A massive thank you to Steve for coming out to our shop!
Vehicle
2024 Toyota Tundra Hybrid JBL
System
System 1B
Posted
August 2025
Shop
Taco Tunes, San Antonio, TX
Steve was let down by his 2024 JBL Tundra’s audio, so we hooked him up with our killer 2022+ JBL HYBRID Tundra System 1B and full sound deadener!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Tacotunes.com 2022+ Hybrid tundra dual 10″ subwoofer enclosure installedOur amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!Our System 1B includes dual 10” subwoofers in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Tacotunes hybrid tundra amp rack and dual 10″ subwoofer enclosure installedThe JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth and 100% plug and play. Requiring ZERO cutting or splicing of your factory wiring.JBL Integration system installed and JBL amplifier put back into its factory location!Tacotunes JBL tundra front door crossover network is mounted to the amp rack on your rear wall. The crossover network is responsible for directing the proper frequency to the new tweeters in the A-Pillar and the mid bass drivers in the front door. Don’t settle for low end OEM style or coaxial speakers.Tacotunes.com TT65cs Front Door mid bass driver. Designed to work with your A-Pillar tweeter, the crossover network is mounted to the amp rack located on the rear wall of your Tundra. A true component setup! Don’t settle for OEM style or low-end coaxial speakers!Tacotunes.com TT65cs direct fit silk dome tweeters produce the crisp, clear highs that that perform amazingly well at all listening levels. These tweeters are part of a true component speaker system that communicates with the included crossover network.
Quickly & Easily installed in the factory mounting location of your A-pillar, our clip-in tweeter mounts fit seamlessly with ZERO cutting or modifications needed.3 Upgraded dash speakers waiting to be installed!Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersThe TT65 tweeter seamlessly integrates into your factory location using our custom clip-in mount, requiring absolutely no modifications. This ensures a secure and factory-looking upgrade, making it easy to enhance your sound without compromising the look of your Tundra’s interior.Previous equipment boxed up!
Frequently asked questions
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Is there a subwoofer box that fits the Hybrid Tundra?
Yes. Our Hybrid Tundra subwoofer enclosures are custom molded to fit behind the rear seat of the 2022+ Hybrid Tundra while keeping your under-seat storage.
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
A HUGE thank you to Sonia for coming BACK to our shop for ANOTHER system in one of her Tundra’s!
Vehicle
2025 Toyota Tundra JBL
System
Add-A-Subwoofer
Posted
August 2025
Shop
Taco Tunes, San Antonio, TX
Sonia brought her 2025 JBL Equipped, Tundra to our shop for a much need subwoofer upgrade. So… we got her set up with our Budget Friendly Add-A-Subwoofer System.
We also installed our Kryvo Cargo Under Tonneau Cover!
How the Taco Tunes system installs
This system, with its plug-and-play harness and line out converter, delivers upgraded bass by merging the JBL amplifier’s signals. Enjoy a significant bass boost with our easy, 100% reversible, plug & play audio system upgrade!
Tacotunes Budget Friendly add a subwoofer package
2022+ JBL EQUIPPED Tundra Budget Friendly Add a Subwoofer Complete Package – Taco Tunes – Toyota Audio Solutions
Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Amplifier Upgrade: Laser Cut Amp Rack installs alongside Tacotunes TXD1000.1 Subwoofer amp on the rear wall. This amp rack uses factory mounting locations, Don’t let audio shops drill holes in Tundra!
Rear seats were removed to assist in rear wall sound deadener matting installation. Here Tacotunes subwoofer enclosure is installed and waiting for the seats to go back into place!.Tacotunes.com 2022+ Tundra Kryvo Cargo Tool box installed!The JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth and 100% plug and play. Requiring ZERO cutting or splicing of your factory wiring.Tacotunes.com 2022+ Tundra Kryvo Cargo Tool box installs seamlessly alongside a number of tonneau bed covers! !Tacotunes dual 10” subwoofers in our ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Direct tundra integration… Keep your Factory Stereo (JBL Head Unit) and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.
Frequently asked questions
What is the difference between the Budget Add-A-Sub and the Starter kit?
