMS; CXS64 Crossovers; CXS64 Tweeters; tacotunes.com sail panels with tacotunes tweeters
Rear Door Components: 6.5 Inch 4 Ohm 80 Watts RMS OEM Replacement Coaxial Speakers
Amp: tacotunes.com TXD3204v2 Four channel amplifier; Tacotunes.com TXD100.1 Subwoofer amp; 100 watts x 4 to each speaker and 1000 x 1 (subwoofers)
Our Tacotunes Fiberglass subwoofer enclosure provides MAXIMUM air space behind your rear seat. Allowing your subs to be used to their full potential. TacoTunes TT12 Subwoofers installed!Our TacoTunes Laser Cut / CNC Bent Amp Rack bolts to your factory mounting location under your passenger seat. Don’t let anyone drill holes in your baby!
Mounted to the stock mounting locations are the TXD3204v 4 channel amp and TXD1001 subwoofer amp. Using our plug and play harness which is connected to your head unit, these amps provide your new speakers and subwoofer(s) with the power they need for you to have the most ideal listening experience.CXS64 Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. The CXS64 consist of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels. The laser cut crossover mount provides a secure mounting location. There is no need to settle for OEM style speakers AND do NOT recommend using mis-matched coaxial speakersA closer look at the CXS64 Front door midbass driverCXS64 tweeters are mounted in our sail panels. They consist of complete plug and play wiring, which requires ZERO cutting and splicing of your factory wires, making their installation 100% reversible. Tweeter audio frequencies are HIGHLY directional. For the best listening experience, we suggest placing these up high and out of the way where nothing can block the higher frequencies.Component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or low-end coaxial speakersTacoTunes 80w drop in coaxial speakers provide a major audio output upgrade to your rear door speakers.
Frequently asked questions
Can a used Taco Tunes system be moved to another Tundra?
Yes. Because the systems are plug and play and bolt to factory locations, a Taco Tunes system can be removed and reinstalled in another compatible Tundra, as Daniel did with his 2017 CrewMax.
Why do 2020 and newer Tundras need an LOC?
Starting in 2020, Tundras came with factory Apple CarPlay and Android Auto. Adding amplifiers to those head units requires a line output converter (LOC), so the equipment is slightly different from 2007-2019 trucks.
Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?
Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.
A HUGE thank you to Craig for making his way out to our shop from HOUSTON, Texas!
Craig came to us unsatisfied with his 2013 Tundra’s audio system after he upgraded his head unit and installed some aftermarket speakers. So, we got him set up with our system 1A!
Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results!
Our complete system is plug and play completely reversible ( ZERO cutting and splicing of stock wires) AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.
Our audio system will work with your stock stereo and most aftermarket head units.
75 watts to each door speaker & 350 watts (RMS) to your subwoofer
Subwoofer(s)
Subwoofer Box & Subwoofers
Tacotunes.com Single 12″ subwoofer
Install photos
Frequently asked questions
Will a Taco Tunes system work with an aftermarket head unit?
Yes. Our systems work with the stock stereo and most aftermarket head units, so you can upgrade the screen now or later.
What is the difference between System 1A and System 1B?
System 1A is our streamlined package with front components, rear coaxials, a multi-channel amp and a single sub. System 1B steps up to more speakers, more power and dual subwoofers.
Do customers really drive hours for a Taco Tunes install?
Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.
A HUGE thank you to George for coming out to our shop!
Vehicle
2019 Toyota Tundra
System
System 1A
Posted
August 2024
Shop
Taco Tunes, San Antonio, TX
George came to us unsatisfied with his 2019 Tundra’s audio system… So, we got him set up with our system 1A!
How the Taco Tunes system installs
Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results!
Our complete system is plug and play completely reversible ( ZERO cutting and splicing of stock wires) AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.
Our audio system will work with your stock stereo and most aftermarket head units.
Rear Door Components: 6.5 Inch 4 Ohm 80 Watts RMS OEM Replacement Coaxial Speakers
Amp: tacotunes.com TXD10005 5 channel amplifier; 75 watts to each door speaker & 350 watts (RMS) to your subwoofer
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Single 12″ subwoofer
Install photos
Our Tacotunes.com single 12” subwoofer box fits like a glove behind your rear seat!Our TacoTunes Laser Cut / CNC Bent Amp Rack bolts to your factory mounting location under your passenger seat. No need to drill holes in your baby!
