Posted on

2022 Toyota Tacoma System 1 Audio Upgrade

Michael could not stop smiling after hearing his system! - 2022 Tacoma audio upgrade

A HUGE thank you to Michael for coming out to our shop!

Vehicle2022 Toyota Tacoma
SystemSystem 1
PostedOctober 2023
ShopTaco Tunes, San Antonio, TX

Michael came to us unsatisfied with his 2022 Tacoma’s OEM system. So… We got him set up with our System 1!

How the Taco Tunes system installs

Our Tacoma Direct Integration System allows you to easily add amps to your stock head unit (stereo) and obtain astonishing results!

Our complete system is plug and play completely reversible ( ZERO cutting and splicing of stock wires) AND bolts to factory mounting locations. EVEN the wiring harnesses are custom designed for this vehicle.

Our audio system will work with your stock stereo and most aftermarket head units.

tacotunes.com System 1A

  • Front Door Component Speakers: tacotunes.com TT65CS Component Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; TT65CS Mid bass Drivers -100 Watts RMS; TT65CS Crossovers; TT65CS Tweeters
  • Rear Door Components: CTX65 Coaxial Speakers; Tacotunes.com heavy duty speaker mounts cut to 5.6”; CTX65 Coaxial speakers Handle -100 watts RMS
  • Amp: tacotunes.com TXD10005 5 channel amplifier; 100 watts to each door speaker & 500 watts (RMS) to your subwoofer
  • Subwoofer(s): Subwoofer Box & Subwoofers; Tacotunes.com Single 12″ subwoofer

Install photos

Frequently asked questions

Is the Taco Tunes Tacoma system plug and play?

Yes. Our Tacoma Direct Integration System uses custom harnesses built for the Tacoma, bolts to factory mounting locations and is completely reversible, with zero cutting or splicing of factory wires.

Will a Taco Tunes system work with an aftermarket head unit?

Yes. Our systems work with the stock stereo and most aftermarket head units, so you can upgrade the screen now or later.

Can I install a Taco Tunes system myself?

Yes. Our systems are designed for DIY installs, using factory mounting points and plug-and-play harnesses. If you would rather have it installed, contact us and we will help you find an installer.

Posted on

2021 Toyota Tacoma Double Cab Rear Door Component Speaker Install

Today we installed component speakers in the rear doors of a 2021 Toyota Tacoma Double Cab TRD 4×4 Offroad.

Toyota Tacoma Rear Door Component Speakers
Toyota Tacoma Rear Door Component Speakers

Toyota Tacoma

Color: Cement

Model: TRD Off Road 4×4

Stock Audio System: Non JBL

Components Installed:

tacotunes.com TXD3204V3 4 Channel Amp (100 x 4) Watts RMS

tacotunes.com TXD10001

tacotunes.com nTune6 Toyota Audio Correction (2020 Android/Carplay enabled Toyota Head Units)

Front Door Speakers: tacotunes.com TT65CS

Rear Door Speakers: tacotunes.com TT65CS

Most of customers prefer to install our coaxial speakers in the rear doors. However we come across customers that want to provide great sound to their rear seat passengers.

Step 1: Remove door panel. Customers have reported that using a 1 17/8″ hole saw works great. We used a 1 13/16″ and used a razor to enlarge hole a little to ensure a very tight fit.

NOTE: We selected the “flattest” spot on the upper door panel. And double check on the rear of the door panel, that you will not encounter any potential issues.

Toyota Tacoma Double Cab Rear Door Component Speakers
Toyota Tacoma Double Cab Rear Door Component Speakers

Step 2: Using a Razor clean up the edges.

Toyota Tacoma Double Cab Rear Door Component Speakers
Toyota Tacoma Double Cab Rear Door Component Speakers

Step 3: Install the midbass driver and crossover mounts as shown. Using our Plug and Play wiring harness system. Connect to your crossover as shown here.

Toyota Tacoma Double Cab Rear Door Component Speakers

Step 4:Install the tweeter in the door panel / place door panel back on the door.

Toyota Tacoma Double Cab Rear Door Component Speakers
Posted on

For Sale! 2016 Toyota Tacoma Double Cab 4×4 TRD Sport for Sale – SEMA / Marketing Truck

2016 Toyota Tacoma Double Cab TRD Sport 4×4 $45,000.00

Miles: Less than 16,000

Original Color: White (Wrapped) Logos & Wrap Removable

This truck was built by Josh here @ tacotunes.com. The truck was used strictly for sales & marketing.  Primarily for the audio products we have developed for Toyota Tacomas, PLUS a number of product partners we have worked with over the last 10 – 15 years . . .  it has never been “offroaded” and made an appearance at 2019 SEMA – TIS Wheels Booth.

EXTERIOR MOD LIST:

Fab Fours roof rack 3 Rigid industries 50” radiance LED Bars (white) 2 sets of rigid industries pods.