Both add bass to a JBL Tundra with plug-and-play wiring. The Budget Friendly package pairs a line output converter with an external amp and ported subs, while the Starter kit uses a powered enclosure with a built-in amplifier.
Does Kryvo Cargo fit the Hybrid Tundra?
Yes. Kryvo Cargo is designed for both Hybrid and non-Hybrid 2022+ Tundras and installs beneath your factory bed cover or popular aftermarket covers.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
A HUGE thank you to Gilbert for making the trip to our shop!
Vehicle
2024 Toyota Tundra Hybrid
System
System 1B
Posted
August 2025
Shop
Taco Tunes, San Antonio, TX
Gilbert was disappointed with the audio system in his 2024 Hybrid Tundra. So.. We got him set up with our 2022+ HYBRID TUNDRA System 1B!
The system 1B that includes the following
2022+ Tundra Factory Integration System: 3 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.; NTUNE6 – LOC / Audio leveler & Bass Enhancement module
Front Door Component Speakers: Tacotunes.com TT65CS Component Speakers; Tacotunes.com Heavy Duty Front Door speaker mounts; TT65 Mid bass Drivers -100 Watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com Dash Speaker Wire Harness Adapters; Tweeters Installed in dash location using tweeter adapters.
Rear Door Components: Tacotunes.com TT65CS Component Speakers; Tacotunes.com Budget Friendly speaker mounts cut to 5.6”; TT65 Mid bass drivers Handles -100 watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Tweeter Harness Adapters; Tweeters will fit in stock door location
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; TacoTunes TT10 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!
Install photos
Our System 1B includes dual 10” subwoofer in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Our Tacotunes.com dual 10” subwoofer box fits like a glove behind your rear seat! Don’t give up your under-seat storage when you can keep it AND enjoy your music!Laser Cut / CNC Bent Amp Rack. Bolts behind your rear seat on your passenger side with a stock mounting location. Don’t let audio shops drill holes in your new Tundra! Tacotunes.com TXD1001 Subwoofer amp and TXD3204v 4 channel amp, mounted to rear wall using stock mounting location (bolts).Rear seats removed and waiting to be re-installed with tacotunes hybrid subwoofer enclosureTacotunes.com TT65cs Front Door Component Speakers. Designed to work with your dash tweeter, you can see the crossover network on the floor that will be hidden under the front kick panel. A true component setup in your Tundra. Don’t settle for OEM style or low-end coaxial speakers.TT55cs crossover network on the floor that will be hidden under the front kick panel. A true component setup in your Tundra. Don’t settle for OEM style or low-end coaxial speakers!Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersThe NTUNE6 is designed to keep your stock stereo and add aftermarket amplifiers(s) to your Toyota Tundra. When Toyota added Android Auto & Apple Car play to your Tundra, the bass and audio signal coming from the stock stereo was significantly reduced. This created many problems with bass output and speaker level output.Here is a before & after frequency response (graph) with our NTUNE 6 installed – in this 2022 Toyota Tundra. The frequency response was recorded using a LINE LEVEL RTA (not a microphone RTA). The before picture shows the roll of coming from the stock audio system. The AFTER picture shows the frequency response after we installed the NTUNE6.Direct tundra integration… Keep your stock head unit and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.
Frequently asked questions
What does the NTUNE6 do in a Tundra?
The NTUNE6 is a line output converter, audio leveler and bass enhancement module. It lets you keep your stock stereo and add aftermarket amplifiers while flattening the factory signal.
Is there a subwoofer box that fits the Hybrid Tundra?
Yes. Our Hybrid Tundra subwoofer enclosures are custom molded to fit behind the rear seat of the 2022+ Hybrid Tundra while keeping your under-seat storage.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
A big shout-out to Uday for bringing his 2025 JBL-equipped, Hybrid Tundra to our shop! Uday wanted to upgrade his factory JBL subwoofer, so we hooked him up with our 2022+ Tundra “STARTER” Add-A-Subwoofer kit.
