A HUGE thank you to Troy for making the trip out to our shop from Houston, Texas…. A 6 hour round trip!!!
Vehicle
2024 Toyota Tundra Hybrid JBL
System
System 1B
Posted
April 2025
Shop
Taco Tunes, San Antonio, TX
Troy could not tolerate the factory audio in his 2024 HYBRID Tundra. So… We got him set up with our 2022+ JBL Hybrid Tundra system 1B, along with COMPLETE sound deadener matting!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD1000.1 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Tacotunes hybrid subwoofer enclosure installedOur amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!Tacotunes Hybrid Tundra Dual subwoofer enclosure includes two 10” subwoofers in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Tacotunes JBL tundra front door crossover network is mounted to the amp rack on your rear wall. The crossover network is responsible for directing the proper frequency to the new tweeters in the A-Pillar and the mid bass drivers in the front door. Don’t settle for low end OEM style or coaxial speakers.Tacotunes.com TT65cs direct fit silk dome tweeters produce the crisp, clear highs that that perform amazingly well at all listening levels. These tweeters are part of a true component speaker system that connects to the included crossover network.Bass knob installed in factory location. Allowing you to adjust your subwoofers to your liking!Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersTacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.The JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth.and 100% plug and play. Requiring ZERO cutting or splicing of your factory wiring.The pre-amp audio signal is routed to the AVC/LAN interface module then provides that clean flat signal directly to the TXD3204 (4 Channel) & TXD10001 (subwoofer amp). The amps then provide the amplified signal to your speakers via the plug and play speaker harness integration system. There is no need to run new speaker wire. NO cutting or splicing ANY of your factory wires. The system is completely reversible.Plug & Play Harness Connections.Direct tundra integration… Keep your Factory Stereo (JBL Head Unit) and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.
Frequently asked questions
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Is there a subwoofer box that fits the Hybrid Tundra?
Yes. Our Hybrid Tundra subwoofer enclosures are custom molded to fit behind the rear seat of the 2022+ Hybrid Tundra while keeping your under-seat storage.
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
A HUGE thank you to Michael for making the trip out to our shop from Amarillo, Texas…. A 14 hour round trip!!!
Vehicle
2022 Toyota Tundra Hybrid JBL
System
System 1B
Customer from
Amarillo
Posted
March 2025
Shop
Taco Tunes, San Antonio, TX
Michael could not tolerate the factory audio in his 2022 HYBRID Tundra. So… We got him set up with our 2022+ JBL Hybrid Tundra system 1B, along with COMPLETE sound deadener matting!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B:
2022+ JBL Tundra Factory Integration System
2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Tacotunes hybrid subwoofer enclosure installed alongside Tacotunes 2022+ Tundra rear wall amp rack!Tacotunes Hybrid Tundra Dual subwoofer enclosure includes two 10” subwoofers in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Our amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!Tacotunes.com TT65cs Front Door mid bass driver. Designed to work with your A-Pillar tweeter, the crossover network is mounted to the amp rack located on the rear wall of your Tundra. A true component setup! Don’t settle for OEM style or low-end coaxial speakers!Tacotunes.com TT65cs direct fit silk dome tweeters produce the crisp, clear highs that that perform amazingly well at all listening levels. These tweeters are part of a true component speaker system that connects to the included crossover network.
Quickly & Easily installed in the factory mounting location of your A-pillar, our clip-in tweeter mounts fit seamlessly with ZERO cutting or modifications needed.THREE upgraded dash speakers replace you OEM ones!Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.TT65 rear door crossover network is mounted using our laser cut crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersThe TT65 tweeter seamlessly integrates into your factory location using our custom clip-in mount, requiring absolutely no modifications. This ensures a secure and factory-looking upgrade, making it easy to enhance your sound without compromising the look of your Tundra’s interior.Tacotunes 2022+ JBL Tundra integration system waiting to be installed!The JBL Integration system fits (hides) under the stock amp. The entire audio system is completely stealth and 100% plug and play. Requiring ZERO cutting or splicing of your factory wiringDirect tundra integration… Keep your Factory Stereo (JBL Head Unit) and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Keep for factory equipment with our 100% reversible audio system in case you decide to trade in your tundra!Bass knob installed in factory location. Allowing you to adjust your subwoofers to your liking!
