System 1A Complete Audio System Designed for 2007-2019 Toyota Tundra Crewmax

(8 customer reviews)


Tundra Year

Insufficient stock


System 1A Complete Audio System Designed for 2007-2019 Toyota Tundra Crewmax

Our entry level 2 audio system designed for your Toyota Tundra contains all components necessary for a successful installation. This setup will work with stock or aftermarket head units. This is for NON JBL equipped Tundras only. If you have JBL or interested in larger scale audio system, click here.

The following components are included in this audio system upgrade:

Dual EZAMP Bundle 4 Channel & Subwwoofer Amplifiers (Includes Tundra Direct Connect System)

EZAMP Bundle Specs:

TXD3240v3 Front & Rear Speaker Output Amp Specs

100 watts x 4 (Front/Rear Door Speakers) RMS (4 Ohm)

150 watts x 4 (Front / Rear Door Speakers) RMS (2 Ohm) NOT recommended without sound processor.

TXD6001 Subwoofer Output Amp Specs

400 watts x 1 Subwoofer Output (2 Ohm)

The following items are included with EZAMP nstall Kit

1 – TXD6001- Subwoofer Control Knob

1- Direct Connect Tundra Plug N Play Integration System

NOTE: This setup is designed to work with your stock stereo. However, it will work with aftermarket head units as well.

1 – TXD Tundra direct replacement amp rack – bolts directly to stock mounting location. No cutting or drilling.

TXDAMPKIT-01 Dual Amp Power Kit

Amp Power Install Kit Includes (more info)

1 – MANL Fuse Holder

1 – 4 gauge to 8 gauge distribution block

1 – 2.5ft 4 gauge OFC – battery connection with terminal ring attached (red)

1 – 13ft  4 gauge OFC – amplifier power wire (red)

2 – 10in 8 gauge OFC – amp power wire (red)

2 – 24in 8 gauge OFC – amplifier ground wire with ring terminals attached (black)

1 – 100 AMP (BLUE) MANL Fuse (battery)

1 – 60 AMP (YELLOW) MANL Fuse (TXD10001 Amp)

1 – 40 AMP (ORANGE) MANL Fuse (TXD6001 Amp)

1 – 30 AMP (RED) MANL Fuse (TXD3204v2 Amp)

1 – 10mm grounding bolt

1 – 5/16″ self tapping grounding bolt

1 – 6ft 1/2″ split loom

1 – 3ft 1/4″ split loom

2 – #8 x 5/8 Black Screw

20 – Cable Ties


Tundra Full Size 12″ Ported Subwoofer Enclosure & Subwoofer

Tundra 12 inch Subwoofer Specs

1 – ported subwoofer enclosure

1 – ID12D4 dual voice coil subwoofer (2 Ohms presented to amp for max power)

1 – Terminal Cup

1 – 20 foot 12G subwoofer wire

NOTE: Color & Finish may vary on the subwoofer box.


Front Door Speakers (Driver & Passenger):

Component Speakers Install Kit Includes

2 -Image Dynamics ID65CS 6.75″ Component Speakers, Tweeters & Crossovers

2 – Front Door Speaker Mounts

2 – Crossover Mounting Adapters & mounting screws (2)

2 – tacotunes Sail Panels pre-sized for your new tweeters.

2 – 36″ Wire Harness Adapters (connects to stock wiring)

2 – 36″ 16G speaker wire – Red / Black (mid range)

2 – 36″ 18G tweeter wire – Red / Black (tweeter)

Rated at 100 watts (RMS)

NOTE: These are branded speakers.


Rear Door Speakers (Driver & Passenger):

Speakers (more info)

Choose from Component Speakers or Coaxial. 2014+ Tundras are equipped with rear door factory tweeters. 2007-2013 NON JBL equipped Tundras do not have rear door tweeters.

2 – Image Dynamics ID65CS 6.75″  Component Speakers, Tweeters & Crossovers


2 – Image Dynamics ID65 6.75″ Coaxial Speakers

2 – Rear Door Speaker Mounts

2 – Crossover Mounting Adapters & mounting screws (2)

2 – 36″ Wire Harness Adapters (connects to stock wiring)

2 – 36″ 16G speaker wire – Red / Black (mid range)

2 – 36″ 18G tweeter wire – Red / Black (tweeter)

Rated at 100 watts (RMS)



Additional information

Weight 69 lbs
Dimensions 55 × 22 × 13 in

Tundra Year


2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018

Share your thoughts!

4.88 out of 5 stars

8 reviews

Let us know what you think...

One review with a 4-star rating

  1. Sounds awesome! All installation gear is included to get your system installed!


    I absolutely love the system. Received my order within 1 week and everything was included…except instructions. That was the only drawback. There should be a video, or a print out of step by step instructions because it is ALOT of stuff and also there are different things that can be done different ways. A simple print out of where to run the power wire, where to ground amps, and where to install crossovers would have been helpful! Also, one of the harnesses was not labeled. Luckily, I was in good hands because I had one of the technicians who was happy to answer all my questions while I did the install. That could have been avoided with a simple step by step guide. All in all, and awesome and very high end system. I have installed 3 systems before this one in different vehicles, but because this is a direct OEM, plug and play system, there are a couple of differences. I absolutely would recommend this system for anybody who wants an upgrade. It is very much worth the money spent!

    Upvote if this was helpful (0) Downvote if this was not helpful (0) Flag for removal

    Something wrong with this post? Thanks for letting us know. If you can point us in the right direction...




Continue as a Guest

Don't have an account? Sign Up