Avery Dennison Quick Silver wrap (Original truck color is white)

DBCustomz grille Retrofitted

OEMASSIVE headlights (rigid industries pods for brights)

Front and Rear road armor bumpers with rigid industries led lights

Amp Research power steps

3 sets of 544 Nightmare Train horns by hornblasters custom mounted under the bed

Bulletproof suspension 12” stage 4 lift kit (powder coated lollipop red diamond)

Powder coated rear axle (gloss black with red metallic)

3” body lift by performance accessories

26×12 -44 offset TIS 547BM wheels 

40×15.50R26 Fury off-road country hunter M/T tires

4:88 Yukon gears

16 pc rocklight Kit

INTERIOR MOD LIST:

Tacotunes.com stereo system. Dual 12” Subwoofers in ported Enclosure, 1500 WATTS RMS to Subs & 150 watts to IDCXS64 Component Speakers front doors. Exile Audio 1500 Watt RMS marine grade subwoofer amp & Exile Audio 150×4 marine grade 4 channel amp.

Roadwire leather (black and red double diamond stitched)

Sprint booster throttle response module

Truck Suspension Build performed @maximum altitidue here in San Antonio TX

We are building a new “marketing” truck so we are NOT interested in trades or parting out. If we don’t get what we are asking, we will part out and sell the mods. We are aware we can get MORE money if we part out and return the truck to stock . . but would rather save the time.

Next to Toyota Tundra with 8″ Lift & 37″ Tires
Posted on

Kicker 41KSS654

Kicker 41KSS654 Toyota Tacoma
Kicker 41KSS654 Toyota Tacoma

Toyota Tacoma Kicker 41KSS654

Summary:

Speaker size: 6.5″

Mid range driver mounting diameter (cutout diameter): 4.9″

Tweeter diameter (cutout): 1.753″

Top mount depth: 1.8125″

Impedance: 4 Ohm

RMS: 125

CLICK HERE TO SEE AUDIO PRODUCTS DESIGNED FOR YOUR TOYOTA TACOMA

 

 

Additional Info:

Features and Specs
General
Speaker Size 6 1/2″
Design 2-way
Tweeter Design 1″ Dome
Tweeter Composition Silk
Woofer Composition Polypropylene
Woofer Surround Rubber
Parts Warranty 1 Years
Labor Warranty 1 Years
Specifications:
Sensitivity (1W at 1 meter) 90
Sensitivity at 2.83 volts N/A
Frequency response 35 – 21k Hz
Minimum RMS Wattage 2
Maximum RMS Wattage 125
Peak Power Handling (Watts) 250
Impedance 4 Ohms
Top-mount Depth (Inches) 1 13/16
Bottom-mount Depth (Inches) 2 3/16
Cutout Diameter or Length (inches) 4 7/8

Kicker-41KSS654-Component-Speakers-Toyota-Tacoma.pdf

Posted on

2011 Toyota Tacoma TRD Sport 4×4 For Sale 9 inch Lifted Leather Sunroof Audio System Bumper

2011 Toyota Tacoma Double Cab TRD Sport for sale

2011 Toyota Tacoma TRD Sport 4×4 For Sale 9 inch Lifted Leather Sunroof Audio System Bumper

Up for sale our 2011 Toyota Tacoma TRD Sport. We have used this truck to demonstrate our audio products. Below is a detailed list of all the options installed on this truck.

While you are here. Check out our audio products for your Toyota Tacoma; Click Here:

LOTS MORE PICS COMING! KEEP CHECKING BACK!

Truck  / Dealer Options:

2011 Toyota Tacoma TRD Sport 4×4

Color: White

Mileage: 73,000

Engine / Trans: 4.0 V6/ Automatic

Power Windows, Locks, Tinted Windows,

 

 

2011 Toyota Tacoma Double Cab for Sale
2011 Toyota Tacoma Double Cab for Sale

Interior adds:

WeatherTech Floor Mats: $200

Window Tint: $150

Lift / Wheels / Tires:  $5,425 (not including install)

BDS 6″ lift with Fox Coilover Suspension $3,600

3″ Body Lift $200

20″ Fuel Maverick $1,200

Tires: $1,000

NFab Steps: $325

Bumper: $1,600 (not including install)

Fab Fours Pre-runner $1,600

Sunroof: $1,200

Webasto

Leather: $1,000

Katzkin 2 Tone Leather with seat heaters $1,000

Stereo System by tacotunes.com: $2,500 (not including install)

Pioneer GPS /

Exile Audio Javelin Amp 100 watts to each speaker / 800 watts to subwoofer

tacotunes.com Ported Subwoofer box

Image Dynamics IDQ12″ 750 watts RMS IDQ12

Front Speakers; Image Dynamics XS 65 Component Speakers  with tacotunes.com

Rear Speakers: Image Dynamics CTX65CS Component Speakers with tacotunes.com

OFC power wiring

TSPEC / Tsunami: Speaker Wiring

Misc Exterior:

Aftermarket head lights, Tool Box,

$24,500 Private Party Value

$15,000 Aftermarket Parts & Install

$27,995

Questions / Answers: (Below is a list of common questions we get when we sell one of our in house rides. In addition, we will post questions that other potential buyers may ask.