Mounted to our amp rack is our TXD1005 5 channel amp. This amp is used to power a SINGLE subwoofer, speakers and tweeters. Using our plug and play harness which is connected to your head unit and stock wiring, it provides your new speakers and subwoofer with the power they need to give you the best listening experience!Tacotunes.com TT65cs Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. Our TT65cs consist of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels. The laser cut crossover mount provides a secure mounting location. There is no need to settle for OEM style speakers AND do NOT recommend using mis-matched coaxial speakers.Our TT65CS tweeters are mounted in your new Sale Panels. They also use complete plug and play wiring to connect to your stock wiring. This makes their installation capable of being reversed 100% back to OEM products. Tweeter audio frequencies are HIGHLY directional. To achieve the best listening experience possible, we recommend you place these up high where nothing can block the higher frequencies.TacoTunes 80w drop in coaxial speakers provide a major audio output upgrade to your rear door speakers.Component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or low-end coaxial speakersOur System 1A includes a single 12” subwoofer in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Our Tundra direct integration system will provide astonishing sound quality and allow you to keep your stock head unit. Most of our customers do not want to change their head unit. However, if you later decide to upgrade, our amps are designed to work with just about any aftermarket option. Whether you keep your stock one, or go aftermarket, our Tundra direct integration plug and play harness will require NO cutting or splicing any of your factory wiring. The installation can be easily 100% reversed back to OEM equipment… Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.
Frequently asked questions
What is the difference between System 1A and System 1B?
System 1A is our streamlined package with front components, rear coaxials, a multi-channel amp and a single sub. System 1B steps up to more speakers, more power and dual subwoofers.
Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?
Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
A HUGE thank you to Patrick for making the trip to our shop!
Vehicle
2022 Toyota Tundra CrewMax
System
System 1B
Posted
August 2024
Shop
Taco Tunes, San Antonio, TX
Patrick was very disappointed with the audio system in his 2022 Crew max. So.. We got him set up with our system 1B!
He was SHOCKED by the MAJOR upgrade in his Tundra’s audio!
The system 1B that includes the following
2022+ Tundra Factory Integration System: 3 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.; NTUNE6 – LOC / Audio leveler & Bass Enhancement module
Front Door Component Speakers: Tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Mid bass Drivers -100 Watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com Dash Speaker Wire Harness Adapters; Tweeters Installed in dash location using tweeter adapters.
Rear Door Components: Tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Mid bass drivers Handles -100 watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Tweeter Harness Adapters; Tweeters will fit in stock door location
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; TacoTunes TT10 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!
Install photos
Laser Cut / CNC Bent Amp Rack. Bolts behind your rear seat on your passenger side with a stock mounting location. Don’t let audio shops drill holes in your new Tundra! Tacotunes.com TXD1001 Subwoofer amp and TXD3204v 4 channel amp, mounted to rear wall using stock mounting location (bolts).Our System 1B includes dual 10” subwoofers in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Direct tundra integration… Keep your stock head unit and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Tacotunes.com TT65cs Front Door Component Speakers. Designed to work with your dash tweeter, you can see the crossover network on the floor that will be hidden under the front kick panel. A true component setup in your Tundra. Don’t settle for OEM style or low-end coaxial speakers!Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersOur Tacotunes.com dual 10” subwoofer box fits like a glove behind your rear seat! Don’t give up your under-seat storage when you can keep it AND enjoy your music!Tacotunes 2022+ tundra, Rear wall amp rack assembled and ready to be installed!
Frequently asked questions
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
Can a Taco Tunes system be added when I buy a new Tundra?
Yes. Many of our systems are rolled into new vehicle financing, and we often install Tundra audio systems for dealers before trucks reach the lot.
A HUGE thank you to Troy for making the trip out to our shop from HOUSTON, Texas. A 6 hour round trip!
