A massive thank you to the Falls for making the epic 10-hour round trip from the Dallas, Texas area!
Vehicle
2024 Toyota Tundra TRD Pro Hybrid JBL
System
System 1B
Posted
April 2025
Shop
Taco Tunes, San Antonio, TX
They were let down by their 2024 TRD PRO Tundra’s audio, so we hooked them up with our killer 2022+ JBL Hybrid Tundra System 1B and full sound deadening
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Our Tacotunes.com dual 10” HYBRID TUNDRA subwoofer box fits like a glove behind your rear seat! Don’t give up your under-seat storage when you can keep it AND enjoy your music!Our System 1B includes dual 10” subwoofers in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.The JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth and 100% plug and play. Requiring ZERO cutting or splicing of your factory wiring.LOVE These trucks!Tacotunes JBL tundra front door crossover network is mounted to the amp rack on your rear wall. The crossover network is responsible for directing the proper frequency to the new tweeters in the A-Pillar and the mid bass drivers in the front door. Don’t settle for low end OEM style or coaxial speakers.Tacotunes.com TT65cs Front Door mid bass driver. Designed to work with your A-Pillar tweeter, the crossover network is mounted to the amp rack located on the rear wall of your Tundra. A true component setup! Don’t settle for OEM style or low-end coaxial speakers!Tacotunes.com TT65cs direct fit silk dome tweeters produce the crisp, clear highs that that perform amazingly well at all listening levels. These tweeters are part of a true component speaker system that connects to the included crossover network.
Quickly & Easily installed in the factory mounting location of your A-pillar, our clip-in tweeter mounts fit seamlessly with ZERO cutting or modifications needed.Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersJ.A.R.V.I.S Integration system hidden under the driver’s seat alongside the factory amplifier!The pre-amp audio signal is routed to the AVC/LAN interface module then provides that clean flat signal directly to the TXD3204 (4 Channel) & TXD10001 (subwoofer amp). The amps then provide the amplified signal to your speakers via the plug and play speaker harness integration system. There is no need to run new speaker wire. NO cutting or splicing ANY of your factory wires. The system is completely reversible.Plug & Play Harness Connections.Direct tundra integration… Keep your Factory Stereo (JBL Head Unit) and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.COMPLETE sound deadener matting getting added to this TRD PRO!
Frequently asked questions
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Is there a subwoofer box that fits the Hybrid Tundra?
Yes. Our Hybrid Tundra subwoofer enclosures are custom molded to fit behind the rear seat of the 2022+ Hybrid Tundra while keeping your under-seat storage.
Do customers really drive hours for a Taco Tunes install?
Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.
A HUGE thank you to Troy for making the trip out to our shop from Houston, Texas…. A 6 hour round trip!!!
Vehicle
2024 Toyota Tundra Hybrid JBL
System
System 1B
Posted
April 2025
Shop
Taco Tunes, San Antonio, TX
Troy could not tolerate the factory audio in his 2024 HYBRID Tundra. So… We got him set up with our 2022+ JBL Hybrid Tundra system 1B, along with COMPLETE sound deadener matting!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD1000.1 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Tacotunes hybrid subwoofer enclosure installedOur amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!Tacotunes Hybrid Tundra Dual subwoofer enclosure includes two 10” subwoofers in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Tacotunes JBL tundra front door crossover network is mounted to the amp rack on your rear wall. The crossover network is responsible for directing the proper frequency to the new tweeters in the A-Pillar and the mid bass drivers in the front door. Don’t settle for low end OEM style or coaxial speakers.Tacotunes.com TT65cs direct fit silk dome tweeters produce the crisp, clear highs that that perform amazingly well at all listening levels. These tweeters are part of a true component speaker system that connects to the included crossover network.Bass knob installed in factory location. Allowing you to adjust your subwoofers to your liking!Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersTacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.The JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth.and 100% plug and play. Requiring ZERO cutting or splicing of your factory wiring.The pre-amp audio signal is routed to the AVC/LAN interface module then provides that clean flat signal directly to the TXD3204 (4 Channel) & TXD10001 (subwoofer amp). The amps then provide the amplified signal to your speakers via the plug and play speaker harness integration system. There is no need to run new speaker wire. NO cutting or splicing ANY of your factory wires. The system is completely reversible.Plug & Play Harness Connections.Direct tundra integration… Keep your Factory Stereo (JBL Head Unit) and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.