Frequently asked questions
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
Do customers really drive hours for a Taco Tunes install?
Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.
We’re sending a massive thank you to Dave for bringing his 2018 Tundra Crew Max to our shop!
Vehicle
2018 Toyota Tundra CrewMax
System
System 1
Posted
March 2025
Shop
Taco Tunes, San Antonio, TX
He was ready to ditch that underwhelming factory audio AND head unit. So… we totally transformed it with our System 1 alongside front door sound deadener matting!
How the Taco Tunes system installs
Our Tundra Direct Integration System was the perfect, easy solution. It’s designed for simplified amp upgrades, with plug-and-play installation, full reversibility, and a perfect fit using factory mounts and custom manufactured wiring harnesses! (A quick note for 2020 and newer Tundra owners: your installation process is a bit different. Because these models come with factory Apple CarPlay and Android Auto, they require an LOC (Line Output Converter), which means the equipment needed for the install will vary slightly compared to 2007-2019 Tundras)
Our audio system will work with your stock stereo and most aftermarket head units.
Rear Door Components: TT65CS rear door components.; Tacotunes.com speaker mounts; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters mounted in stock location.
Amp: tacotunes.com TXD10005 5 channel amplifier; 75 watts to each door speaker & 350 watts (RMS) to your subwoofer
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Single 12″ subwoofer
Install photos
Component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or low-end coaxial speakersTacotunes.com TT65cs Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. Our TT65cs consist of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels. The laser cut crossover mount provides a secure mounting location. There is no need to settle for OEM style speakers AND do NOT recommend using mis-matched coaxial speakers.Our TT65CS tweeters are mounted in your new Sale Panels. They also use complete plug and play wiring to connect to your stock wiring. This makes their installation capable of being reversed 100% back to OEM products. Tweeter audio frequencies are HIGHLY directional. To achieve the best listening experience possible, we recommend you place these up high where nothing can block the higher frequencies.The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door in the rear door. Don’t settle for low end OEM style!
New tweeter installed in stock door location.Our Tacotunes.com single 12” subwoofer box fits like a glove behind your rear seat!Our TacoTunes Laser Cut / CNC Bent Amp Rack bolts to your factory mounting location under your passenger seat. No need to drill holes in your baby!
Mounted to our amp rack is our TXD1005 5 channel amp. This amp is used to power a SINGLE subwoofer, speakers and tweeters. Using our plug and play harness which is connected to your head unit and stock wiring, it provides your new speakers and subwoofer with the power they need to give you the best listening experience!Our Tundra direct integration system will provide astonishing sound quality and allow you to keep your stock head unit. Most of our customers do not want to change their head unit. However, if you later decide to upgrade, our amps are designed to work with just about any aftermarket option. Whether you keep your stock one, or go aftermarket, our Tundra direct integration plug and play harness will require NO cutting or splicing any of your factory wiring. The installation can be easily 100% reversed back to OEM equipment… Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Keep under your hood clean from those loose single fuses with our Laser Cut / CNC Bent Fuse Holder Bracket! Makes adding aftermarket electrical upgrades MUCH easier AND organized!
Frequently asked questions
Will a Taco Tunes system work with an aftermarket head unit?
Yes. Our systems work with the stock stereo and most aftermarket head units, so you can upgrade the screen now or later.
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?
Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.
A HUGE thank you to Sergio for making his way out to our shop!
Vehicle
2017 Toyota Tundra CrewMax
System
System 1B
Posted
November 2024
Shop
Taco Tunes, San Antonio, TX
Sergio was tired of the factory audio in his 2017 Tundra… So… We installed our system 1B with COMPLETE sound deadener matting in his 2017 CrewMax!
How the Taco Tunes system installs
Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results! In 2020 Tundra’s come equipped from the Factory Apple Car Play / Android Auto and require an LOC, making their installation slightly different than the 07-19 Tundras.
TacoTunes’ complete system is plug and play, completely reversible AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.