Vehicle
2024 Toyota Tundra Platinum Hybrid
Posted
July 2024
Shop
Taco Tunes, San Antonio, TX
Troy could not tolerate the factory audio in his 2024 Platinum, and although our 2022+ Tundra HYBRID enclosures are not yet available, he was desperate for an audio system upgrade.
So… We got him set up with new door speakers and a temporary subwoofer solution to meet his needs until our TacoTunes hybrid sub enclosure is completed!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Install photos
Tacotunes.com TT65cs Front Door mid bass driver. Designed to work with your A-Pillar tweeter, the crossover network is mounted to the amp rack located on the rear wall of your Tundra. A true component setup! Don’t settle for OEM style or low-end coaxial speakers!Our amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!The JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth.and 100% plug and play. Requiring ZERO cutting or splicing of your factory wiring.Tacotunes.com TT65cs direct fit silk dome tweeters produce the crisp, clear highs that that perform amazingly well at all listening levels. These tweeters are part of a true component speaker system that connects to the included crossover network.
Quickly & Easily installed in the factory mounting location of your A-pillar, our clip-in tweeter mounts fit seamlessly with ZERO cutting or modifications needed.Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.The TT65 tweeter seamlessly integrates into your factory location using our custom clip-in mount, requiring absolutely no modifications. This ensures a secure and factory-looking upgrade, making it easy to enhance your sound without compromising the look of your Tundra’s interior.TT65 rear door crossover network is mounted using our laser cut crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersDirect tundra integration… Keep your Factory Stereo (JBL Head Unit) and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Tacotunes 2022+ Tundra rear wall amp rack assembled and waiting to be installed!2022+ JBL Equipped Tundra Audio UpgradeTacotunes JBL tundra front door crossover network is mounted to the amp rack on your rear wall. The crossover network is responsible for directing the proper frequency to the new tweeters in the A-Pillar and the mid bass drivers in the front door. Don’t settle for low end OEM style or coaxial speakers.Plug & Play Harness Connections.
Frequently asked questions
Is there a subwoofer box that fits the Hybrid Tundra?
Yes. Our Hybrid Tundra subwoofer enclosures are custom molded to fit behind the rear seat of the 2022+ Hybrid Tundra while keeping your under-seat storage.
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Do customers really drive hours for a Taco Tunes install?
Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.
A HUGE thank you to David for coming out to our shop!
Vehicle
2014 Toyota Tundra
System
System 1A
Posted
July 2024
Shop
Taco Tunes, San Antonio, TX
David came to us unsatisfied with his 2014 Tundra’s audio system… So, he took advantage of our 4th Of July sale, and we got him set up with our system 1A!
How the Taco Tunes system installs
Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results!
Our complete system is plug and play completely reversible ( ZERO cutting and splicing of stock wires) AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.
Our audio system will work with your stock stereo and most aftermarket head units.
Rear Door Components: TT65CS rear door components.; Tacotunes.com speaker mounts; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters mounted in stock location.
Amp: tacotunes.com TXD10005 5 channel amplifier; 75 watts to each door speaker & 350 watts (RMS) to your subwoofer
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Single 12″ subwoofer
Install photos
Our Tacotunes.com single 12” subwoofer box fits like a glove behind your rear seat!Tacotunes.com TT65cs Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. Our TT65cs consist of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels. The laser cut crossover mount provides a secure mounting location. There is no need to settle for OEM style speakers AND do NOT recommend using mis-matched coaxial speakers.A closer look at TT65cs Front door midbass driverThe crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door in the rear door. Don’t settle for low end OEM style!
New tweeter installed in stock door location.Component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or low-end coaxial speakersTacotunes.com TT65cs Rear Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. Your new tweeter is located in your stock mounting location on the door panel! The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels.We offer plug and play wiring that makes it easy to install new tweeters/speakers, without having to cut or splice any wires.Our Tundra direct integration system will provide astonishing sound quality and allow you to keep your stock head unit. Most of our customers do not want to change their head unit. However, if you later decide to upgrade, our amps are designed to work with just about any aftermarket option. Whether you keep your stock one, or go aftermarket, our Tundra direct integration plug and play harness will require NO cutting or splicing any of your factory wiring. The installation can be easily 100% reversed back to OEM equipment… Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Tacotunes tt65cs midbass driver compared to the OEM tundra rear door speaker
Frequently asked questions
What is the difference between System 1A and System 1B?