Vehicle
2025 Toyota Tundra Hybrid JBL
System
Starter Add-A-Sub
Posted
July 2025
Shop
Taco Tunes, San Antonio, TX
How the Taco Tunes system installs
This powered subwoofer system uses a plug-and-play harness to seamlessly integrate with the JBL amplifier’s signals, delivering a significant bass boost. It’s an easy, 100% reversible, plug-and-play audio upgrade that will truly enhance your sound experience.
Onboard Amplifier: Tacotunes Mono Signal Onboard amp – Providing 350 watts RMS to the subwoofer
Subwoofer: Tacotunes TT10 – FULL SIZE 10” Subwoofer
Install photos
Tacotunes Hybrid Tundra “STARTER” Add-a-Subwoofer kit comes complete with our Hybrid Tundra powered subwoofer enclosure. This unit houses both our TT10 10” Subwoofer and a built-in amplifier, delivering a seamless and powerful bass upgradeTacotunes Hybrid Tundra “STARTER” Add-a-Subwoofer kit tucks neatly behind your rear seat. It’s designed for a convenient yet powerful bass upgrade, integrating seamlessly into your truck’s audio system without cutting or splicing any factory wires.The Tacotunes Hybrid Tundra “STARTER” Add-a-Subwoofer kit features an integrated amplifier that delivers about 350 watts RMS to a full-size TT10 10” subwoofer, ensuring powerful and clear bass for your ride without compromising your factory wiring!
Frequently asked questions
What is the difference between the Budget Add-A-Sub and the Starter kit?
Both add bass to a JBL Tundra with plug-and-play wiring. The Budget Friendly package pairs a line output converter with an external amp and ported subs, while the Starter kit uses a powered enclosure with a built-in amplifier.
Is there a subwoofer box that fits the Hybrid Tundra?
Yes. Our Hybrid Tundra subwoofer enclosures are custom molded to fit behind the rear seat of the 2022+ Hybrid Tundra while keeping your under-seat storage.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
We’re sending a massive thank you to Kevin for bringing his 2016 Tundra Crew Max to our shop!
Vehicle
2016 Toyota Tundra CrewMax
System
System 1A
Posted
July 2025
Shop
Taco Tunes, San Antonio, TX
He was ready to ditch that factory audio, so… we totally transformed it with our System 1!
How the Taco Tunes system installs
Our Tundra Direct Integration System was the perfect, easy solution. It’s designed for simplified amp upgrades, with plug-and-play installation, full reversibility, and a perfect fit using factory mounts and custom manufactured wiring harnesses! (A quick note for 2020 and newer Tundra owners: your installation process is a bit different. Because these models come with factory Apple CarPlay and Android Auto, they require an LOC (Line Output Converter), which means the equipment needed for the install will vary slightly compared to 2007-2019 Tundras)
Our audio system will work with your stock stereo and most aftermarket head units.
Rear Door Components: TT65CS rear door components.; Tacotunes.com speaker mounts; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters mounted in stock location.
Amp: tacotunes.com TXD10005 5 channel amplifier; 75 watts to each door speaker & 350 watts (RMS) to your subwoofer
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Single 12″ subwoofer
Install photos
Our Tacotunes.com single 12” subwoofer box fits like a glove behind your rear seat!Our TacoTunes Laser Cut / CNC Bent Amp Rack bolts to your factory mounting location under your passenger seat. No need to drill holes in your baby!
Mounted to our amp rack is our TXD1005 5 channel amp. This amp is used to power a SINGLE subwoofer, speakers and tweeters. Using our plug and play harness which is connected to your head unit and stock wiring, it provides your new speakers and subwoofer with the power they need to give you the best listening experience!Tacotunes.com TT65cs Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. Our TT65cs consist of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels. The laser cut crossover mount provides a secure mounting location. There is no need to settle for OEM style speakers AND do NOT recommend using mis-matched coaxial speakers.Our TT65CS tweeters are mounted in your new Sale Panels. They also use complete plug and play wiring to connect to your stock wiring. This makes their installation capable of being reversed 100% back to OEM products. Tweeter audio frequencies are HIGHLY directional. To achieve the best listening experience possible, we recommend you place these up high where nothing can block the higher frequencies.Tacotunes.com TXD1000.5 5 Channel Amplifier & CNC Bent Amp rack waiting to be installedComponent speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or low-end coaxial speakersThe crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door in the rear door. Don’t settle for low end OEM style!
