Posted on

2024 JBL Toyota Tundra System 1B: DJ’s Second Visit

The 2022+ JBL Equipped Tundras are starting to roll in! - 2024 JBL Tundra upgrade

A HUGE thank you to DJ for making the trip out to our shop a SECOND time!

Vehicle2024 Toyota Tundra JBL
SystemSystem 1B
PostedJune 2024
ShopTaco Tunes, San Antonio, TX

DJ was NOT impressed by the JBL system in his 2024 Toyota tundra

Prior to coming into the shop he took the liberty of doing a sound deadener upgrade. Once his truck was in our hands we got him set up with our 2022+ JBL Tundra system 1B and he was all smiles!

How the Taco Tunes system installs

Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.

Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.

The 2022+ Tundra JBL System 1B includes the following

  • 2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
  • Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
  • TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
  • Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
  • Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; Image Dynamics ID10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!

Install photos

Frequently asked questions

How does Taco Tunes integrate with the factory JBL system?

Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.

Is sound deadener worth adding to a Tundra?

Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.

Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?

No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.

Posted on

Houston to San Antonio: 2022+ Toyota Tundra CrewMax System 1B

Omar was all smiles after hearing his new system! - Tundra CrewMax audio upgrade Houston

A HUGE thank you to Omar for making the trip to our shop from HOUSTON, Texas. A SIX HOUR round trip!

Vehicle2022+ Toyota Tundra CrewMax
SystemSystem 1B
Customer fromHouston
PostedJune 2024
ShopTaco Tunes, San Antonio, TX

He was very disappointed with the audio system in his 202 Crew max. So.. We got him set up with our system 1B!

He was STUNNED by the MAJOR upgrade in his Tundra’s audio!

The system 1B that includes the following

  • 2022+ Tundra Factory Integration System: 3 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.; NTUNE6 – LOC / Audio leveler & Bass Enhancement module
  • Front Door Component Speakers: Tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Mid bass Drivers -100 Watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com Dash Speaker Wire Harness Adapters; Tweeters Installed in dash location using tweeter adapters.
  • Rear Door Components: Tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Mid bass drivers Handles -100 watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Tweeter Harness Adapters; Tweeters will fit in stock door location
  • Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
  • Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; Image Dynamics ID10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!

Install photos

Frequently asked questions

Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?

No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.

Do customers really drive hours for a Taco Tunes install?

Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.

Can I install a Taco Tunes system myself?

Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.

Posted on

2023 JBL Toyota Tundra System 1B: Clean Pre-Amp Signal, Big Results

Joseph loves his new system! - 2023 JBL Tundra System 1B

A HUGE thank you to Joseph for making the trip out to our shop!

Vehicle2023 Toyota Tundra JBL
SystemSystem 1B
PostedMay 2024
ShopTaco Tunes, San Antonio, TX

Joseph was not impressed by the JBL system in his 2023 Toyota tundra. So… we got him set up with our 2022+ JBL Tundra System 1B, and he was all smiles!

How the Taco Tunes system installs

Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.

Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.

The 2022+ Tundra JBL System 1B includes the following

  • 2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
  • Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
  • TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
  • Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
  • Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; Image Dynamics ID10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!

Install photos

Frequently asked questions

How does Taco Tunes integrate with the factory JBL system?

Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.

Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?

No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.

Can I install a Taco Tunes system myself?

Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.

Posted on

2021 Toyota Tundra CrewMax System 1B: Austin Customer Install

Love this color! - 2021 Tundra System 1B

A huge thank you to Chase for making his way out to our shop from Austin, Texas!

Vehicle2021 Toyota Tundra CrewMax
SystemSystem 1B
PostedMay 2024
ShopTaco Tunes, San Antonio, TX

Chase was disappointed with the factory audio in his tundra, so we got his 2021 CrewMax set up with our system 1B!

How the Taco Tunes system installs

Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results! In 2020 Tundra’s come equipped from the Factory Apple Car Play / Android Auto.

TacoTunes’ complete system is plug and play, completely reversible AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.