Our audio system will work with your stock stereo and most aftermarket head units.
tacotunes.com System 1B
Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters; tacotunes.com sail panels with tacotunes tweeters
Rear Door Components: TT65CS rear door components.; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters will fit in stock door location.
Amp: tacotunes.com TXD3204v2 Four channel amplifier; Tacotunes.com TXD1000.1 Subwoofer amp; 100 watts x 4 to each speaker and 1000 x 1 (subwoofers)
Sergio was all smiles after hearing his new sysetm!Our System 1B includes a dual 12” subwoofer in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Our Tacotunes.com dual 12” subwoofer box fits like a glove behind your rear seat! No need to settle for shallow sounding shallow mount subwoofers!Our TacoTunes Laser Cut / CNC Bent Amp Rack bolts to your factory mounting location under your passenger seat. Don’t let anyone drill holes in your baby!
Mounted to the stock mounting locations are the TXD3204v 4 channel amp and TXD1001 subwoofer amp. Using our plug and play harness which is connected to your head unit, these amps provide your new speakers and subwoofer(s) with the power they need for you to have the most ideal listening experience.TT65cs Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. The TT65cs consist of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels. The laser cut crossover mount provides a secure mounting location. There is no need to settle for OEM style speakers AND do NOT recommend using mis-matched coaxial speakers.A closer look at the TT65cs Front door midbass driverTT65cs tweeters are mounted in our sail panels. They consist of complete plug and play wiring, which requires ZERO cutting and splicing of your factory wires, making their installation 100% reversible. Tweeter audio frequencies are HIGHLY directional. For the best listening experience, we suggest placing these up high and out of the way where nothing can block the higher frequencies.We offer plug and play wiring that makes it easy to install new tweeters/speakers, without having to cut or splice any wires.Component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or low-end coaxial speakersOur Taco tunes TT65cs Rear door speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersThe crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door in the rear door. Don’t settle for low end OEM style!
New tweeter installed in stock door location.Our Tundra direct integration system will provide astonishing sound quality and allow you to keep your stock head unit. Most of our customers do not want to change their head unit. However, if you later decide to upgrade, our amps are designed to work with just about any aftermarket option. Whether you keep your stock one, or go aftermarket, our tundra direct integration plug and play harness will require NO cutting or splicing any of your factory wiring. The installation can be easily 100% reversed back to OEM equipment… Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Tacotunes dual 12″ sub enclosure waiting to be installed!Rear wall in the process of getting matted – Sound deadener matting helps minimize road noise and rattling with our MAJOR bass upgrades!
Frequently asked questions
Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?
Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
A HUGE thank you to Hector for making his way out to our shop!
Vehicle
2020 Toyota Tundra
System
System 1A
Posted
October 2024
Shop
Taco Tunes, San Antonio, TX
Hector came to us unsatisfied with his 2020 Tundra’s audio system after he upgraded his head unit.
So, we got him set up with our system 1A with COMPLETE sound deadener!
How the Taco Tunes system installs
Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results!
Our complete system is plug and play completely reversible ( ZERO cutting and splicing of stock wires) AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.
Our audio system will work with your stock stereo and most aftermarket head units.
Rear Door Components: TT65CS rear door components.; Tacotunes.com speaker mounts; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters mounted in stock location.
Amp: tacotunes.com TXD1000.5 – 5 channel amplifier; 75 watts to each door speaker & 350 watts (RMS) to your subwoofer
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Single 12″ subwoofer
Install photos
Our Tacotunes.com single 12” subwoofer box fits like a glove behind your rear seat!Tacotunes.com TT65cs Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. Our TT65cs consist of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels. The laser cut crossover mount provides a secure mounting location. There is no need to settle for OEM style speakers AND do NOT recommend using mis-matched coaxial speakers.Component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or low-end coaxial speakersThe crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door in the rear door. Don’t settle for low end OEM style!
New tweeter installed in stock door location.Our TacoTunes Laser Cut / CNC Bent Amp Rack bolts to your factory mounting location under your passenger seat. No need to drill holes in your baby!