New tweeter installed in stock door location.Tacotunes.com TT65cs Rear Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. Your new tweeter is located in your stock mounting location on the door panel! The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels.Our Tundra direct integration system will provide astonishing sound quality and allow you to keep your stock head unit. Most of our customers do not want to change their head unit. However, if you later decide to upgrade, our amps are designed to work with just about any aftermarket option. Whether you keep your stock one, or go aftermarket, our Tundra direct integration plug and play harness will require NO cutting or splicing any of your factory wiring. The installation can be easily 100% reversed back to OEM equipment… Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Keep under your hood clean from those loose single fuses with our Laser Cut / CNC Bent Fuse Holder Bracket! Makes adding aftermarket electrical upgrades MUCH easier AND organized!
Frequently asked questions
What is the difference between System 1A and System 1B?
System 1A is our streamlined package with front components, rear coaxials, a multi-channel amp and a single sub. System 1B steps up to more speakers, more power and dual subwoofers.
Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?
Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
A HUGE thank you to John for making his way out to our shop!
Vehicle
2020 Toyota Tundra JBL
System
System 1B
Posted
June 2025
Shop
Taco Tunes, San Antonio, TX
John was tired of the factory audio in his 2020 JBL Equipped Tundra.
So… We installed our System 1B with our fiberglass subwoofer enclosure alongside COMPLETE sound deadener matting!
How the Taco Tunes system installs
Our Tundra Direct Integration System allows you to easily add amps to your stock or aftermarket head unit (stereo) and obtain astonishing results! In 2020 Tundra’s come equipped from the Factory Apple Car Play / Android Auto and require an LOC, making their installation slightly different than the 07-19 Tundras.
TacoTunes’ complete system is plug and play, completely reversible AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.
Our audio system will work with your stock stereo and most aftermarket head units.
tacotunes.com System 1B
Front Door Component Speakers: TT65cs Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters; tacotunes.com sail panels with tacotunes tweeters
Rear Door Components: TT65CS rear door components.; Tweeters will fit in stock door location.
Amp: tacotunes.com TXD3204v4 Four channel amplifier; Tacotunes.com TXD1000.1 Subwoofer amp; 100 watts x 4 to each speaker and 1000 x 1 (subwoofers)
Our Tacotunes.com dual 12” fiberglass subwoofer box consists of 4.2 Cubic ft of air space AND fits like a glove behind your rear seat! No need to settle for shallow sounding shallow mount subwoofers!Tacotunes fiberglass subwoofer enclosure waiting to be installed!Our TacoTunes Laser Cut / CNC Bent Amp Rack bolts to your factory mounting location under your passenger seat. Don’t let anyone drill holes in your baby!
Mounted to the stock mounting locations are the TXD3204v 4 channel amp and TXD1001 subwoofer amp. Using our plug and play harness which is connected to your head unit, these amps provide your new speakers and subwoofer(s) with the power they need for you to have the most ideal listening experience.TT65cs Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. The TT65cs consist of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels. The laser cut crossover mount provides a secure mounting location. There is no need to settle for OEM style speakers AND do NOT recommend using mis-matched coaxial speakers.TT65cs tweeters are mounted in our sail panels. They consist of complete plug and play wiring, which requires ZERO cutting and splicing of your factory wires, making their installation 100% reversible. Tweeter audio frequencies are HIGHLY directional. For the best listening experience, we suggest placing these up high and out of the way where nothing can block the higher frequencies.Component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or low-end coaxial speakersThe crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door in the rear door. Don’t settle for low end OEM style!