Frequently asked questions
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Is there a subwoofer box that fits the Hybrid Tundra?
Yes. Our Hybrid Tundra subwoofer enclosures are custom molded to fit behind the rear seat of the 2022+ Hybrid Tundra while keeping your under-seat storage.
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
A HUGE thank you to Michael for making the trip out to our shop from Amarillo, Texas…. A 14 hour round trip!!!
Vehicle
2022 Toyota Tundra Hybrid JBL
System
System 1B
Customer from
Amarillo
Posted
March 2025
Shop
Taco Tunes, San Antonio, TX
Michael could not tolerate the factory audio in his 2022 HYBRID Tundra. So… We got him set up with our 2022+ JBL Hybrid Tundra system 1B, along with COMPLETE sound deadener matting!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B:
2022+ JBL Tundra Factory Integration System
2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Tacotunes hybrid subwoofer enclosure installed alongside Tacotunes 2022+ Tundra rear wall amp rack!Tacotunes Hybrid Tundra Dual subwoofer enclosure includes two 10” subwoofers in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Our amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!Tacotunes.com TT65cs Front Door mid bass driver. Designed to work with your A-Pillar tweeter, the crossover network is mounted to the amp rack located on the rear wall of your Tundra. A true component setup! Don’t settle for OEM style or low-end coaxial speakers!Tacotunes.com TT65cs direct fit silk dome tweeters produce the crisp, clear highs that that perform amazingly well at all listening levels. These tweeters are part of a true component speaker system that connects to the included crossover network.
Quickly & Easily installed in the factory mounting location of your A-pillar, our clip-in tweeter mounts fit seamlessly with ZERO cutting or modifications needed.THREE upgraded dash speakers replace you OEM ones!Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.TT65 rear door crossover network is mounted using our laser cut crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersThe TT65 tweeter seamlessly integrates into your factory location using our custom clip-in mount, requiring absolutely no modifications. This ensures a secure and factory-looking upgrade, making it easy to enhance your sound without compromising the look of your Tundra’s interior.Tacotunes 2022+ JBL Tundra integration system waiting to be installed!The JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth and 100% plug and play. Requiring ZERO cutting or splicing of your factory wiringDirect tundra integration… Keep your Factory Stereo (JBL Head Unit) and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Keep for factory equipment with our 100% reversible audio system in case you decide to trade in your tundra!Bass knob installed in factory location. Allowing you to adjust your subwoofers to your liking!
Frequently asked questions
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
Do customers really drive hours for a Taco Tunes install?
Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.
A HUGE thank you to Jay for bringing his 2024 JBL Equipped, Hybrid Tundra to our shop!
Vehicle
2024 Toyota Tundra Hybrid JBL
System
Add-A-Subwoofer
Posted
March 2025
Shop
Taco Tunes, San Antonio, TX
Jay came to us looking to upgrade his factory JBL subwoofer. So… we got him set up with our Budget Friendly Add-A-Subwoofer System.
How the Taco Tunes system installs
Our system, with its plug-and-play harness and line out converter, delivers upgraded bass by merging the JBL amplifier’s signals. Enjoy a significant bass boost with our 100% reversible, plug & play audio system upgrade!
Tacotunes Budget Friendly add a subwoofer package
Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Amplifier Upgrade: Laser Cut Amp Rack that bolts to factory mounting location on your rear wall. Don’t let audio shops drill holes in Tundra!
Tacotunes Hybrid Tundra Dual subwoofer enclosure includes two 10” subwoofers in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Love these Hybrid Tundra’s!Amp rack waiting to be installed!
Our amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD1000.1 subwoofer amp, With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!Tacotunes hybrid subwoofer enclosure installedThe JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth and 100% plug and play. Requiring ZERO cutting or splicing of your factory wiring.Rear seats removed and waiting to be re-installed!Tacotunes integration harnesses installed and the Factory JBL amplifier put back into place!Rear seats removed allowing for seamless subwoofer and amp rack installation!Direct tundra integration… Keep your Factory Stereo (JBL Head Unit) and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.