Question: Why are you selling?

Answer: We provide audio upgrade solutions for Toyota owners. So we build Trucks / cars during our test fit and product development. This is our 3rd 2005 – 2015 truck we test fit equipment into. We no longer need this truck. We are now working on producing and creating more audio products for  2016+ Toyota  Tacomas.

Question: Are you negotiable.

Answer: We are firm on the price. We could possibly remove a few items to reduce the price.  This is a really nice truck. Gets lots of thumbs up when driving down the road. All aftermarket parts were installed by seasoned professionals. When buying a used truck with a lot of mods, be sure the work was performed properly.

The car selling ugly:

Not interested in trades.

For you jokers:

I am NOT a bank and will not accept payments. I am in NO rush to sell please do not send long winded emails with reasons to sell for less. The process is really simple. You either have the money and you want to buy it or you don’t. I have a clear blue title that will be handed over when the payment has CLEARED the bank. I am in San Antonio and the truck is available for viewing just about anytime.  If you are under 25 years old, you will need to bring proof that you have the cash or financing setup  before you can test drive.

For you dealers:

I am not looking for help to sell this vehicle. Please do not contact us with offers to sell the vehicle.

For you scammers:

Just go away . . .

Not trying to be a jerk or difficult . . but every time we sell one of our demo vehicles we always get jokers, dealers and scammers trying to waste my time . .

Posted on

How to install component speakers 2016+ Toyota Tacoma

Toyota Tacoma Image Dynamics CTX65CS Component Speakers

How to install component speakers 2016+ Toyota Tacoma

If you are planning to install new after-market component speakers in your 2016+ Toyota Tacoma, we provide step by step instructions on using your stock wiring without any cutting or splicing.

In the 2016+ Toyota Tacoma, Toyota wired the front door speakers and the front dash speakers (tweeters) in parallel. In short, the stock tweeters and door speakers are wired together. When you disconnect the stock tweeter, the door speaker loses signal.

To overcome this challenge, we offer this custom harness for your Toyota Tacoma.

 

Toyota Tacoma Tweeter Wire Harness Adapter Interface
Toyota Tacoma Tweeter Wire Harness Adapter Interface

In the picture above you will see wires coming out of the tweeter wire harness adapter. Pin 2 (positive) & Pin 4 (negative) are the signal wires coming from your stock stereo (head unit). Pin 1 (positive) & Pin 3 (negative) are signal wires running to your door speakers.

In the youtube video below, we will show you show you how to install component speakers using our tweeter wire harness adapter.

The signal coming from the head unit (PINS 2/4) will be connected to the IN+ / IN- on the passive crossover. The signal going to your door speakers (PINS 1/3) will be connected to the W+ / W- on your crossover T+ and T- need to be plugged into your new aftermarket tweeter.

NOTE: You MUST use the passive crossover that is included with your component speaker set. If you apply power to your tweeters without the crossover in place, the lower mid bass frequencies will damage the tweeters. Please note some standalone tweeters do not require a separate crossover as they are equipped with a type of on board passive crossover. We HIGHLY recommend purchasing a matched component set to avoid potential issues.

The second challenge in removing your stock dash speaker / tweeter is the shape of the stock tweeter. You will need a tweeter adapter similar to this one:

Toyota Tacoma Stock Dash Speaker Tweeter
Toyota Tacoma Stock Dash Speaker Tweeter

When you remove your stock speaker from the front door in your Toyota Tacoma you will need a speaker mounting adapter and speaker wire harness adapter.

Picture of stock Front door Speakers:

Toyota Tacoma Stock Front Door Speakers
Toyota Tacoma Stock Front Door Speakers

You have the option to cut your stock wiring and splice an extension. However, most of our customers want to return the vehicle to stock in the event of sale or trade in.

Toyota Tacoma Door Speaker Wire Harness Adapter Interface
Toyota Tacoma Door Speaker Wire Harness Adapter Interface

In the YouTube video we you will get step by step instructions on installing a component set of speakers along with detailed wiring instructions for your passive crossovers.

 

 

Parts Needed:

  1. Speakers adapters / mounts
  2. Speaker wire harness adapters & speaker terminals
  3. Tweeter adapters / mounts
  4. Tweeter wire harness adapters
  5. 18g tweeter wiring
  6. 2 butt splice connectors
  7. Longer bolt kit if using our heavy duty adapter kit. HIGHLY recommended for larger more powerful speakers.
Posted on

2016 Toyota Tacoma Double Cab Subwoofer Box Enclosure

Toyota Tundra Subwoofer Box Enclosure Kelsie

2016 Toyota Tacoma Double Cab Subwoofer Box Enclosure

This subwoofer box is designed to hide behind the rear, driver side seat in your 2016 Toyota Double Cab Tacoma. This will work in the 2016 and Toyota Tacoma.  The box is made from ULTRA high quality MDF for best sound quality and hand built right here in the United States! Don’t settle for cheap particle board boxes that you find on online auctions and many other discount sites. You will not get the sound quality you are after. We offer this subwoofer box in a variety of configurations. Check out our shopping cart for a complete list of options and bundle packages we offer for your 2016 Toyota Tacoma Subwoofer and stereo upgrade needs.