New tweeter installed in stock door location.A closer look at the TT65cs rear door midbass driverOur Taco tunes TT65cs Rear door speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersOur Tundra direct integration system will provide astonishing sound quality and allow you to keep your stock head unit. Most of our customers do not want to change their head unit. However, if you later decide to upgrade, our amps are designed to work with just about any aftermarket option. Whether you keep your stock one, or go aftermarket, our tundra direct integration plug and play harness will require NO cutting or splicing any of your factory wiring. The installation can be easily 100% reversed back to OEM equipment… Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Keep under your hood clean from those loose single fuses with our Laser Cut / CNC Bent Fuse Holder Bracket! Makes adding aftermarket electrical upgrades MUCH easier AND organized!Keep your factory equipment in the event of trade in with tacotunes 100% reversible audio system!Rear wall matted and ready for the subwoofer enclosure!
Frequently asked questions
Why do 2020 and newer Tundras need an LOC?
Starting in 2020, Tundras came with factory Apple CarPlay and Android Auto. Adding amplifiers to those head units requires a line output converter (LOC), so the equipment is slightly different from 2007-2019 trucks.
What is the advantage of a fiberglass subwoofer enclosure?
A custom fiberglass enclosure can be molded to the truck’s shape, giving maximum air space behind the rear seat. More air space lets the subwoofers play deeper and louder.
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
We’re sending a massive thank you to John for bringing his 2018 Tundra Crew Max to our shop!
Vehicle
2018 Toyota Tundra CrewMax
System
System 1A
Posted
May 2025
Shop
Taco Tunes, San Antonio, TX
He was ready to ditch that factory audio, so… we totally transformed it with our System 1!
How the Taco Tunes system installs
Our Tundra Direct Integration System was the perfect, easy solution. It’s designed for simplified amp upgrades, with plug-and-play installation, full reversibility, and a perfect fit using factory mounts and custom manufactured wiring harnesses! (A quick note for 2020 and newer Tundra owners: your installation process is a bit different. Because these models come with factory Apple CarPlay and Android Auto, they require an LOC (Line Output Converter), which means the equipment needed for the install will vary slightly compared to 2007-2019 Tundras)
Our audio system will work with your stock stereo and most aftermarket head units.
Rear Door Components: TT65CS rear door components.; Tacotunes.com speaker mounts; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters mounted in stock location.
Amp: tacotunes.com TXD10005 5 channel amplifier; 75 watts to each door speaker & 350 watts (RMS) to your subwoofer
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Single 12″ subwoofer
Install photos
Our Tacotunes.com single 12” subwoofer box fits like a glove behind your rear seat!Our TacoTunes Laser Cut / CNC Bent Amp Rack bolts to your factory mounting location under your passenger seat. No need to drill holes in your baby!
Mounted to our amp rack is our TXD1005 5 channel amp. This amp is used to power a SINGLE subwoofer, speakers and tweeters. Using our plug and play harness which is connected to your head unit and stock wiring, it provides your new speakers and subwoofer with the power they need to give you the best listening experience!Tacotunes.com TT65cs Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. Our TT65cs consist of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels. The laser cut crossover mount provides a secure mounting location. There is no need to settle for OEM style speakers AND do NOT recommend using mis-matched coaxial speakers.Our TT65CS tweeters are mounted in your new Sale Panels. They also use complete plug and play wiring to connect to your stock wiring. This makes their installation capable of being reversed 100% back to OEM products. Tweeter audio frequencies are HIGHLY directional. To achieve the best listening experience possible, we recommend you place these up high where nothing can block the higher frequencies.The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door in the rear door. Don’t settle for low end OEM style!
New tweeter installed in stock door location.Our Tundra direct integration system will provide astonishing sound quality and allow you to keep your stock head unit. Most of our customers do not want to change their head unit. However, if you later decide to upgrade, our amps are designed to work with just about any aftermarket option. Whether you keep your stock one, or go aftermarket, our Tundra direct integration plug and play harness will require NO cutting or splicing any of your factory wiring. The installation can be easily 100% reversed back to OEM equipment… Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Tacotunes.com TT65cs Rear Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. Your new tweeter is located in your stock mounting location on the door panel! The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels.Component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or low-end coaxial speakersFactory Audio equipment removed!
Frequently asked questions
What is the difference between System 1A and System 1B?
System 1A is our streamlined package with front components, rear coaxials, a multi-channel amp and a single sub. System 1B steps up to more speakers, more power and dual subwoofers.
Why do 2020 and newer Tundras need an LOC?