Frequently asked questions
What is the difference between the Budget Add-A-Sub and the Starter kit?
Both add bass to a JBL Tundra with plug-and-play wiring. The Budget Friendly package pairs a line output converter with an external amp and ported subs, while the Starter kit uses a powered enclosure with a built-in amplifier.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
We had a blast setting up Mike’s 2023 HYBRID Tundra! Mike (an audio enthusiast himself) came to us because he just couldn’t stand the factory JBL audio anymore.
Vehicle
2023 Toyota Tundra Hybrid JBL
System
System 1B
Posted
March 2025
Shop
Taco Tunes, San Antonio, TX
We hooked him up with our Hybrid Tundra System 1B!
Highlighting this system’s custom-molded subwoofer enclosure and clean Pre-Amp signal integration, we completely transformed his listening experience… Seeing his smile after this installation was truly rewarding!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
The Tacotunes dual 10″ subwoofer enclosure is a precision-engineered solution designed to seamlessly integrate behind your hybrid Tundra’s rear seat. Here the subwoofer enclosure is ready to be installed!i-Force Max – Love these Hybrids!Our amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!Tacotunes JBL tundra front door crossover network is mounted to the amp rack on your rear wall. The crossover network is responsible for directing the proper frequency to the new tweeters in the A-Pillar and the mid bass drivers in the front door. Don’t settle for low end OEM style or coaxial speakers.Tacotunes.com TT65cs Front Door mid bass driver. Designed to work with your A-Pillar tweeter, the crossover network is mounted to the amp rack located on the rear wall of your Tundra. A true component setup! Don’t settle for OEM style or low-end coaxial speakers!Tacotunes.com TT65cs direct fit silk dome tweeters produce the crisp, clear highs that that perform amazingly well at all listening levels. These tweeters are part of a true component speaker system that connects to the included crossover network.
Quickly & Easily installed in the factory mounting location of your A-pillar, our clip-in tweeter mounts fit seamlessly with ZERO cutting or modifications needed.3 Upgraded dash speakers!REAR DOOR TWEETERS-
The TT65 tweeter seamlessly integrates into your factory location using our custom clip-in mount, requiring absolutely no modifications. This ensures a secure and factory-looking upgrade, making it easy to enhance your sound without compromising the look of your Tundra’s interior.TT65 rear door crossover network is mounted using our laser cut crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersTacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.Direct tundra integration… Keep your Factory Stereo (JBL Head Unit) and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.The JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth and 100% plug and play. Requiring ZERO cutting or splicing of your factory wiring.J.A.R.V.I.S hidden seamlessly under the factory JBL amp!
Frequently asked questions
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Is there a subwoofer box that fits the Hybrid Tundra?
Yes. Our Hybrid Tundra subwoofer enclosures are custom molded to fit behind the rear seat of the 2022+ Hybrid Tundra while keeping your under-seat storage.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
A HUGE thank you to Silvester for making the trip out to our shop from Houston,Texas…. A 6 hour round trip!
Vehicle
2025 Toyota Tundra JBL
System
System 1B
Customer from
Houston
Posted
January 2025
Shop
Taco Tunes, San Antonio, TX
Silvester could not tolerate the factory audio in his 2025 Tundra. So… We got him set up with our 2022+ JBL Tundra system 1B!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; Image Dynamics ID10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!
Install photos
Our System 1B includes dual 10” subwoofers in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Our Tacotunes.com dual 10” subwoofer box fits like a glove behind your rear seat! Don’t give up your under-seat storage when you can keep it AND enjoy your music!Our amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!Tacotunes JBL tundra front door crossover network is mounted to the amp rack on your rear wall. The crossover network is responsible for directing the proper frequency to the new tweeters in the A-Pillar and the mid bass drivers in the front door. Don’t settle for low end OEM style or coaxial speakers.Tacotunes.com TT65cs Front Door mid bass driver. Designed to work with your A-Pillar tweeter, the crossover network is mounted to the amp rack located on the rear wall of your Tundra. A true component setup! Don’t settle for OEM style or low-end coaxial speakers!Tacotunes.com TT65cs direct fit silk dome tweeters produce the crisp, clear highs that that perform amazingly well at all listening levels. These tweeters are part of a true component speaker system that connects to the included crossover network.