2016 Toyota Tacoma Double Cab Subwoofer Box Enclosure

We offer the box plain as seen in the pictures OR covered in spray in bed liner material.

Once the box is hand built here in the United States, we spray the MDF with a high quality polyurethane bed liner. Keep in mind the Tacoma has very little room behind the seat. You will need to remove your seat for installation. However after the installation you can put the seat back in place. Due to lack of space behind the seat, you can NOT fold the seat down as it may damage the subwoofer.

To make the installation quicker and easier, we offer a number of optional installation items that are generally not included with sub woofer boxes.

 

 

Subwoofer Mounting Hardware  / Wiring & Terminal Cup Kit:

1 – Terminal / Wiring Cup

1 – 24″ Red 12 gauge wire

1 – 24″ Black 12 gauge wire

8 – Wood Screws (subwoofer hardware)

4 – Wood Screws (terminal cup hardware)

Subwoofer Box Mounting Hardware:

3 – 10 MM Metric Mounting Bolts

3 – Large Rubber Washers

3 – Large flat washers

Other:

1 – 20″ x 20″ sheet polyfil

Naked Box or Sprayed with heavy duty bedliner. (We are not authorized to use the name online. NOTE: WE are authorized to spray in Texas)

Installation Notes:

Please see the installation video for details on installing this subwoofer in your

Toyota Tacoma Double Cab.

Remove the upper rear seat section (driver side)

Remove plastic backing on rear of upper seat seat section.

Remove the storage compartment on rear wall (driver side only)

Connect subwoofer wiring to terminal cup and install the subwoofer box.

Bolt down the box. Be certain to use the rubber sealing washers.

Install your subwoofer.

Install your seat upper.

Save all your parts so you can return the truck back to stock in the even you sale or trade your double cab Tacoma.

2016 and up Double Cab Tacoma, you will need to roll up the matting on rear wall and tuck behind storage compartment.

You will NOT be able to fold the seat down after you install the subwoofer. The passenger side will still operate as designed.

We highly suggest the use of a matting material.

 

 

Posted on

What size speakers fit my Toyota Tacoma Double Cab

What size speakers fit my Toyota Tacoma Double Cab?

Toyota Tacoma Front Doors:

[TACOYRDC_2]

The front doors in your Toyota Tacoma Double Cab are equipped with speakers that resemble a 6×9″ aftermarket speaker. However, when you remove the stock speaker, you will need to use an adapter that allows you to install aftermarket speakers. When you use one of our speaker adapters, you can install 6×9, 6.5 or 6.75 inch coaxial and component speakers. We also offer tweeter mounting products to install aftermarket tweeters in your Toyota Tacoma Double Cab. Be sure to watch our video(s) on how to select speakers that will fit into your Tacoma Double Cab. If you don’t want to worry about what fits, be sure to check our our bundled speaker packages that are assured to fit your Toyota Tacoma Double Cab.

Our speaker mounting adapters for the front doors in your Toyota Tacoma Double Cab are 1″ thick and they provide a top mount depth of 3.25″. If you are installing 6×9 speakers this will work with just about every 6×9 speaker that has a top mount depth of 3.25 inches or less. If you are planning to install 6.5 inch coaxial speakers the standard mounting diameter of 5.1 inches will accommodate approximately 90% of all 6.5 inch speakers. Higher end 6.5″ & 6.75 speakers and /or component speakers will usually have a larger mounting diameter. For more in depth explanation of speaker sizes please watch the video(s) below. It should answer most of your questions regarding speaker sizes and mounting depth.

Toyota Tacoma Rear Doors:

[TACOYRDC_2]

The rear doors in your Toyota Tacoma Double Cab are equipped with speakers that resemble a 6.5″ aftermarket speaker.. However, when you remove the stock speaker, you will need to use an adapter that allows you to install aftermarket speakers. When you use one of our speaker adapters, you can install 6.5 or 6.75 inch speakers in the rear doors.Be sure to watch our video(s) on how to select speakers that will fit into your Toyota Tacoma Double Cab . If you don’t want to worry about what fits, be sure to check our our bundled speaker packages that are assured to fit your Toyota Tacoma Double Cab.