Mounted to our amp rack is our TXD1005 5 channel amp. This amp is used to power a SINGLE subwoofer, speakers and tweeters. Using our plug and play harness which is connected to your head unit and stock wiring, it provides your new speakers and subwoofer with the power they need to give you the best listening experience!Our Tundra direct integration system will provide astonishing sound quality and allow you to keep your stock head unit. Most of our customers do not want to change their head unit. However, if you later decide to upgrade, our amps are designed to work with just about any aftermarket option. Whether you keep your stock one, or go aftermarket, our Tundra direct integration plug and play harness will require NO cutting or splicing any of your factory wiring. The installation can be easily 100% reversed back to OEM equipment… Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Rear wall matted and ready for the subwoofer enclosure!
Frequently asked questions
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
Will a Taco Tunes system work with an aftermarket head unit?
Yes. Our systems work with the stock stereo and most aftermarket head units, so you can upgrade the screen now or later.
Why do 2020 and newer Tundras need an LOC?
Starting in 2020, Tundras came with factory Apple CarPlay and Android Auto. Adding amplifiers to those head units requires a line output converter (LOC), so the equipment is slightly different from 2007-2019 trucks.
A HUGE thank you to Anthony for making the trip out to our shop a SECOND time!
Vehicle
2024 Toyota Tundra JBL
System
System 1B
Posted
July 2024
Shop
Taco Tunes, San Antonio, TX
Anthony had us install our system 1 in his 2015 tundra last year. After upgrading to a 2024 tundra he was NOT impressed by the JBL system.
So…. we got his new 2024 crew max set up with our 2022+ JBL Tundra system 1B with COMPLETE sound deadener matting, and he was all smiles!
How the Taco Tunes system installs
Taco Tunes’ plug-and-play JBL integration system grabs a clean, unmodified signal before your factory amp, feeding your new amplifiers a consistently flat audio signal.
Upgrade to crystal-clear highs, well-defined mids, and powerful bass with Taco Tunes’ plug-and-play JBL integration system. It installs seamlessly, requiring zero modifications to your factory wiring.
The 2022+ Tundra JBL System 1B includes the following
2022+ JBL Tundra Factory Integration System: 2 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.
Tacotunes.com TT65CS Front Component Speakers: TT65 Mid bass Drivers -100 Watts RMS; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossovers; TT65 Tweeters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory A-Pillar location); 3.5” dash replacement speakers; Tacotunes.com Dash Speaker Wire Harness Adapters
TacoTunes.com TT65CS Rear Door Component speakers: TT65 Mid bass drivers Handles -100 watts RMS; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Crossover; Tacotunes Heavy duty rear door crossover mount; TT65 Tweeters; Tacotunes.com Tweeter Harness Adapters; Tacotunes.com Clip in tweeter mounts (Tweeters fit in factory door location)
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; Image Dynamics ID10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!
Install photos
Our System 1B includes dual 10” subwoofers in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Our Tacotunes.com dual 10” subwoofer box fits like a glove behind your rear seat! Don’t give up your under-seat storage when you can keep it AND enjoy your music!Our amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! Mounted to your Amp rack is Tacotunes.com TXD3204v3 4 Channel Amp, TXD1000.1 subwoofer amp, and TT65cs Front door crossover network. With our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!3 Upgraded dash speakers!Tacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.Tacotunes JBL tundra front door crossover network is mounted to the amp rack on your rear wall. The crossover network is responsible for directing the proper frequency to the new tweeters in the A-Pillar and the mid bass drivers in the front door. Don’t settle for low end OEM style or coaxial speakers.A closer look at tacotunes TT65cs rear door midbass driverThe TT65 tweeter seamlessly integrates into your factory location using our custom clip-in mount, requiring absolutely no modifications. This ensures a secure and factory-looking upgrade, making it easy to enhance your sound without compromising the look of your Tundra’s interior.
Frequently asked questions
How does Taco Tunes integrate with the factory JBL system?
Our plug-and-play JBL integration system grabs a clean, unmodified signal before the factory amplifier and feeds your new amplifiers a consistently flat audio signal, with zero changes to factory wiring.