Starting in 2020, Tundras came with factory Apple CarPlay and Android Auto. Adding amplifiers to those head units requires a line output converter (LOC), so the equipment is slightly different from 2007-2019 trucks.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
We’re incredibly grateful to Jesse, who traveled all the way from Austin, Texas, to our shop!
Vehicle
2022 Toyota Tundra
System
Starter Add-A-Subwoofer
Posted
May 2025
Shop
Taco Tunes, San Antonio, TX
With past vehicles featuring impressive audio setups, Jesse was looking to perfectly complement his 2022 Base Audio Tundra’s existing factory sound with some added bass.
So… we got him set up with our “starter” add-a-subwoofer kit alongside rear wall sound deadener, and he couldn’t stop grinning!
2022+ Tundra “Sarter” Add a Subwoofer Kit includes-
2022+ Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Amps: 500 Watt Onboard Amplifier – integrated into subwoofer enclosure
Our Tacotunes.com single 10” subwoofer box fits like a glove behind your rear seat! 500 watt Onboard Amplifier powers tacotunes TT10 FULL SIZE Subwoofer!
Don’t give up your under-seat storage when you can keep it AND enjoy your music!Direct tundra integration… Keep your stock head unit and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Keep under your hood clean from those loose single fuses with our Laser Cut / CNC Bent Fuse Holder Bracket! Makes adding aftermarket electrical upgrades MUCH easier AND organized!Love seeing these badges come through our doors!TRD Off Road!
Frequently asked questions
Can I add a subwoofer to a base audio 2022 Tundra?
Yes. The Starter Add-A-Subwoofer kit works with base audio Tundras, using a 2-harness plug-and-play integration and a powered enclosure with a 500-watt onboard amp.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
We extend a big thank you to Enrique for visiting our shop with his 2024 NON-HYBRID Tundra!
Vehicle
2024 Toyota Tundra
Posted
May 2025
Shop
Taco Tunes, San Antonio, TX
Enrique came to us with a previously installed subwoofer system in his tundra. Unfortunately, the previous installers spliced is factory wires and the bass output from his previous subwoofer system did not meet his expectations.
He was looking to significantly upgrade his audio, specifically wanting his speakers LOUD and also wanting 12-inch subwoofers to enhance the factory JBL system.
Since he lives around the corner, Enrique agreed to be our “Test Subject”, and we asked him to choose between our TT10” subwoofers, or shallow mount 12” subwoofers.
So… with a little extra time, We custom-installed our “upgraded” System 1b for him, which included 150 watts to each door speaker (our regular system 1b is 100watts x4) and two 12-inch shallow mount subwoofers, expertly fitted into our HYBRID Tundra subwoofer enclosure.
Enrique called us back stating the 12-inch shallow mount subwoofers lacked the depth he desired. He came back to swap over to our TT10 full-size subwoofers, and the difference was clear: he left thrilled by the richer, more immersive audio experience.
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
JBL Tundra Component Speaker package: CXS64 Mid bass Drivers -150 Watts RMS; CXS64 Crossovers; CXS64 Tweeters; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com speaker mounts cut to 5.6”; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers x3; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: 150 watts RMS x4 – four channel amplifier; tacotunes.com TXD1000.1 – Mono subwoofer amplifier; 150 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Enrique’s previous audio/subwoofer set up.CXS64 Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. The CXS64 consists of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels.Tacotunes.com TT65cs direct fit silk dome tweeters produce the crisp, clear highs that that perform amazingly well at all listening levels. These tweeters are part of a true component speaker system that connects to the included crossover network.
Quickly & Easily installed in the factory mounting location of your A-pillar, our clip-in tweeter mounts fit seamlessly with ZERO cutting or modifications needed.3 Upgraded Dash speakers!Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersThe TT65 tweeter seamlessly integrates into your factory location using our custom clip-in mount, requiring absolutely no modifications. This ensures a secure and factory-looking upgrade, making it easy to enhance your sound without compromising the look of your Tundra’s interior.Our amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is the 150 watt x4, and 4 Channel Amp, TXD1000.1 subwoofer amp, with TT65cs Front door crossover network hidden under the storage copartment. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!The JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth and 100% plug and play. Requiring ZERO cutting or splicing of your factory wiring.The pre-amp audio signal is routed to the AVC/LAN interface module then provides that clean flat signal directly to the TXD3204 (4 Channel) & TXD10001 (subwoofer amp). The amps then provide the amplified signal to your speakers via the plug and play speaker harness integration system. There is no need to run new speaker wire. NO cutting or splicing ANY of your factory wires. The system is completely reversible.Plug & Play Harness Connections.Bass knob installed in factory location. Allowing you to adjust your subwoofers to your liking!