Our speaker mounting adapters for the rear doors in your Toyota Tacoma Double Cab are 3/4″ thick and they provide a top mount depth of 3.35″. If you are planning to install 6.5 inch speakers the standard mounting diameter of 5.1 inches will accommodate approximately 90% of all 6.5 inch speakers. Higher end 6.5″ & 6.75 speakers and /or component speakers will usually have a larger mounting diameter. For more in depth explanation of speaker sizes, please watch the video(s) below. It should answer most of your questions regarding speaker sizes and mounting depth.

CLICK HERE TO SHOP FOR TOYOTA AUDIO PRODUCTS

 

Below is a video instructional video that will show you how to remove the door panel and installs speakers in a Toyota Tacoma Toyota Tacoma Double Cab Access cab & Xrunner.

What size speakers fit my Toyota Tacoma Double Cab
Tina showing 6×9 speakers installed in Toyota Tacoma Double Cab Access Cab & Xrunner

What size speakers fit my Toyota Tacoma Double Cab
Click here for step by step instructions on removing the door panel and installing speakers.

Step by step pictures of speaker installation in toyota tacoma
After you have “popped” out the bottom portion of the door panel you will “lift” the panel upwards to remove it from the door.

 

Alphasonik Coustic Jensen Neon Lights RCA
Alpine Crimestopper JL Audio Nitro RE Audio
Alumapro Crossfire JVC Optima Rockford Fosgate
American International Custom Boxes Kenwood Orion Sansui
ARC Audio DEI Kenwood Excelon OZ Audio Scosche
Audiobahn DHD Kicker PAC Scytek Alarms
AudioControl Diamond Audio Kinetik Package Solobaric Boxes
Audiosource DLS Kole Audio Panasonic Sony
Audiovox Dual Lanzar Performance Teknique Soundstream
Audison DUB Mag Audio Legacy Phoenix Digital Stinger
Avionixx Dynamat Lightning Audio Phoenix Gold Tidus
Bazooka Dynaudio MA Audio Pioneer Tsunami
BMA Earthquake MB Quart Polk Audio U.S. Acoustics
Boss Eclipse McIntosh Power Acoustik US Amps
Boston Acoustics Farenheit Memphis Power Supplies Valor
Brax Focal Mmats Powerbass Viper
Cadence Helix Monster Cable Precision Power Visonik
CDT Audio Hifonics Morel Prestige Volfenhag
Cerwin Vega Image Dynamics MTX Profile XO Vision
Clarion Infinity MTX Thunderforms Pyle Xpress
Cobra JBL Nakamichi Rainbow Zapco

 

What size speakers fit my Toyota Tacoma Double Cab

 

Posted on

2003 Toyota Tacoma Double Cab Tacotunes Build Audio Stereo LED Winch Installation PICS

2003 Toyota Tacoma Double Cab Tacotunes Build Audio Stereo LED Winch Installation PIC

This is an in house 2003 Toyota Tacoma Double Cab, belongs to a past customer / now part time employee.

Here at tacotunes.com we perform a number of audio installations right here in San Antonio TX. In the past we have only provided installation products for 2005 and up Toyota Tacoma, 2007 and up Toyota Tundra and quite a few other model Toyota.However, we began to offer some products for the 2001, 2002, 2003, 2004 Toyota Tacomas.

This build page was put together to give some ideas and assistance in upgrading or modifying your Gen 1 Toyota Tacoma. The build pages will be broken down by each build section.

Page 2 – Audio System Upgrade

Page 3 – Wheels / Tires

Page 4 – Suspension Lift

Page 5 – Leather Seats

Page 6 – Carpet Installation

Page 7 – Winch & Wiring Installation

Before Pictures:

2003 Toyota Tacoma Double Cab 4×4 The gallery below contains a number of pictures of the 2003 Tacoma Double at the beginning of the build. As you can see it had already been modified pretty heavily when we decided to upgrade it even further.

After Pictures:

 

Posted on

How to set gain on Exile Javelin 5 Channel Class D Amplifier

How to set gain on Exile Javelin 5 Channel Class D Amplifier

This post is part of a video series on youtube. Be sure to watch the video(s) and read all information below, BEFORE you ask questions or make comments. This is a DIY site. We make every attempt to provide the information you will need to perform your own installation.  Questions / comments that are clearly answered in the videos/posts will be deleted. If we missed something that you think will be helpful or will make it easier to understand please feel free to comment below.

Per the video, the calculator below will help you to find the correct voltage for setting the gain on your EXILE JAVELIN amplifier. This video will work or most amps, however to assist our customer base we try to provide as much specific information as possible.

Ok, so if you are ready to set the gain on your amp. You have already completed the following videos / steps:

1. How to select a head unit.

2. How to add an amplifier to my stock head unit.

3. How to install power and speaker wiring in your Toyota Tacoma.

4. How to select speakers that fit my Toyota Tacoma.

5. How to select amplifier for my Toyota Tacoma.

6. How to wire a subwoofer.

7. How to get the actual “load” from your speakers / subs.

Tools / items needed to set the gain:

1. Digital Multi-Meter –

2. Audio Test Tones – Available on this page

3. Small Screwdriver to adjust gain knob.

4. Voltage Calculator (see below)

5. The performance (birth) sheet for your amp.

Per the video, the best way to set the gain on your amplifier is by using an oscilloscope. However, an inexpensive digital multimeter (DMM) is a great alternative. The voltage calculator below will help you to set your gain.