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
A HUGE thank you to Omar for making his way out to our shop!
Vehicle
2017 Toyota Tundra CrewMax
System
System 1B
Posted
July 2024
Shop
Taco Tunes, San Antonio, TX
Omar was disappointed with the factory audio in his tundra.. SO, he took advantage of our 4th of July sale, and we got his 2017 CrewMax set up with our system 1B WITH sound deadener matting on the rear wall!
How the Taco Tunes system installs
Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results! In 2020 Tundra’s come equipped from the Factory Apple Car Play / Android Auto.
TacoTunes’ complete system is plug and play, completely reversible AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.
Our audio system will work with your stock stereo and most aftermarket head units.
tacotunes.com System 1B
Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters; tacotunes.com sail panels with tacotunes tweeters
Rear Door Components: TT65CS rear door components.; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters will fit in stock door location.
Amp: tacotunes.com TXD3204v2 Four channel amplifier; Tacotunes.com TXD1000.1 Subwoofer amp; 100 watts x 4 to each speaker and 1000 x 1 (subwoofers)
Our Tacotunes.com dual 12” subwoofer box fits like a glove behind your rear seat! No need to settle for shallow sounding shallow mount subwoofers!We offer plug and play wiring that makes it easy to install new tweeters/speakers, without having to cut or splice any wires.TT65cs Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. The TT65cs consist of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels. The laser cut crossover mount provides a secure mounting location. There is no need to settle for OEM style speakers AND do NOT recommend using mis-matched coaxial speakers.Component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or low-end coaxial speakersThe crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door in the rear door. Don’t settle for low end OEM style!
New tweeter installed in stock door location.
Frequently asked questions
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?
Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
A HUGE thank you to Jose for making his way out to our shop!
Vehicle
2016 Toyota Tundra CrewMax
System
System 1B
Posted
July 2024
Shop
Taco Tunes, San Antonio, TX
Jose was disappointed with the factory audio in his tundra.. SO, he took advantage of our 4th of July sale, and we got his 2016 CrewMax set up with our system 1B with COMPLETE sound deadener matting!
How the Taco Tunes system installs
Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results! In 2020 Tundra’s come equipped from the Factory Apple Car Play / Android Auto.
TacoTunes’ complete system is plug and play, completely reversible AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.
Our audio system will work with your stock stereo and most aftermarket head units.
tacotunes.com System 1B
Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters; tacotunes.com sail panels with tacotunes tweeters
Rear Door Components: TT65CS rear door components.; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters will fit in stock door location.
Amp: tacotunes.com TXD3204v2 Four channel amplifier; Tacotunes.com TXD100.1 Subwoofer amp; 100 watts x 4 to each speaker and 1000 x 1 (subwoofers)
These trucks never get old!Our Tacotunes.com dual 12” subwoofer box fits like a glove behind your rear seat! No need to settle for shallow sounding shallow mount subwoofers!Our TacoTunes Laser Cut / CNC Bent Amp Rack bolts to your factory mounting location under your passenger seat. Don’t let anyone drill holes in your baby!
Mounted to the stock mounting locations are the TXD3204v 4 channel amp and TXD1001 subwoofer amp. Using our plug and play harness which is connected to your head unit, these amps provide your new speakers and subwoofer(s) with the power they need for you to have the most ideal listening experience.Component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or low-end coaxial speakersTT65cs Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. The TT65cs consist of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels. The laser cut crossover mount provides a secure mounting location. There is no need to settle for OEM style speakers AND do NOT recommend using mis-matched coaxial speakers.TT65cs tweeters are mounted in our sail panels. They consist of complete plug and play wiring, which requires ZERO cutting and splicing of your factory wires, making their installation 100% reversible. Tweeter audio frequencies are HIGHLY directional. For the best listening experience, we suggest placing these up high and out of the way where nothing can block the higher frequencies.A closer look at the TT65cs front door midbass driverThe crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door in the rear door. Don’t settle for low end OEM style!