Quickly & Easily installed in the factory mounting location of your A-pillar, our clip-in tweeter mounts fit seamlessly with ZERO cutting or modifications needed.Upgraded 3.5″ dash speakers replace the factory dash speakersTacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.TT65 rear door crossover network is mounted using our laser cut crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersThe TT65 tweeter seamlessly integrates into your factory location using our custom clip-in mount, requiring absolutely no modifications. This ensures a secure and factory-looking upgrade, making it easy to enhance your sound without compromising the look of your Tundra’s interior.Requiring absolutely no modifications the TT65 tweeter seamlessly integrates into your factory locationDirect tundra integration… Keep your Factory Stereo (JBL Head Unit) and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mentionKeep under your hood clean from those loose single fuses with our Laser Cut / CNC Bent Fuse Holder Bracket! Makes adding aftermarket electrical upgrades MUCH easier AND organized!
Frequently asked questions
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
Do customers really drive hours for a Taco Tunes install?
Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.
A HUGE thank you to David for making the trip out to our shop!
Vehicle
2023 Toyota Tundra JBL
System
System 1B
Posted
October 2024
Shop
Taco Tunes, San Antonio, TX
David could not tolerate the factory audio in his 2023 Tundra. So… We got him set up with our 2022+ JBL Tundra system 1B!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Our amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!Our Tacotunes.com dual 10” subwoofer box fits like a glove behind your rear seat! Don’t give up your under-seat storage when you can keep it AND enjoy your music!Tacotunes.com TT65cs Front Door mid bass driver. Designed to work with your A-Pillar tweeter, the crossover network is mounted to the amp rack located on the rear wall of your Tundra. A true component setup! Don’t settle for OEM style or low-end coaxial speakers!Power wire ran to Tacotunes rear wall amp rack, and Tacotunes TT5cs front door midbass driver waiting to be installedTacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakers
Frequently asked questions
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
A HUGE thank you to Troy for making the trip out to our shop from HOUSTON, Texas. A 6 hour round trip!
Vehicle
2024 Toyota Tundra Platinum Hybrid
Posted
July 2024
Shop
Taco Tunes, San Antonio, TX
Troy could not tolerate the factory audio in his 2024 Platinum, and although our 2022+ Tundra HYBRID enclosures are not yet available, he was desperate for an audio system upgrade.
So… We got him set up with new door speakers and a temporary subwoofer solution to meet his needs until our TacoTunes hybrid sub enclosure is completed!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Install photos
Tacotunes.com TT65cs Front Door mid bass driver. Designed to work with your A-Pillar tweeter, the crossover network is mounted to the amp rack located on the rear wall of your Tundra. A true component setup! Don’t settle for OEM style or low-end coaxial speakers!Our amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!The JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth.and 100% plug and play. Requiring ZERO cutting or splicing of your factory wiring.Tacotunes.com TT65cs direct fit silk dome tweeters produce the crisp, clear highs that that perform amazingly well at all listening levels. These tweeters are part of a true component speaker system that connects to the included crossover network.
Quickly & Easily installed in the factory mounting location of your A-pillar, our clip-in tweeter mounts fit seamlessly with ZERO cutting or modifications needed.Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.The TT65 tweeter seamlessly integrates into your factory location using our custom clip-in mount, requiring absolutely no modifications. This ensures a secure and factory-looking upgrade, making it easy to enhance your sound without compromising the look of your Tundra’s interior.TT65 rear door crossover network is mounted using our laser cut crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersDirect tundra integration… Keep your Factory Stereo (JBL Head Unit) and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Tacotunes 2022+ Tundra rear wall amp rack assembled and waiting to be installed!2022+ JBL Equipped Tundra Audio UpgradeTacotunes JBL tundra front door crossover network is mounted to the amp rack on your rear wall. The crossover network is responsible for directing the proper frequency to the new tweeters in the A-Pillar and the mid bass drivers in the front door. Don’t settle for low end OEM style or coaxial speakers.Plug & Play Harness Connections.
Frequently asked questions
Is there a subwoofer box that fits the Hybrid Tundra?
Yes. Our Hybrid Tundra subwoofer enclosures are custom molded to fit behind the rear seat of the 2022+ Hybrid Tundra while keeping your under-seat storage.