Most amplifiers will include a “birth sheet”. The birth sheet includes actual output numbers when the amp was tested at the factory. Most quality amplifier companies will provide the RMS output.  The current model of the Javelin Exile Amp is rated at

PIC of Birth-sheet

Specs:

85 watts x 4 to each speaker

500 watts x 1

Setting the gain on the speaker channel.

The amp is rated at 80 watts. Using the calculator below, enter the voltage of your Toyota.  You can use the DMM to get the actual voltage.If you purchased our amp kit, we include an on-board voltmeter.

Head unit:

We need to figure out the maximum volume for our head unit. In about 85% of the cases we found most head units will start to “clip” the signal at around 80% of the volume. When the signal begins to clip, it will send distortion to the speakers / subs. Once we know the maximum volume setting, keep in mind this will be the maximum volume you should turn your stereo. NOTE: Some music is recorded at different levels and the quality of music will play a role in the volume. In some cases the the max volume will fluctuate a little bit.

Turn on the car and note the voltage.

Connect the DMM to channel 1 on amplifier.

FAQ:

What is gain?

The amplifier gain  is used to match the output of the head unit to the amplifier. The maximum audio output voltage from different head units will vary by brand / models. Without a gain control, most head units may not be able drive the amplifier to full power. 

Subscribe – Please be sure to subscribe to our youtube channel. youtube.com/tacotunes

Contribute – If you are a customer of ours great! Thank you! If you are using our videos and information to setup and install your system . . . Please help us out with a monetary contribution. The videos take time and money to produce. Hosting services and web design cost money. Most shops charge about $200 to install and tune an amp. If we helped you out, send $10 to [email protected] and we will keep more videos coming. Chances are you will use our help again in the future. 🙂

Subscribe – Please subscribe to us on youtube!

Share – Please share this page with friends via Facebook, forums and other forms of online media.

Help – Please take time to like us on Facebook and like our product partners on Facebook. Please tell them we sent you!

Most videos providing instructions that use a DMM for amp tuning are only providing a small part of the information required to properly set your gains using a DMM.  To accurately set your gain(s) you must consider some of the factors that affect the correctl DMM voltage you need to have.

Per the video, the additional calculations below might be considered “splitting hairs” but we like to arm our customers with as much knowledge as possible. With that said; keep in mind:

1. Most amps are bench tested using 14.4 volts. However, most cars do not produce that much voltage.

2. Most people are assuming the speaker(s) / sub(s) are actually providing the “stated” load.  For example, most people assume that their speakers are 4 ohm load.

These two factors will affect your final output. Below we will show you how to get more accurate numbers to apply to your amp.

 

Posted on

How to keep your stock factory Entune stereo and add an amplifier sound processor equalizer

How to keep your stock factory Entune stereo and add an amplifier sound processor equalizer

How to keep your stock factory Entune stereo and add an amplifier sound processor equalizer – Love your Toyota Tacoma, but not really enjoying the sound quality coming from the factory Entune stereo?  Until recently, many audio enthusiasts (including myself) looking for great sound quality would generally recommend replacing the factory Entune stereo (head unit) with a QUALITY aftermarket head unit. Why? Because most qualityaftermarket head units are setup for great sound – they are NOT detuned like factory head units. It used to be VERY difficult to get great sound quality from a factory Entune stereo.   Sure you can make it “loud” but loud does not mean great sound quality. However, recent technological advances in factory head units have made complete stereo replacement less practical.These days Toyota is including a ton of great features in their factory Entune stereos. At the time of this post, many of the stock head units have Bluetooth, Internet search capability, navigation (GPS), steering wheel controls, IPod and auxiliary inputs, HD radio, satellite radio and the list just goes on and on. So it really does not make sense to replace the stock head unit when it includes all these great features. Plus a car stereo that looks factory, or “stealth,” is more likely to deter thieves.  After a large number of requests from Toyota Tacoma owners we decided to produce a product that makes it easy to keep your factory Entune stereo while paving the road to AMAZING sound quality.

YES WORKS WITH NON ENTUNE UNITS ALSO!

Tacotunes is excited to introduce the ReCurve EZQ. The ReCurve EZQ has been in development for nearly 3 years. We have been testing it in a number of Toyotas here in San Antonio. From base model Toyota Tacoma to Limited or Platinum, this little “magic box” will help you get the sound you are craving from your stock Entune stereo. PLUS, installation is a SNAP! NO wire cutting, splicing, or soldering. Simply plug it in and you are ready to add one or more amplifiers to your Toyota. Gone are the days of wondering, “Will this unit work with my version of Windows or support an Apple? What did I do with the configuration CD? Why can’t I use my steering wheel controls anymore?”  No more wasting countless hours reviewing wiring diagrams followed by ruining the factory wiring harness.