Frequently asked questions
Are shallow-mount 12″ subs better than full-size 10″ subs in a Tundra?
Not in our experience. Enrique tried two 12″ shallow-mount subs first, but they lacked depth. After switching to our full-size TT10 10″ subwoofers, he got richer, deeper bass.
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Why shouldn’t an audio shop splice my Tundra’s factory wiring?
Cutting or splicing factory wiring can damage JBL components and create problems that are expensive to repair. We repair a large number of JBL-equipped Toyotas for this reason, and there is no need to cut anything with plug-and-play harnesses.
A HUGE thank you to Jimmy for making the trip to our shop!
Vehicle
2024 Toyota Tundra Hybrid
System
System 1B
Posted
May 2025
Shop
Taco Tunes, San Antonio, TX
Jimmy was disappointed with the audio system in his 2024 Hybrid Tundra. So.. We got him set up with our 2022+ HYBRID TUNDRA System 1B along with sound deadening on the rear wall!
The system 1B that includes the following
2022+ Tundra Factory Integration System: 3 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.; NTUNE6 – LOC / Audio leveler & Bass Enhancement module
Front Door Component Speakers: Tacotunes.com TT65CS Component Speakers; Tacotunes.com Heavy Duty Front Door speaker mounts; TT65 Mid bass Drivers -100 Watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com Dash Speaker Wire Harness Adapters; Tweeters Installed in dash location using tweeter adapters.
Rear Door Components: Tacotunes.com TT65CS Component Speakers; Tacotunes.com Heavy Duty speaker mounts cut to 5.6”; TT65 Mid bass drivers Handles -100 watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Tweeter Harness Adapters; Tweeters will fit in stock door location
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD1000.1 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Tacotunes hybrid subwoofer enclosure installedTacotunes hybrid subwoofer enclosure assembled and waiting to be installed!Laser Cut / CNC Bent Amp Rack. Bolts behind your rear seat on your passenger side with a stock mounting location. Don’t let audio shops drill holes in your new Tundra! Tacotunes.com TXD1001 Subwoofer amp and TXD3204v 4 channel amp, mounted to rear wall using stock mounting location (bolts).The NTUNE6 is designed to keep your stock stereo and add aftermarket amplifiers(s) to your Toyota Tundra. When Toyota added Android Auto & Apple Car play to your Tundra, the bass and audio signal coming from the stock stereo was significantly reduced. This created many problems with bass output and speaker level output.Here is a before & after frequency response (graph) with our NTUNE 6 installed – in this 2022 Toyota Tundra. The frequency response was recorded using a LINE LEVEL RTA (not a microphone RTA). The before picture shows the roll of coming from the stock audio system. The AFTER picture shows the frequency response after we installed the NTUNE6.Tacotunes.com TT65cs Front Door Component Speakers. Designed to work with your dash tweeter, you can see the crossover network on the floor that will be hidden under the front kick panel. A true component setup in your Tundra. Don’t settle for OEM style or low-end coaxial speakers!A closer look at tacotunes TT65cs front door midbass driver and heavy duty front door speaker mount!Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersRear Seats removed and waiting to be re-installed!Rear wall matted and tacotunes plug & play wiring ready to be connected!Direct tundra integration… Keep your stock head unit and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Bass knob installed in factory location. Allowing you to adjust your subwoofers to your liking!
Frequently asked questions
What does the NTUNE6 do in a Tundra?
The NTUNE6 is a line output converter, audio leveler and bass enhancement module. It lets you keep your stock stereo and add aftermarket amplifiers while flattening the factory signal.