New tweeter installed in stock door location.A closer look at the TT65cs Rear door midbass driverRear wall matted and ready for the sub enclosure to be installed!Our Tundra direct integration system will provide astonishing sound quality and allow you to keep your stock head unit. Most of our customers do not want to change their head unit. However, if you later decide to upgrade, our amps are designed to work with just about any aftermarket option. Whether you keep your stock one, or go aftermarket, our tundra direct integration plug and play harness will require NO cutting or splicing any of your factory wiring. The installation can be easily 100% reversed back to OEM equipment… Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.
Frequently asked questions
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?
Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
A HUGE thank you to Rudy for making the trip to our shop!
Vehicle
2023 Toyota Tundra
System
System 1
Posted
May 2024
Shop
Taco Tunes, San Antonio, TX
Rudy was disappointed with the factory audio in his 2023 Tundra…. So, we got him set up with our System 1 with COMPLETE sound deadener matting!
tacotunes.com System 1
Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters
Rear Door Components: TT65CS rear door components.; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters will fit in stock door location.
Amp: tacotunes.com TXD1000.5 5 channel amplifier; 75 watts to each door speaker & 350 watts (RMS) to your subwoofer
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Single 10″ subwoofer
Install photos
Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersOur Tacotunes.com Single 10″ subwoofer box fits like a glove behind your rear seat on the passenger side! Don’t give up your under-seat storage when you can keep it AND enjoy your music!Tacotunes.com TT65cs Front Door Component Speakers. Designed to work with your dash tweeter, you can see the crossover network on the floor that will be hidden under the front kick panel. A true component setup in your Tundra. Don’t settle for OEM style or low-end coaxial speakers!A closer look at the TT65cs rear door midbass driverThe crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakers.Laser Cut / CNC Bent Amp Rack. Bolts to factory mounting location. Don’t let audio shops drill holes in your new Tundra!
Laser Cut / CNC Bent Amp Rack. Bolts to factory mounting location. Don’t let audio shops drill holes in your new Tundra! Tacotunes.com TXD3204v3 4 Channel Amp, TXD10001Keep your stock head unit: Direct tundra integration… Keep your stock head unit and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Passenger front door panel removed
Frequently asked questions
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
A HUGE thank you to James for coming out to our shop!
Vehicle
2021 Toyota Tacoma JBL
System
System 1A
Posted
March 2024
Shop
Taco Tunes, San Antonio, TX
Emanual came to us unsatisfied with his 2021 JBL Tacoma. So… We set him up with our System 1, with complete sound deadener, and installed his new Alpine Halo 11!
How the Taco Tunes system installs
Our Tacoma Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results!
Our complete system is plug and play completely reversible ( ZERO cutting and splicing of stock wires) AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.
Our audio system will work with your stock stereo and most aftermarket head units.
Rear Door Components: TT65CS rear door components.; Tacotunes.com speaker mounts; ID65 Coaxial Speakers -100 watts RMS
Amp: tacotunes.com TXD10005 5 channel amplifier; 75 watts to each door speaker & 350 watts (RMS) to your subwoofer
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Single 12″ subwoofer
Install photos
Our Tacotunes.com single 12” subwoofer playing.. This subwoofer box fits like a glove behind your rear seat!Our TacoTunes Laser Cut / CNC Bent Amp Rack bolts to your factory mounting location under your passenger seat. No need to drill holes in your baby!
Mounted to our amp rack is our TXD1005 5 channel amp. This amp is used to power a SINGLE subwoofer, speakers and tweeters. Using our plug and play harness which is connected to your head unit and stock wiring, it provides your new speakers and subwoofer with the power they need to give you the best listening experience!Tacotunes.com TT65cs Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. Our TT65cs consist of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels. The laser cut crossover mount provides a secure mounting location. There is no need to settle for OEM style speakers AND do NOT recommend using mis-matched coaxial speakers.TacoTunes ID65 coaxial speaker provides crisp, clear sound to the back seat in your Tacoma. Don’t settle for low end OEM style!Our TT65CS tweeters are mounted in your dash. They also use complete plug and play wiring to connect to your stock wiring. This makes their installation capable of being reversed 100% back to OEM products. Tweeter audio frequencies are HIGHLY directional. To achieve the best listening experience possible, we recommend you place these up high where nothing can block the higher frequencies.Our tacoma direct integration system will provide astonishing sound quality and allow you to keep your stock head unit. Most of our customers do not want to change their head unit. However, if you later decide to upgrade, our amps are designed to work with just about any aftermarket option. Whether you keep your stock one, or go aftermarket, our tacoma direct integration plug and play harness will require NO cutting or splicing any of your factory wiring. The installation can be easily 100% reversed back to OEM equipment… Do NOT let audio shops hack up your Tacoma’s wiring! WE have to fix these “installs” more than we care to mention.