To make it even easier, we will provide a template to help you tune the EZQ for you Toyota Tacoma Entune system when you provide the year and body style. PLUS, if you purchase one of our turn-key sound quality packages , this unit will be setup for plug and play from front to back. Of course everyone has different listening taste, so not only did make easy to install, the Tacotunes ReCurve EZQ is also EXTREMELY easy to adjust.

Our goal was simple.  Make it quick and easy to restore amazing sound to your “detuned” factory head unit. Whether you like more or less bass, brighter highs or even want to adjust the mid bass to your desire, it could not be easier than using the ReCurve EZQ.

So what exactly does the ReCurve EZQ do for my audio system? The short version: the ReCurve EZQ takes the audio signal coming for your factory head unit, restores the frequencies that have been reduced /detuned by Toyota, then supplies a balanced preamp output to your amp(s). Additionally, you have the ability to adjust the sound to your taste! Want more bass? Want less highs? Not a problem! Be sure to check out our installation videos. We walk you through the entire process.

 

 

FAQ:

Does this work with the Entune system?

YES! It also works with a number of Toyota Tacomas. We have tested this unit from 2005 Toyota Tacoma to the 2014 Toyota Tacoma with Entune. When you order you will be prompted to include the year and model of your Tacoma to ensure we send the correct items you will need to get this installed quickly and easily

Do I need an amplifier too, or does the TACQEzQ help my speakers sound better?

The ReCurve EZQ is not an amplifier, as stated above. The primary purpose of the TACOEzQ is to restore the audio frequencies your amplifier(s) need to obtain great sound quality from your stock head unit. Yes, you will need an amp(s), depending on what you plan to install in your Toyota. Be sure to check out our turnkey No need to waste a bunch of time trying to figure out what will work AND sound amazing!

Does tacotunes.com recommend an amp to work with the TACOEzQ?

We have tested and used this setup with a number of high quality amps to ensure the best solution for our customers. Our current list of amps that we recommend are as follows: (1) Exile Javelin 5 Channel Amplifier (2) Alpine PDXV9 Amplifier 5 Channel Amplifier (3) JL Audio HD900/5. However, you can use just about any quality amplifier. Some other examples, Alpine PDXF4 and Alpine PDXM6 amps can be used together . . We have started to offer the Exile Javelin amp as our primary amp in our SQ1 packages. The Exile amp will fit under the front seat of your Toyota, provide nearly 100 watts to Front and Rear speakers AND a whopping 800 watts to the subwoofer. This is a perfect match for our SQ1 system. Remote bass knob makes it a perfect setup for in-car listening and crank it up tailgating sound!

Why do I need the Recuve EzQ?  I have used line out converters (LOC) in the past . . LOCs will do the same thing, right?

You can use LOCs to obtain a louder system. However, most of our customers are looking for sound quality not just volume. As we have mentioned above, most auto manufacturers including Toyota will detune a system by reducing frequencies the stock system is unable to reproduce. Most auto manufacturers do this so they can squeeze more power out of the system and allow you to turn the volume up louder by powering the stock speakers with the frequency range they can handle. However, the reason you are reading this information is because of the crappy sound coming from your stock speakers J. Also in most cases, people have used one LOC to add a subwoofer to the factory system. Sure you will get some bass, but it will leave you wondering it just doesn’t sound right. If you used LOCS to setup front, rear and subwoofer outputs you would need multiple LOCS. Plus you will still be spending hours trying to locate wires only to end up with a subpar system. Regardless of the quality of the LOC that you use, an LOC does not restore the missing frequencies. And most of the requests that lead to the development of the Recruve EzQ came from folks that initially installed LOCs or lower quality units that try to perform the same functions as the ReCurve EZQ.

There are similar products to the ReCurve EZQ. What makes this unit better?

First off, our plug and play system is the first of its kind in the industry. At the time we released/began field testing the ReCurve EZQ. No other manufacturer was offering a turnkey wiring harness and equalization device geared directly toward the Toyota Tacoma market.  Additionally, we have not seen any systems that offer an optional subwoofer control module, an auxiliary input, and use only high quality materials in the production of the unit. Just one look at Recruve EzQ and you can see the high quality parts and design. The RCA input// output connectors we used are the same you will find on high end amplifiers and the tiffany style connectors ensure a long product life. The number one reason for failure in amps and head units is stress on the circuit boards caused by cutting corners on RCA connections.

Side notes:

We build our systems for sound quality. I often get requests from customers that want to add a sub to their stock system. My personal opinion is why would you go through all the work of running power wire, run RCA(s) and then end up with a system that has a subwoofer that drowns out the rest of the system? I try to understand how some people just like bass only, but I can’t! When people listen to our systems, I always here the same thing: “WOW! That is so clear and balanced.” The highs, mids and subs all work together to create amazing sound. My biggest satisfaction is when I turn the keys over to a customer as he / she grins from ear to ear!