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Do customers really drive hours for a Taco Tunes install?
Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.
A HUGE thank you to Anthony for making the trip out to our shop a SECOND time!
Vehicle
2024 Toyota Tundra JBL
System
System 1B
Posted
July 2024
Shop
Taco Tunes, San Antonio, TX
Anthony had us install our system 1 in his 2015 tundra last year. After upgrading to a 2024 tundra he was NOT impressed by the JBL system.
So…. we got his new 2024 crew max set up with our 2022+ JBL Tundra system 1B with COMPLETE sound deadener matting, and he was all smiles!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; Image Dynamics ID10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!
Install photos
Our System 1B includes dual 10” subwoofers in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Our Tacotunes.com dual 10” subwoofer box fits like a glove behind your rear seat! Don’t give up your under-seat storage when you can keep it AND enjoy your music!Our amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!3 Upgraded dash speakers!Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.Tacotunes JBL tundra front door crossover network is mounted to the amp rack on your rear wall. The crossover network is responsible for directing the proper frequency to the new tweeters in the A-Pillar and the mid bass drivers in the front door. Don’t settle for low end OEM style or coaxial speakers.A closer look at tacotunes TT65cs rear door midbass driverThe TT65 tweeter seamlessly integrates into your factory location using our custom clip-in mount, requiring absolutely no modifications. This ensures a secure and factory-looking upgrade, making it easy to enhance your sound without compromising the look of your Tundra’s interior.
Frequently asked questions
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
A huge thank you to Marcus for making his way out to our shop!
Vehicle
2016 Toyota Tundra CrewMax JBL
System
System 1B
Posted
June 2024
Shop
Taco Tunes, San Antonio, TX
Marcus was disappointed with the factory JBL audio in his tundra… SO, he took advantage of our JULY 4TH SALE, and we got his 2016 CrewMax set up with our system 1B!
How the Taco Tunes system installs
Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results! In 2020 Tundra’s come equipped from the Factory Apple Car Play / Android Auto.
TacoTunes’ complete system is plug and play, completely reversible AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.
Our audio system will work with your stock stereo and most aftermarket head units.
tacotunes.com System 1B
Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters; tacotunes.com sail panels with tacotunes tweeters
Rear Door Components: TT65CS rear door components.; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters will fit in stock door location.
Amp: tacotunes.com TXD3204v2 Four channel amplifier; Tacotunes.com TXD1000.1 Subwoofer amp; 100 watts x 4 to each speaker and 1000 x 1 (subwoofers)
Wiring: Taco Tunes 2007-2021 Tundra JBL plug-and-play amp replacement harness (no cutting or splicing)
Power: Taco Tunes 4 gauge OFC amplifier power kit with inline fuse holder
Install photos
Our Tacotunes.com dual 12” subwoofer box fits like a glove behind your rear seat! No need to settle for shallow sounding shallow mount subwoofers!Our TacoTunes Laser Cut / CNC Bent Amp Rack bolts to your factory mounting location under your passenger seat. Don’t let anyone drill holes in your baby!
Mounted to the stock mounting locations are the TXD3204v 4 channel amp and TXD1001 subwoofer amp. Using our plug and play harness which is connected to your head unit, these amps provide your new speakers and subwoofer(s) with the power they need for you to have the most ideal listening experience.TT65cs Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. The TT65cs consist of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels. The laser cut crossover mount provides a secure mounting location. There is no need to settle for OEM style speakers AND do NOT recommend using mis-matched coaxial speakers.Tacotunes Front door tt65cs mid bass driverTT65cs tweeters are mounted in our sail panels. They consist of complete plug and play wiring, which requires ZERO cutting and splicing of your factory wires, making their installation 100% reversible. Tweeter audio frequencies are HIGHLY directional. For the best listening experience, we suggest placing these up high and out of the way where nothing can block the higher frequencies.We offer plug and play wiring that makes it easy to install new tweeters/speakers, without having to cut or splice any wires.The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door in the rear door. Don’t settle for low end OEM style!