Is there a subwoofer box that fits the Hybrid Tundra?
Yes. Our Hybrid Tundra subwoofer enclosures are custom molded to fit behind the rear seat of the 2022+ Hybrid Tundra while keeping your under-seat storage.
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
A massive thank you to the Tomas for coming out to our shop a SECOND time!
Vehicle
2023 Toyota Tundra JBL
System
System 1B
Posted
May 2025
Shop
Taco Tunes, San Antonio, TX
Tomas was let down by his 2023+ JBL Tundra’s audio, so we hooked him up with our killer 2022+ JBL Tundra System 1B and full sound deadening!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes Dual 10 HYBRID Subwoofer Enclosure; Tacotunes.com Dual 10″ subwoofers; TacoTunes TT10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!
Install photos
Tacotunes 2022+ Tundra NON-HYBRID Dual 10″ subwoofer enclosure assembled with tacotunes TT10″ FULL SIZE Subwoofers waiting for the rear seats to be put back into place.Our amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!Our System 1B includes dual 10” subwoofers in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Tacotunes 2022+ NON-HYBRID dual 10″ subwoofer enclosure installedTacotunes.com TT65cs Front Door mid bass driver. Designed to work with your A-Pillar tweeter, the crossover network is mounted to the amp rack located on the rear wall of your Tundra. A true component setup! Don’t settle for OEM style or low-end coaxial speakers!Tacotunes.com TT65cs direct fit silk dome tweeters produce the crisp, clear highs that that perform amazingly well at all listening levels. These tweeters are part of a true component speaker system that connects to the included crossover network.
Quickly & Easily installed in the factory mounting location of your A-pillar, our clip-in tweeter mounts fit seamlessly with ZERO cutting or modifications needed.Tacotunes TT65 midbass driver installed in the driver’s front doorTacotunes JBL tundra front door crossover network is mounted to the amp rack on your rear wall. The crossover network is responsible for directing the proper frequency to the new tweeters in the A-Pillar and the mid bass drivers in the front door. Don’t settle for low end OEM style or coaxial speakers.3 Upgraded dash speakers replace the factory dash speakersThe TT65 tweeter seamlessly integrates into your factory location using our custom clip-in mount, requiring absolutely no modifications. This ensures a secure and factory-looking upgrade, making it easy to enhance your sound without compromising the look of your Tundra’s interior.Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersTacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.The JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth and 100% plug and play. Requiring ZERO cutting or splicing of your factory wiring.The pre-amp audio signal is routed to the AVC/LAN interface module then provides that clean flat signal directly to the TXD3204 (4 Channel) & TXD10001 (subwoofer amp). The amps then provide the amplified signal to your speakers via the plug and play speaker harness integration system. There is no need to run new speaker wire. NO cutting or splicing ANY of your factory wires. The system is completely reversible.
Frequently asked questions
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
Double Tundra Dayz! 😊 One Hybrid & One Non Hybrid, both trucks getting “redos”. Both of these trucks came in with system installed and owners were not happy with the previous setup.
Vehicle
Toyota Tundra
Posted
May 2025
Shop
Taco Tunes, San Antonio, TX
The white Tundra is a 2024 Toyota Tundra CrewMax LTD NON Hybrid. It has a 6” lift and 37” tires. We will post detailed pics of the new system installation soon.
His current system was an “under seat” subwoofer box with dual 8” subwoofers. The customer was not happy with the tonal quality and the lack of bass coming from the current setup.
The Black Tundra, the owner does not want pics. So no deets, but it is the 3rd Capstone (all Black) we have had in here.
BTW, we had to repair the wire harnesses. DO NOT LET audio shops chop up your stock wiring. There is NO REASON to hack up your stock wiring. Unfortunately, we have to perform repairs on a large number of JBL equipped Toyotas.
Install photos
Frequently asked questions
Why shouldn’t an audio shop splice my Tundra’s factory wiring?
Cutting or splicing factory wiring can damage JBL components and create problems that are expensive to repair. We repair a large number of JBL-equipped Toyotas for this reason, and there is no need to cut anything with plug-and-play harnesses.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.