Line Out Converters (bolded) Personal opinions on LOCs:  I have heard a lot of systems that used LOCs to connect the stock head unit to aftermarket amps. Quite honestly, a lot of guys are just happy with a louder system. Our goal is not to create LOUD systems but rather amazing sound that enhances your drive time. A byproduct is the ability to turn up the sound LOUD and enjoy music while tailgating. However our first goal is to achieve a sound paradise in your Toyota Tacoma.

Powered Subs

I have been in car audio for many years. I started at age 15 tinkering with my first hand me down car. My first installation, I used a voltmeter and black tape to add an aftermarket system without using a harness adapter (YUK what a messy installation). Spent hours figuring out the color codes and splicing the factory wire harness. My first subwoofer was a powered “tube” subwoofer. I don’t want to mention product names, but you can get the picture. At first I was happy with what I thought was bass. But as each day went by I was not happy with the sound quality. My grandfather used to tell me. A “smart” person learns from his own mistakes. A “wise” man learns from other people’s mistakes.  My point? I want to help guide you so you avoid making the same mistakes I, along with millions of others, have made in building an audio system. All that to say, powered subwoofers will leave you wanting more. IMO, save your money and do it right. A subwoofer requires three things: power, mass and control. At this point in time there is no way to reproduce the lower end of the frequency range without a subwoofer. To do this you need a good amount of power, the mass and “excursion” of a subwoofer and the control of a good quality subwoofer and the box that is matched to the subwoofer. When all the parts work together NO one will say they don’t need a subwoofer when they hear a properly tuned system.

Entune is a trademark of Toyota Motor Sales USA Inc., please see the Toyota website for additional information on the Entune system.

Entune encompasses the complete audio display stack of your vehicle – including Bluetooth, voice recognition, USB, aux port, navigation, and your display screen. On select, premium audio head units, you have access to navigation and a rich set of Apps and Data Services, now referred to as the “Entune® App Suite”.

Posted on

How to add amplifier to stock stereo head unit and have great sound quality

How to add amplifier to stock stereo head unit and have great sound quality Toyota Tacoma

You love your Toyota Tacoma Double Cab but not really enjoying the sound quality coming from the factory stereo?  Until recently, many audio enthusiasts looking for great sound quality, including myself would generally recommend replacing the factory stereo (head unit) with a QUALITY aftermarket head unit. Why? Well most QUALITY aftermarket head units are setup for great sound. They are NOT detuned like factory head units. It used to be VERY difficult to get great sound quality from a factory stereo.   Sure you can make it “loud” but loud does not mean great sound quality.

These days Toyota is including a ton of great features in their factory stereos. At the time of this video, many of the stock units have Bluetooth, Internet search capability, navigation (GPS), steering wheel controls, IPod and auxiliary inputs, HD radio, satellite radio and the list just goes on and on . . So it really does not make sense to replace the stock head unit when they include all these great features. Plus a car stereo that looks factory or “stealth” is more likely to detour thieves.  After a large number of requests from Toyota Tacoma owners we decided to produce a product that makes it easy to keep your factory stereo while paving the road to AMAZING sound quality.

Tacotunes  is excited to introduce the TACOEzQ. The TACOEzQ has been in development for nearly 3 years. We have been testing it in a number of Toyotas here in San Antonio . . .  from base model 2005 Toyota Tacoma to a 2014 Limited with the Entune system, this little “magic box” will help you get the sound you are craving from your stock stereo . .  PLUS installation is a SNAP! NO wire cutting splicing, soldering simply plug it in and you are ready to add one or more amplifiers to your Toyota. Gone are the days of wondering; Will this unit work with my version of Windows or support an Apple? What did I do with the configuration CD?, Why can’t I use my steering wheel controls anymore?  No more wasting countless hours reviewing wiring diagrams followed by ruining the factory wiring harness.

To make it even easier, we will tune the EQ for you Toyota Tacoma when you provide the year and body style. PLUS If you purchase one of our turn-key sound quality turnkey packages, this unit will be setup for plug and play from front to back . . Of course everyone has different listening taste so not only did make easy to install, the TACQEzQ is EXTREMELY easy to adjust.

Our goal was simple.  Make it quick and easy to restore amazing sound to your “detuned” factory head unit. Whether you like more or less bass, brighter highs or even want to adjust the mid bass to your desire. It could not be easier than using the TACOEzQ.

So what exactly does the TACOEzQ do for my audio system? The short version; the TACOEzQ takes the audio signal coming for your factory head unit, restores the frequencies that have been reduced /detuned by the factory unit, then supplies a balanced preamp output to your amp(s). Additionally, you have the ability to adjust the sound to your taste! Want more bass? Want less highs? Not a prob! Be sure to check out our installation videos. We walk you through the entire process.