Our audio system will work with your stock stereo and most aftermarket head units.

tacotunes.com System 1B

  • Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters; tacotunes.com sail panels with tacotunes tweeters
  • Rear Door Components: TT65CS rear door components.; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters will fit in stock door location.
  • Amp: tacotunes.com TXD3204v2 Four channel amplifier; Tacotunes.com TXD100.1 Subwoofer amp; 100 watts x 4 to each speaker and 1000 x 1 (subwoofers)
  • Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 12″ subwoofers; TacoTunes Fiberglass dual subwoofer enclosure

Install photos

Frequently asked questions

Why do 2020 and newer Tundras need an LOC?

Starting in 2020, Tundras came with factory Apple CarPlay and Android Auto. Adding amplifiers to those head units requires a line output converter (LOC), so the equipment is slightly different from 2007-2019 trucks.

Do customers really drive hours for a Taco Tunes install?

Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.

Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?

Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.

Posted on

From Alabama: 2016 Toyota Tundra CrewMax System 1B Install

Ed was as smiles after hearing his new audio system! - 2016 Tundra CrewMax System 1B

A HUGE thank you to Ed for making his way out to our shop from ALABAMA!

Vehicle2016 Toyota Tundra CrewMax
SystemSystem 1B
Customer fromAlabama
PostedMay 2024
ShopTaco Tunes, San Antonio, TX

Ed has been following our page for quite some time. He told himself if he was ever in town, he WILL be stopping by to upgrade the audio in his 2016 CrewMax!

So… We got him set up with our system 1B, and he was ALL SMILES!

How the Taco Tunes system installs

Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results! In 2020 Tundra’s come equipped from the Factory Apple Car Play / Android Auto.

TacoTunes’ complete system is plug and play, completely reversible AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.

Our audio system will work with your stock stereo and most aftermarket head units.

tacotunes.com System 1B

  • Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters; tacotunes.com sail panels with tacotunes tweeters
  • Rear Door Components: TT65CS rear door components.; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters will fit in stock door location.
  • Amp: tacotunes.com TXD3204v2 Four channel amplifier; Tacotunes.com TXD100.1 Subwoofer amp; 100 watts x 4 to each speaker and 1000 x 1 (subwoofers)
  • Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 12″ subwoofers; Tacotunes.com dual subwoofer enclosure

Install photos

Frequently asked questions

Do customers really drive hours for a Taco Tunes install?

Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.

Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?

Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.

Can I install a Taco Tunes system myself?

Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.

Posted on

An Audiophile’s Choice: 2022+ JBL Tundra System 1B for Tim and Terri

An Audiophile's Choice by Taco Tunes, photo 1 of 13

Huge shoutout to Tim and Terri for driving all the way down from Sugar Land! That’s a 6-hour round trip – wow! We really appreciate y’all making the drive!

Vehicle2022+ Toyota Tundra JBL
SystemSystem 1B
PostedApril 2024
ShopTaco Tunes, San Antonio, TX

An audiophile at heart (having upgraded many systems), Tim knew the stock JBL audio in his new Tundra would be quickly replaced. Our Facebook page provided the information and the path! The challenge was, how do I keep the stock head unit and upgrade all my speakers and add subwoofer(s)?

Audio System Summary:

During his visit to our shop, we installed our 2022+ Tundra JBL System 1B direct integration / plug and play audio system.

How the Taco Tunes system installs

Tacotunes’ plug-and-play JBL integration system communicates directly with your stock stereo (head unit) via your Toyota Tundra’s AVC LAN (similar to CAN BUS) interface.

By obtaining the PRE-AMP audio signal (before the stock JBL amplifier), the interface delivers the cleanest audio signal – possible- to your aftermarket amplifiers. There is ZERO need for old school channel summing methods used in the past.

Unmatched audio clarity at ALL listening levels! Crystal-clear highs, well-defined mids, and that rich, deep powerful bass you have been craving for is now available!

JBL Tundra Component Speaker package

  • Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
  • TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
  • Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
  • Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; Image Dynamics ID10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!

Install photos

Frequently asked questions

How does Taco Tunes integrate with the factory JBL system?

Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.

Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?

No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.

Do customers really drive hours for a Taco Tunes install?

Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.

Posted on

2021 Toyota Tundra CrewMax System 1B Audio Upgrade

Bryan was all smiles after hearing his new system! - 2021 Tundra CrewMax audio upgrade

A huge thank you to Bryan for making his way out to our shop!