New tweeter installed in stock door location.Our Taco tunes TT65cs Rear door speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersComponent speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or low-end coaxial speakersOur System 1B includes a dual 12” subwoofer in a ported enclosure. Here the subwoofer box is installed in the Tundra and the seats are ready to be bolted back down!Our Tundra direct integration system will provide astonishing sound quality and allow you to keep your stock head unit. Most of our customers do not want to change their head unit. However, if you later decide to upgrade, our amps are designed to work with just about any aftermarket option. Whether you keep your stock one, or go aftermarket, our tundra direct integration plug and play harness will require NO cutting or splicing any of your factory wiring. The installation can be easily 100% reversed back to OEM equipment… Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Tweeter mounted high in the sail panel4-channel and subwoofer amps on our under-seat amp rackTT12 subwoofer in the ported dual 12″ enclosure4G OFC amplifier power kit and fuse holder
Frequently asked questions
Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?
Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
A HUGE thank you to DJ for making the trip out to our shop a SECOND time!
Vehicle
2024 Toyota Tundra JBL
System
System 1B
Posted
June 2024
Shop
Taco Tunes, San Antonio, TX
DJ was NOT impressed by the JBL system in his 2024 Toyota tundra
Prior to coming into the shop he took the liberty of doing a sound deadener upgrade. Once his truck was in our hands we got him set up with our 2022+ JBL Tundra system 1B and he was all smiles!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; Image Dynamics ID10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!
Install photos
The 2022+ JBL Equipped Tundras are starting to roll in!TacoTunes rear wall amp rack and dual 10″ subwoofer enclosure allow you to keep all the storage underneath your rear seat!Our System 1B includes dual 10” subwoofers in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.A closer look at Tacotunes TT65cs rear door midbass driverThe JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth.and 100% plug and play. Requiring ZERO cutting or splicing of your factory wiring.TacoTunes J.A.R.V.I.S Integration system hides underneath your factory amplifierOur amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.TacoTunes clip in tweeter mount allows our TT65cs tweeters to seamlessly mount into the factory location of you tundraTT65 rear door crossover network is mounted using our laser cut crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersThe TT65 tweeter seamlessly integrates into your factory location using our custom clip-in mount, requiring absolutely no modifications. This ensures a secure and factory-looking upgrade, making it easy to enhance your sound without compromising the look of your Tundra’s interior.Tacotunes.com TT65cs Front Door mid bass driver. Designed to work with your A-Pillar tweeter, the crossover network is mounted to the amp rack located on the rear wall of your Tundra. A true component setup! Don’t settle for OEM style or low-end coaxial speakers!
Frequently asked questions
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
A HUGE thank you to Joseph for making the trip out to our shop!
Vehicle
2023 Toyota Tundra JBL
System
System 1B
Posted
May 2024
Shop
Taco Tunes, San Antonio, TX
Joseph was not impressed by the JBL system in his 2023 Toyota tundra. So… we got him set up with our 2022+ JBL Tundra System 1B, and he was all smiles!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; Image Dynamics ID10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!
Install photos
2023 Toyota Tundra 1794 COMPLETE audio system upgrade!The JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth.and 100% plug and play. Requiring ZERO cutting or splicing of your factory wiring.Our amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!Our Tacotunes.com dual 10” subwoofer box fits like a glove behind your rear seat! Don’t give up your under-seat storage when you can keep it AND enjoy your music!Tacotunes.com TT65cs Front Door mid bass driver. Designed to work with your A-Pillar tweeter, the crossover network is mounted to the amp rack located on the rear wall of your Tundra. A true component setup! Don’t settle for OEM style or low-end coaxial speakers!Tacotunes.com TT65cs direct fit silk dome tweeters produce the crisp, clear highs that that perform amazingly well at all listening levels. These tweeters are part of a true component speaker system that connects to the included crossover network.
Quickly & Easily installed in the factory mounting location of your A-pillar, our clip-in tweeter mounts fit seamlessly with ZERO cutting or modifications needed.Left, Right & Center Dash Replacement SpeakersA closer look at tacotunes TT65cs front door mid bass driverTacotunes JBL tundra front door crossover network is mounted to the amp rack on your rear wall. The crossover network is responsible for directing the proper frequency to the new tweeters in the A-Pillar and the mid bass drivers in the front door. Don’t settle for low end OEM style or coaxial speakers.Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.
Frequently asked questions
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.