Frequently asked questions
Is the Taco Tunes Tacoma system plug and play?
Yes. Our Tacoma Direct Integration System uses custom harnesses built for the Tacoma, bolts to factory mounting locations and is completely reversible, with zero cutting or splicing of factory wires.
Can I install an Alpine Halo 11 with a Taco Tunes system?
Yes. Our systems work with the stock stereo and most aftermarket head units, including floating-screen units like the Alpine Halo 11.
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
A HUGE thank you to Carlos for coming out to our shop.
Vehicle
2022 Toyota Tundra CrewMax
System
System 1B
Posted
September 2023
Shop
Taco Tunes, San Antonio, TX
Carlos was very disappointed with the sound quality of the OEM system in his 2022 Crew max. So.. We got him set up with our system 1B along with full sound deadender!
The system 1B that includes the following
2022 Tundra Factory Integration System: 3 Harness Plug and Play system – no cutting or splicing any of your wires in your new Tundra.; NTUNE6 – LOC / Audio leveler & Bass Enhancement module
Front Door Component Speakers: Tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Mid bass Drivers -100 Watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Front Door Speaker Wire Harness Adapters; Tacotunes.com Dash Speaker Wire Harness Adapters; Tweeters Installed in dash location using tweeter adapters.
Rear Door Components: Tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65 Mid bass drivers Handles -100 watts RMS; TT65 Crossover; TT65 Tweeter; Tacotunes.com Tweeter Harness Adapters; Tweeters will fit in stock door location
Amps: tacotunes.com TXD3204v3 Four channel amplifier; tacotunes.com TXD10001 Mono subwoofer amplifier; 100 watts x 4 to each speaker and 800 x 1 (subwoofers); Laser Cut Amp Rack that bolts to factory mounting location. Don’t let audio shops drill holes in your floors!
Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Dual 10″ subwoofers; Image Dynamics ID10V4 (full size) 10” subwoofer 400 watts RMS x 2 (800); NOTE: Keep eye out for our under seat fiberglass subwoofer boxes! These are designed for serious bass lovers! Tons of air space and mounting depth!
Install photos
Love seeing these 2022+ Tundras!Passenger side rear door matted and ready for speaker installation!A closer look at the tt65cs rear door midbass driverTacotunes.com TT65cs rear Door Component Speakers. The mid bass drivers fit in your stock door location (no modifications, the TT65CS tweeters fit in the stock door tweeter location. The crossover network is securely mounted to the door using our laser cut crossover mount designed for your 2022+ Tundra.Rear door component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or coaxial speakersTacotunes.com TT65cs Front Door Component Speakers. Designed to work with your dash tweeter, you can see the crossover network on the floor that will be hidden under the front kick panel. A true component setup in your Tundra. Don’t settle for OEM style or low-end coaxial speakers!Our Tacotunes.com dual 10” subwoofer box fits like a glove behind your rear seat! Don’t give up your under-seat storage when you can keep it AND enjoy your music!Alfred nearly finished matting the rear wall.Our amp rack and amps are designed specifically for your 2022+ Toyota Tundra. The laser cut amp rack bolts directly to factory mounting locations, Don’t let audio shops drill holes in your new Tundra! PLUS our amp bolts to the amp rack for a stock appearance and a secure mounting solution. PLUS with our Tundra direct Integration system, there is NO cutting or splicing any of your factory wiring!Direct tundra integration… Keep your stock head unit and get astonishing sound quality! Our plug and play harness system connects to factory wiring. This means NO cutting or splicing wiring in your Tundra. EVERY wiring connection we make to your factory wiring utilizes a plug and play harness. Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.