Vehicle2021 Toyota Tundra CrewMax
SystemSystem 1B
PostedApril 2024
ShopTaco Tunes, San Antonio, TX

Bryan was disappointed with his factory system.

So… We got his 2021 CrewMax set up with our system 1B! He was beyond thrilled!

How the Taco Tunes system installs

Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results! In 2020 Tundra’s come equipped from the Factory Apple Car Play / Android Auto.

TacoTunes’ complete system is plug and play, completely reversible AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.

Our audio system will work with your stock stereo and most aftermarket head units.

tacotunes.com System 1B

  • Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters; tacotunes.com sail panels with tacotunes tweeters
  • Rear Door Components: TT65CS rear door components.; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters will fit in stock door location.
  • Amp: tacotunes.com TXD3204v2 Four channel amplifier; Tacotunes.com TXD100.1 Subwoofer amp; 100 watts x 4 to each speaker and 1000 x 1 (subwoofers)
  • Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 12″ subwoofers; Tacotunes.com dual subwoofer enclosure

Install photos

Frequently asked questions

Why do 2020 and newer Tundras need an LOC?

Starting in 2020, Tundras came with factory Apple CarPlay and Android Auto. Adding amplifiers to those head units requires a line output converter (LOC), so the equipment is slightly different from 2007-2019 trucks.

Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?

Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.

Can I install a Taco Tunes system myself?

Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.

Posted on

2023 Toyota Tundra CrewMax System 1B: Beaumont Customer Install

Marco Was all smiles after hearing his new system! - 2023 Tundra audio upgrade

A HUGE thank you to Marco for making the trip to our shop from Beaumont, TX!

Vehicle2023 Toyota Tundra CrewMax
SystemSystem 1B
PostedMarch 2024
ShopTaco Tunes, San Antonio, TX

He was very disappointed with the sound quality of the OEM system in his 2023 Crew max. So.. We got him set up with our system 1B!

The system 1B that includes the following

  • 2022+ Tundra Factory Integration System: 3 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.; NTUNE6 – LOC / Audio leveler & Bass Enhancement module
  • Front Door Component Speakers: Tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Mid bass Drivers -100 Watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com Dash Speaker Wire Harness Adapters; Tweeters Installed in dash location using tweeter adapters.
  • Rear Door Components: Tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Mid bass drivers Handles -100 watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Tweeter Harness Adapters; Tweeters will fit in stock door location
  • Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
  • Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; Image Dynamics ID10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!

Install photos

Frequently asked questions

Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?

No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.

Do customers really drive hours for a Taco Tunes install?

Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.

Can I install a Taco Tunes system myself?

Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.

Posted on

11 Hours Round Trip: 2023 Toyota Tundra CrewMax System 1B From Nacogdoches

Jason was thrilled after hearing his new system! - 2023 Tundra CrewMax System 1B

A HUGE thank you to Jason for making the trip to our shop from Nacogdoches, TX an 11 HOUR ROUND TRIP!

Vehicle2023 Toyota Tundra CrewMax
SystemSystem 1B
Customer fromNacogdoches
PostedFebruary 2024
ShopTaco Tunes, San Antonio, TX

He was very disappointed with the sound quality of the OEM system in his 2023 Crew max. So.. We got him set up with our system 1B!

The system 1B that includes the following

  • 2022+ Tundra Factory Integration System: 3 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.; NTUNE6 – LOC / Audio leveler & Bass Enhancement module
  • Front Door Component Speakers: Tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Mid bass Drivers -100 Watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com Dash Speaker Wire Harness Adapters; Tweeters Installed in dash location using tweeter adapters.
  • Rear Door Components: Tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Mid bass drivers Handles -100 watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Tweeter Harness Adapters; Tweeters will fit in stock door location
  • Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
  • Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; Image Dynamics ID10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!

Install photos

Frequently asked questions

Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?

No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.

Do customers really drive hours for a Taco Tunes install?

Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.

Can I install a Taco Tunes system myself?

Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.

Posted on

2016 JBL Toyota Tundra CrewMax System 1B Audio Upgrade

Jerry was all smiles after hearing his new system! - 2016 JBL Tundra audio upgrade

A huge thank you to Jerry for making his way out to our shop!