System 1A is our streamlined package with front components, rear coaxials, a multi-channel amp and a single sub. System 1B steps up to more speakers, more power and dual subwoofers.
Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?
Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
A HUGE thank you to Omar for making his way out to our shop!
Vehicle
2017 Toyota Tundra CrewMax
System
System 1B
Posted
July 2024
Shop
Taco Tunes, San Antonio, TX
Omar was disappointed with the factory audio in his tundra.. SO, he took advantage of our 4th of July sale, and we got his 2017 CrewMax set up with our system 1B WITH sound deadener matting on the rear wall!
How the Taco Tunes system installs
Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results! In 2020 Tundra’s come equipped from the Factory Apple Car Play / Android Auto.
TacoTunes’ complete system is plug and play, completely reversible AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.
Our audio system will work with your stock stereo and most aftermarket head units.
tacotunes.com System 1B
Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters; tacotunes.com sail panels with tacotunes tweeters
Rear Door Components: TT65CS rear door components.; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters will fit in stock door location.
Amp: tacotunes.com TXD3204v2 Four channel amplifier; Tacotunes.com TXD1000.1 Subwoofer amp; 100 watts x 4 to each speaker and 1000 x 1 (subwoofers)
Our Tacotunes.com dual 12” subwoofer box fits like a glove behind your rear seat! No need to settle for shallow sounding shallow mount subwoofers!We offer plug and play wiring that makes it easy to install new tweeters/speakers, without having to cut or splice any wires.TT65cs Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. The TT65cs consist of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels. The laser cut crossover mount provides a secure mounting location. There is no need to settle for OEM style speakers AND do NOT recommend using mis-matched coaxial speakers.Component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or low-end coaxial speakersThe crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door in the rear door. Don’t settle for low end OEM style!
New tweeter installed in stock door location.
Frequently asked questions
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?
Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
A HUGE thank you to Jose for making his way out to our shop!
Vehicle
2016 Toyota Tundra CrewMax
System
System 1B
Posted
July 2024
Shop
Taco Tunes, San Antonio, TX
Jose was disappointed with the factory audio in his tundra.. SO, he took advantage of our 4th of July sale, and we got his 2016 CrewMax set up with our system 1B with COMPLETE sound deadener matting!
How the Taco Tunes system installs
Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results! In 2020 Tundra’s come equipped from the Factory Apple Car Play / Android Auto.
TacoTunes’ complete system is plug and play, completely reversible AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.
Our audio system will work with your stock stereo and most aftermarket head units.
tacotunes.com System 1B
Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters; tacotunes.com sail panels with tacotunes tweeters
Rear Door Components: TT65CS rear door components.; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters will fit in stock door location.
Amp: tacotunes.com TXD3204v2 Four channel amplifier; Tacotunes.com TXD100.1 Subwoofer amp; 100 watts x 4 to each speaker and 1000 x 1 (subwoofers)
These trucks never get old!Our Tacotunes.com dual 12” subwoofer box fits like a glove behind your rear seat! No need to settle for shallow sounding shallow mount subwoofers!Our TacoTunes Laser Cut / CNC Bent Amp Rack bolts to your factory mounting location under your passenger seat. Don’t let anyone drill holes in your baby!
Mounted to the stock mounting locations are the TXD3204v 4 channel amp and TXD1001 subwoofer amp. Using our plug and play harness which is connected to your head unit, these amps provide your new speakers and subwoofer(s) with the power they need for you to have the most ideal listening experience.Component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or low-end coaxial speakersTT65cs Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. The TT65cs consist of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels. The laser cut crossover mount provides a secure mounting location. There is no need to settle for OEM style speakers AND do NOT recommend using mis-matched coaxial speakers.TT65cs tweeters are mounted in our sail panels. They consist of complete plug and play wiring, which requires ZERO cutting and splicing of your factory wires, making their installation 100% reversible. Tweeter audio frequencies are HIGHLY directional. For the best listening experience, we suggest placing these up high and out of the way where nothing can block the higher frequencies.A closer look at the TT65cs front door midbass driverThe crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door in the rear door. Don’t settle for low end OEM style!