Frequently asked questions
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
Do I have to cut factory wires to upgrade audio in a 2022+ Tundra?
No. Our 2022+ Tundra integration systems use plug-and-play harnesses that connect to factory plugs, so nothing is cut or spliced and the upgrade is fully reversible.
Can I install a Taco Tunes system myself?
Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.
A huge thank you to Ramon, Owner of Olguin Handyman Services, for making the trip to our shop from Allen, Texas!
Vehicle
Toyota Tundra
System
System 1B
Customer from
Allen, Texas
Posted
July 2023
Shop
Taco Tunes, San Antonio, TX
Ramon was disappointed with the OEM speaker quality. So… we got him set up with our system 1B, with complete sound deadener installed, and he could not stop smiling!
How the Taco Tunes system installs
Our Tundra Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results! In 2020 Tundra’s come equipped from the Factory Apple Car Play / Android Auto.
TacoTunes’ complete system is plug and play, completely reversible AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.
Our audio system will work with your stock stereo and most aftermarket head units.
tacotunes.com System 1B
Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters; tacotunes.com sail panels with tacotunes tweeters
Rear Door Components: TT65CS rear door components.; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass drivers Handles -100 watts RMS; TT65CS Crossover; TT65CS Tweeters; Tweeters will fit in stock door location.
Amp: tacotunes.com TXD3204v2 Four channel amplifier; Tacotunes.com TXD1001 Subwoofer amp; 100 watts x 4 to each speaker and 1000 x 1 (subwoofers)
Our Tacotunes.com dual 12” subwoofer box fits like a glove behind your rear seat! No need to settle for shallow sounding shallow mount subwoofers!A closer look at the TT65cs rear door midbass driverThe crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door in the rear door. Don’t settle for low end OEM style!
New tweeter installed in stock door location.Component speaker system. The crossover network is mounted using our laser cut amp crossover mount. The crossover network is responsible for directing the proper frequency to the new tweeter in the door panel and the mid bass driver in the door. Don’t settle for low end OEM style or low-end coaxial speakersTT65cs Front Door True Component Speakers are comprised of matched mid bass driver, tweeter & crossover network. The TT65cs consist of complete plug and play wiring, which prevents any cutting and splicing of your factory wires, making their installation 100% reversible. The crossover network delivers the proper frequencies to your mid bass driver(s) & tweeter(s) ensuring crystal clear audio at ALL listening levels. The laser cut crossover mount provides a secure mounting location. There is no need to settle for OEM style speakers AND do NOT recommend using mis-matched coaxial speakers.A closer look at the TT65cs front door midbass driverOur Tundra direct integration system will provide astonishing sound quality and allow you to keep your stock head unit. Most of our customers do not want to change their head unit. However, if you later decide to upgrade, our amps are designed to work with just about any aftermarket option. Whether you keep your stock one, or go aftermarket, our tundra direct integration plug and play harness will require NO cutting or splicing any of your factory wiring. The installation can be easily 100% reversed back to OEM equipment… Do NOT let audio shops hack up your Tundra’s wiring! WE have to fix these “installs” more than we care to mention.Our System 1B includes a dual 12” subwoofer in a ported enclosure. Here the subwoofer box is ready to be installed in the Tundra.Rear wall matted and ready for the sub box!
Frequently asked questions
Is sound deadener worth adding to a Tundra?
Sound deadener matting reduces rattles and road noise, so your speakers sound cleaner and your bass hits tighter. It is one of the best add-ons to any speaker upgrade.
Do customers really drive hours for a Taco Tunes install?
Yes. Customers regularly drive from Houston, Dallas, Austin, Amarillo, El Paso and out of state, because our systems are built specifically for Toyotas and installed without cutting factory wiring.
Is the Taco Tunes System 1B plug and play on a 2007-2021 Tundra?
Yes. The system uses custom wiring harnesses built for the Tundra, bolts to factory mounting locations and is completely reversible, with no cutting or splicing of factory wires.