Vehicle2016 Toyota Tundra CrewMax JBL
SystemSystem 1B
PostedJanuary 2024
ShopTaco Tunes, San Antonio, TX

Jerry was disappointed with his factory JBL system.

So… We got his 2016 CrewMax set up with our system 1B! He was beyond thrilled!

How the Taco Tunes system installs

Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results! In 2020 Tundra’s come equipped from the Factory Apple Car Play / Android Auto.

TacoTunes’ complete system is plug and play, completely reversible AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.

Our audio system will work with your stock stereo and most aftermarket head units.

tacotunes.com System 1B

  • Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters; tacotunes.com sail panels with tacotunes tweeters
  • Rear Door Components: TT65CS rear door components.; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters will fit in stock door location.
  • Amp: tacotunes.com TXD3204v2 Four channel amplifier; Tacotunes.com TXD1001 Subwoofer amp; 100 watts x 4 to each speaker and 1000 x 1 (subwoofers)
  • Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com single 12″ subwoofer

Install photos

Frequently asked questions

Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?

Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.

Can I install a Taco Tunes system myself?

Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.

Is sound deadener worth adding to a Tundra?

Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.

Posted on

2015 Toyota Tundra CrewMax System 1B: Austin Customer Install

Patrick was thrilled with his new system! - 2015 Tundra CrewMax System 1B

A huge thank you to Patrick for making his way out to our shop from Austin, Texas!

Vehicle2015 Toyota Tundra CrewMax
SystemSystem 1B
PostedJanuary 2024
ShopTaco Tunes, San Antonio, TX

Patrick was disappointed with his factory system.
So… We got his 2015 CrewMax set up with our system 1B! He was beyond thrilled!

How the Taco Tunes system installs

Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results! In 2020 Tundra’s come equipped from the Factory Apple Car Play / Android Auto.

TacoTunes’ complete system is plug and play, completely reversible AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.

Our audio system will work with your stock stereo and most aftermarket head units.

tacotunes.com System 1B

  • Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters; tacotunes.com sail panels with tacotunes tweeters
  • Rear Door Components: TT65CS rear door components.; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters will fit in stock door location.
  • Amp: tacotunes.com TXD3204v2 Four channel amplifier; Tacotunes.com TXD1001 Subwoofer amp; 100 watts x 4 to each speaker and 1000 x 1 (subwoofers)
  • Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 12″ subwoofers; Tacotunes.com dual subwoofer enclosure

Install photos

Frequently asked questions

Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?

Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.

Do customers really drive hours for a Taco Tunes install?

Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.

Can I install a Taco Tunes system myself?

Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.

Posted on

2019 JBL Toyota Tundra CrewMax System 1B Upgrade

Love these trucks! - 2019 JBL Tundra audio upgrade

A huge thank you to Oscar for making his way out to our shop!

Vehicle2019 Toyota Tundra CrewMax JBL
SystemSystem 1B
PostedJanuary 2024
ShopTaco Tunes, San Antonio, TX

Oscar was disappointed with his factory JBL system.

So… We got his 2019 CrewMax set up with our system 1B! He was beyond thrilled!

How the Taco Tunes system installs

Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results! In 2020 Tundra’s come equipped from the Factory Apple Car Play / Android Auto.

TacoTunes’ complete system is plug and play, completely reversible AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.

Our audio system will work with your stock stereo and most aftermarket head units.

tacotunes.com System 1B

  • Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters; tacotunes.com sail panels with tacotunes tweeters
  • Rear Door Components: TT65CS rear door components.; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters will fit in stock door location.
  • Amp: tacotunes.com TXD3204v2 Four channel amplifier; Tacotunes.com TXD1001 Subwoofer amp; 100 watts x 4 to each speaker and 1000 x 1 (subwoofers)
  • Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 12″ subwoofers

Install photos

Frequently asked questions

Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?

Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.

Can I install a Taco Tunes system myself?

Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.

Will a Taco Tunes system work with an aftermarket head unit?

Yes. Our systems work with the stock stereo and most aftermarket head units, so you can upgrade the screen now or later.