New tweeter installed in stock door location.A closer look at the TT65cs Rear door midbass driverRear wall matted and ready for the sub enclosure to be installed!Our Tundra direct integration system will provide astonishing sound quality and allow you to keep your stock head unit. Most of our customers do not want to change their head unit. However, if you later decide to upgrade, our amps are designed to work with just about any aftermarket option. Whether you keep your stock one, or go aftermarket, our tundra direct integration plug and play harness will require NO cutting or splicing any of your factory wiring. The installation can be easily 100% reversed back to OEM equipment… Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.
Frequently asked questions
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?
Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
A HUGE thank you to Jason for coming out to our shop!
Vehicle
2021 Toyota Tundra
System
System 1A
Posted
July 2024
Shop
Taco Tunes, San Antonio, TX
Jason came to us unsatisfied with his 2021 Tundra’s audio system… So, he took advantage of our 4th Of July sale, and we got him set up with our system 1A!
How the Taco Tunes system installs
Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results!
Our complete system is plug and play completely reversible ( ZERO cutting and splicing of stock wires) AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.
Our audio system will work with your stock stereo and most aftermarket head units.
Rear Door Components: TT65CS rear door components.; Tacotunes.com speaker mounts; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters mounted in stock location.
Amp: tacotunes.com TXD10005 5 channel amplifier; 75 watts to each door speaker & 350 watts (RMS) to your subwoofer
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Single 12″ subwoofer
Install photos
Our Tacotunes.com single 12” subwoofer box fits like a glove behind your rear seat!Our TacoTunes Laser Cut / CNC Bent Amp Rack bolts to your factory mounting location under your passenger seat. No need to drill holes in your baby!
Mounted to our amp rack is our TXD1005 5 channel amp. This amp is used to power a SINGLE subwoofer, speakers and tweeters. Using our plug and play harness which is connected to your head unit and stock wiring, it provides your new speakers and subwoofer with the power they need to give you the best listening experience!Tacotunes.com TT65cs Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. Our TT65cs consist of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels. The laser cut crossover mount provides a secure mounting location. There is no need to settle for OEM style speakers AND do NOT recommend using mis-matched coaxial speakers.Component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or low-end coaxial speakersOur TT65CS tweeters are mounted in your dash. They also use complete plug and play wiring to connect to your stock wiring. This makes their installation capable of being reversed 100% back to OEM products. Tweeter audio frequencies are HIGHLY directional. To achieve the best listening experience possible, we recommend you place these up high where nothing can block the higher frequencies.The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door in the rear door. Don’t settle for low end OEM style!
New tweeter installed in stock door location.A closer look at tacotunes tt65cs rear door midbass driverThe NTUNE6 is designed to keep your stock stereo and add aftermarket amplifiers(s) to your Toyota Tundra. When Toyota added Android Auto & Apple Car play to your Tundra, the bass and audio signal coming from the stock stereo was significantly reduced. This created many problems with bass output and speaker level output.TacoTunes TXD1000.5 – 5 channel amp ready to be installedOur Tundra direct integration system will provide astonishing sound quality and allow you to keep your stock head unit. Most of our customers do not want to change their head unit. However, if you later decide to upgrade, our amps are designed to work with just about any aftermarket option. Whether you keep your stock one, or go aftermarket, our Tundra direct integration plug and play harness will require NO cutting or splicing any of your factory wiring. The installation can be easily 100% reversed back to OEM equipment… Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Keep under your hood clean from those loose single fuses with our Laser Cut / CNC Bent Fuse Holder Bracket! Makes adding aftermarket electrical upgrades MUCH easier AND organized!
Frequently asked questions
What is the difference between System 1A and System 1B?
System 1A is our streamlined package with front components, rear coaxials, a multi-channel amp and a single sub. System 1B steps up to more speakers, more power and dual subwoofers.
Why do 2020 and newer Tundras need an LOC?
Starting in 2020, Tundras came with factory Apple CarPlay and Android Auto. Adding amplifiers to those head units requires a line output converter (LOC), so the equipment is slightly different from 2007-2019 trucks.
Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?
Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.